C8051F585-IQ 50MHz 96KB Flash MCU | Silicon Labs
MPN: C8051F585-IQ ✓ פעילC8051F585-IQ סקירה
An 8-bit microcontroller is a compact embedded processing component that integrates a CPU, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The C8051F58x family combines the established 8051 instruction set with a high-performance 50 MHz core, embedded Flash, mixed-signal conversion capability, and serial peripherals. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductor integrated circuits used to control industrial, automotive, and instrumentation products.
Principal device attributes include 96 KB of embedded Flash, approximately 8.25 KB of RAM, a 12-bit ADC, a maximum clock frequency of 50 MHz, and operation from 1.8 V through 5.25 V. The 48-pin TQFP package provides 40 I/O positions according to the product listing data, while the wide temperature range supports applications beyond ordinary commercial environments. The integrated Flash allows firmware, configuration data, and application constants to be stored directly in the controller.
The C8051F58x architecture is designed for embedded control tasks requiring deterministic peripheral access, compact code storage, and mixed-signal measurement. Its 12-bit ADC supports signal acquisition, while the advertised device feature set also identifies programmable hysteresis, configurable response time, low-current operation, and selectable interrupt or reset behavior for external inputs. These characteristics make the device useful when a system must combine control logic with analog measurement in a small package.
Typical C8051F585-IQ applications include industrial instrumentation, automotive electronic modules, digital measurement systems, temperature monitoring, compact control panels, and embedded sensor interfaces. The 96 KB Flash capacity suits firmware that requires more program storage than a small 8-bit controller, while the 1.8 V minimum operating voltage allows integration with low-voltage sensor and communication circuitry.
PCB implementation should preserve the exact 48-pin TQFP land pattern, provide appropriate decoupling across the operating supply range, and route high-impedance analog inputs away from switching and digital output paths. Firmware development should use Silicon Labs tooling compatible with the C8051F58x family. Before replacing another microcontroller, verify pin multiplexing, interrupt assignments, memory organization, ADC behavior, and clock requirements rather than relying only on package compatibility.
This product page combines the C8051F585-IQ specification summary, sourcing information, same-family alternatives, application guidance, and design cautions for engineers evaluating a compact 50 MHz 8-bit Flash microcontroller.
חלופות תחליף ישיר עבור C8051F585-IQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם C8051F585-IQ (אותו גורם צורה וטביעת רגל) — שונים ב Product Type.
C8051F580-IQ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
C8051F586-IQ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
C8051F585-IQ דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit microcontroller |
| Series | C8051F58x |
| Processor Family | 8051 |
| תדר שעון מקסימלי | 50 MHz |
| Flash Memory | 96 KB |
| Flash Organization | 96K x 8 bits |
| RAM Size | 8.25 KB |
| ADC Resolution | 12 bits |
| Supply Voltage Range | 1.8 V to 5.25 V |
| טווח טמפרטורת פעולה | -40°C to +125°C |
| Package Type | 48-pin TQFP |
| Package Dimensions | 7 x 7 mm |
| I/O Count | 40 |
| סוג הרכבה | Surface mount |
| סטטוס RoHS | Compliant |
| Application Classification | Automotive and industrial |
מדריך תצורת פינים של C8051F585-IQ 7 x 7 mm
תצורת פינים עבור C8051F585-IQ (מארזת 7 x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור C8051F585-IQ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
C8051F585-IQ מתאים עבור 6 יישוםs: Industrial Sensor Control, Automotive Electronic Control Module, Temperature Monitoring System, Digital Measurement Instrument, Low-Voltage Embedded Control, Compact Communication Controller.
Industrial Sensor Control
The C8051F585-IQ fits compact industrial sensor controllers because it combines a 50 MHz 8051 core, 96 KB of embedded Flash, 8.25 KB of RAM, and a 12-bit ADC. It can execute acquisition, filtering, threshold, and actuator-control logic while operating across the -40°C to +125°C range. Place the controller between the sensor front end and the system communication interface, and isolate analog input routing from switching nodes to preserve measurement quality.
מומלץ
Automotive Electronic Control Module
The C8051F585-IQ is suitable for automotive electronic modules that require an extended -40°C to +125°C operating range, 1.8 V to 5.25 V supply capability, and integrated mixed-signal measurement. Its 50 MHz 8-bit core can manage digital logic and supervisory functions, while the 12-bit ADC supports sensor interfaces. Automotive use still requires validation of transient immunity, EMC behavior, environmental stress, and all applicable OEM qualification criteria.
מומלץ
Temperature Monitoring System
The C8051F585-IQ can form the basis of a temperature-monitoring system by combining control code in 96 KB of Flash with its integrated 12-bit ADC. Firmware can acquire readings, apply calibration, compare thresholds, and report status through the device's serial peripherals. Because the ADC is an embedded mixed-signal resource, use the datasheet's recommended reference and layout practices to limit conversion error, especially near the 1.8 V minimum supply condition.
מומלץ
Digital Measurement Instrument
For a digital measurement instrument, the C8051F585-IQ provides enough Flash for 96 KB of embedded code and enough CPU speed for a 50 MHz 8-bit control loop. The 12-bit ADC supports analog measurement, while the available communications can connect the instrument to a host or local display controller. Validate the selected ADC channel, reference voltage, acquisition timing, and serial protocol against the exact operating conditions before releasing the design.
מומלץ
Low-Voltage Embedded Control
The 1.8 V to 5.25 V operating range makes the C8051F585-IQ appropriate for low-voltage embedded controllers that cannot rely on a 5 V-only supply. Its 50 MHz core provides control throughput, and 96 KB of Flash accommodates substantial application firmware. Power budgeting should account for the actual clock, active peripherals, I/O state, and temperature because the available product summary does not establish one universal current consumption.
מומלץ
Compact Communication Controller
The C8051F585-IQ can serve as a compact communication controller for an industrial or sensor node by using its 50 MHz processing capability alongside the C8051F58x peripheral set. Firmware can frame data, maintain protocol timing, perform local decisions, and buffer information without an external processor. Confirm the required serial interface, pin multiplexing, maximum bus rate, and clock configuration in the manufacturer datasheet before assigning communication pins.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור C8051F585-IQ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | C8051F580-IQ | C8051F586-IQ |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) |
| Series | C8051F58x | C8051F58x | C8051F58x |
מבדילים עיקריים
- More Flash than the C8051F580-IQ (לעומתC8051F580-IQ)
- Complete 50 MHz performance specification (לעומתC8051F586-IQ)
- Wide industrial temperature operation (לעומתC8051F580-IQ)
הערות תכנון
Use the manufacturer land pattern for the 48-pin TQFP package and preserve the exposed perimeter geometry beneath the leads. Place supply decoupling capacitors adjacent to the designated power and ground pins, then route high-current and switching-node connections away from ADC inputs. The C8051F58x product page identifies packages from 32 to 48 pins, so the exact 48-pin drawing must be selected during PCB-library creation.
Design the supply for the full 1.8 V to 5.25 V operating range while budgeting for the selected clock, enabled peripherals, I/O loading, and ambient temperature. Confirm the active and sleep-mode currents in the manufacturer datasheet rather than deriving them from the product summary. Use a regulated source with appropriate startup behavior and verify that brownout, reset, and power-sequencing requirements match the system architecture.
Treat analog inputs associated with the 12-bit ADC as sensitive nodes. Keep traces short, avoid switching outputs beneath the analog front end, use a quiet reference arrangement, and provide filtering appropriate to the measured bandwidth. The listed feature set includes programmable hysteresis and response time, which can simplify external input conditioning, but the electrical thresholds and timing must be configured from the C8051F58x datasheet.
Do not assume that two 48-pin C8051F58x devices are interchangeable solely because their packages match. The C8051F580-IQ has 128 KB of Flash compared with 96 KB for the C8051F585-IQ, which can affect absolute addresses, linker output, and assumptions about code placement. Revalidate the boot path, interrupt vector table, peripheral configuration, ADC channels, serial interfaces, and clock initialization after any substitution.
מידע על תאימות
The published component listing identifies the C8051F585-IQ as RoHS compliant and describes the C8051F58x family for automotive and industrial applications. No explicit REACH, AEC-Q100, halogen-free, or conflict-minerals statement was found in the retrieved data.