C8051F808-GU - 8-Bit 25MHz 16KB Flash MCU | Silicon Labs
MPN: C8051F808-GU ✗ סוף ייצורC8051F808-GU סקירה
A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one device. The C8051F80x family occupies the 8-bit embedded-control segment of the broader microcontroller hierarchy. It provides a familiar 8051 instruction-set environment while adding integrated flash memory, mixed-signal peripherals, and dedicated I/O that reduce the component count of small control systems.
The verified product information identifies an 8-bit processor, a 25 MHz maximum operating frequency, and 16 KB of flash organized as 16K x 8. Its 24-QSOP package is described elsewhere in the technical listing as 24-SSOP with a 0.154-inch, 3.90 mm body width. This combination is useful when designers need more board area than an 8-pin or 20-pin device but prefer a small surface-mount outline over larger leaded packages.
The C8051F808-GU belongs to Silicon Labs' Mixed Signal ISP Flash MCU family. Its integrated flash supports in-system programming, while the C8051 core is intended for compact control logic, sensor conditioning, digital communication, and general-purpose embedded applications. Because this is an 8-bit MCU, software performance depends on instruction efficiency, interrupt handling, and peripheral integration rather than wide parallel processing.
Typical applications include industrial sensor nodes, small motor controllers, building and access-control modules, communication equipment, and compact consumer products. A 25 MHz clock provides useful headroom for protocol processing and control tasks, while 16 KB of flash provides room for boot code, application logic, configuration, and field-update routines in appropriately sized firmware.
Designers should verify the complete pin assignment, electrical limits, oscillator requirements, and programming interface in the manufacturer datasheet before layout. QSOP lead pitch and pad geometry must be checked against the PCB footprint, and unused I/O pins should follow the device guidance rather than being assigned arbitrarily.
This page combines the exact catalog identity, package information, technical specifications, sourcing guidance, and design considerations needed to evaluate the C8051F808-GU. It also distinguishes the obsolete tube-packaged ordering code from verified pin-compatible substitutes, helping designers avoid assuming that a different package or an incomplete cross-reference result is a true drop-in replacement.
חלופות תחליף ישיר עבור C8051F808-GU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותC8051F808-GU דירוגים מרביים ומאפיינים חשמליים
| Processor Core | 8051, 8-bit |
| Product Series | C8051F80x |
| Maximum CPU Frequency | 25 MHz |
| Program Memory Size | 16 KB |
| Program Memory Organization | 16K x 8 |
| Program Memory Type | Flash |
| Device Type | 8-bit Microcontroller |
| מתח אספקה | 3 V |
| מארז | 24-QSOP |
| Case Description | 24-SSOP, 0.154-inch, 3.90 mm width |
| סוג הרכבה | Surface Mount |
| Programming Interface | In-System Programming |
| Product Family | Mixed Signal ISP Flash MCU |
| Instruction Set | 8051-compatible CISC |
| Core Processor | 8051 |
מדריך תצורת פינים של C8051F808-GU 24-ssop, 0.154-inch, 3.90 mm width
תצורת פינים עבור C8051F808-GU (מארזת 24-ssop, 0.154-inch, 3.90 mm width). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור C8051F808-GU.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
C8051F808-GU מתאים עבור 6 יישוםs: Legacy Industrial Sensor Controller, Building Access-Control Module, Compact Motor and Relay Control, Communication Gateway and Protocol Node, Consumer Peripheral Controller, Data-Acquisition Front End.
Legacy Industrial Sensor Controller
C8051F808-GU can serve as the control processor in an existing industrial sensor module whose firmware targets the C8051F80x architecture and whose PCB uses the 24-QSOP footprint. Its 8-bit core, 25 MHz maximum clock, and 16 KB flash provide enough resources for sensor selection, threshold logic, status reporting, and local configuration. The principal limitation is the obsolete lifecycle, so this choice is most appropriate for maintenance and controlled continuation of an installed platform rather than a new product line.
מומלץ
Building Access-Control Module
The C8051F808-GU is applicable to a legacy access-control reader or door-control module that already depends on the C8051F80x software environment and a 24-QSOP board layout. Its 25 MHz 8-bit processor can coordinate keypad or credential input, relay or lock control, indicator feedback, and serial communications, while 16 KB of flash holds application and configuration logic. Because the controller is obsolete, deployment should include a longevity plan, controlled purchasing, and validation of all peripheral functions after replacement sourcing.
מומלץ
Compact Motor and Relay Control
C8051F808-GU can be retained in a compact legacy relay, solenoid, or small motor-control board that requires an 8-bit embedded controller and already matches the 24-QSOP land pattern. Its 25 MHz operating ceiling and 16 KB flash can support deterministic control loops, interlocks, timing, fault handling, and communications. The design must account for switching-node isolation, output-driver protection, decoupling, and thermal requirements separately from the MCU itself, since those ratings are not established by the core and memory specifications.
מומלץ
Communication Gateway and Protocol Node
C8051F808-GU is suitable for an obsolete low-rate protocol node that uses an 8-bit 8051-compatible core, 16 KB of flash, and the 24-QSOP package. At a 25 MHz maximum clock, it can execute framing, command parsing, state management, and local diagnostics around UART, serial, or other onboard interfaces. For an active redesign, evaluate a current MCU with equivalent peripheral behavior and protocol timing, because application support, tooling, and device availability matter more than raw instruction throughput.
מומלץ
Consumer Peripheral Controller
The C8051F808-GU can control a legacy consumer peripheral requiring button handling, LED indication, simple timing, and serial coordination. Its 16 KB flash stores application logic and configuration, while the 25 MHz 8-bit core is sufficient for straightforward embedded tasks. The 24-QSOP package provides a practical leaded alternative to very small QFN packages, but consumers should verify assembly capability and soldering requirements. New retail products should normally use a supported device with a current supply and qualification path.
מומלץ
Data-Acquisition Front End
C8051F808-GU may be used in a legacy data-acquisition module where the C8051F80x mixed-signal platform, 25 MHz core, and 16 KB flash are already integrated into the board design. The controller can orchestrate sensor selection, conversion sequencing, filtering, threshold evaluation, and data transfer. Exact analog inputs, sample rates, ADC characteristics, and memory map must be taken from the family documentation rather than inferred from the processor frequency. A redesign should preserve those measurement requirements while moving to a supported MCU and revalidating calibration and noise performance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור C8051F808-GU — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Silicon Labs |
| Package | 24-QSOP |
| Processor Core | 8051, 8-bit |
| Maximum CPU Frequency | 25 MHz |
| Program Memory Size | 16 KB |
| Program Memory Type | Flash |
| Supply Voltage | 3 V |
| Programming Interface | In-System Programming |
| Lifecycle Status | Obsolete |
| Product Family | C8051F80x Mixed Signal ISP Flash MCU |
מבדילים עיקריים
- Obsolete 24-QSOP form retained for legacy maintenance (לעומתC8051F808-GM)
- 25 MHz performance within an 8-bit embedded platform (לעומתC8051F808-GUR)
- Integrated flash and in-system programming (לעומתC8051F996-C-GU)
הערות תכנון
Confirm that the PCB land pattern matches the 24-QSOP or 24-SSOP outline and its specified lead pitch, body width, and toe geometry. The verified case description gives a 0.154-inch, 3.90 mm body width, but a complete footprint should also be checked against the manufacturer drawing. Maintain assembly tolerances suitable for a fine-pitch QSOP package and verify solder-paste volume before releasing a production board.
Use the manufacturer power-pin and decoupling recommendations when assigning the 3 V supply. Place the required bypass capacitors close to their associated supply pins, with a short return path to the ground reference. Because the operating current, internal analog blocks, and detailed supply limits are not established in the available product listing, validate quiescent current and load transients against the full family datasheet before finalizing the power tree.
Do not treat C8051F808-GUR as a suffix-identical replacement: the verified ordering data distinguishes tape-and-reel packaging from the GU tube ordering code. Also avoid treating C8051F808-GM as a drop-in part because its VFQFN-20 package differs from the 24-QSOP target. For maintenance designs, request traceability and confirm the exact physical marking; for new designs, treat the obsolete target as a migration trigger.
Assign oscillator, reset, programming, and exposed I/O functions strictly from the datasheet pin-description table. Keep sensitive analog or timing routes away from switching nodes and high-current return paths, and preserve a stable ground reference beneath the device where practical. Before schematic release, verify each alternate-function mux and the startup state of every unused pin; these details cannot be inferred safely from the 8051 family name alone.
מידע על תאימות
The available product listings do not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to the cataloged ordering code.