CD4054BFX - 4-Channel CMOS LCD Driver | Texas Instruments
MPN: CD4054BFX ✓ פעילCD4054BFX סקירה
A CMOS display driver is a logic integrated circuit that translates control signals into the voltage and timing conditions required by display circuitry. LCD drivers occupy the logic IC > display-driver portion of the broader semiconductor hierarchy and commonly combine binary logic, multiplexing control, and level-compatible output functions. The CD4054B family provides four channels in one package, reducing component count and simplifying routing compared with four separate single-channel circuits.
The principal documented features are its four-channel organization, 3 V to 18 V operating range, and suitability for CMOS liquid-crystal display drivers. Because it operates across a broad supply-voltage span, the device can support systems using either a 3.3 V or a 5 V logic environment and can also be considered in higher-voltage CMOS designs where the selected grade permits it. The four channels also make the device useful for repetitive display functions such as segment-enable generation or multiple buffered logic lines.
CD4000-family logic devices use complementary MOS circuitry and are designed for low-power digital systems. The CD4054BFX functions as a buffer rather than as a memory device, so its principal design concern is correct logic-level compatibility, supply sequencing, and the voltage applied to each input. Because the display interface can be sensitive to timing and thresholds, designers should preserve the manufacturer’s input limits and unused-pin treatment rather than inferring behavior from general-purpose logic conventions.
Typical uses include multiplexed liquid-crystal display control, instrument-panel indication, small character displays, industrial operator interfaces, and embedded systems that require several buffered display-control signals. In a multiplexed LCD system, the device can help distribute segment or common-plane control signals while reducing the number of discrete buffers. Application suitability depends on the display’s voltage scheme, scan timing, required logic levels, and temperature range.
For a new layout, assign the package footprint from the authoritative CD4054B ordering table and verify the pin arrangement before routing. Use pull-up or pull-down resistors only where the interface specification requires defined levels during reset or power transitions. Check unused inputs, supply decoupling, and display timing at the system level because incorrect biasing can create unstable segment contrast even when the logic output itself is operating correctly.
This product page consolidates the manufacturer’s device description, technical constraints, package information, sourcing guidance, and drop-in alternatives. It also adds engineering-focused selection criteria, application context, and design notes to help engineers evaluate the CD4054BFX before committing a PCB footprint or production BOM.
חלופות תחליף ישיר עבור CD4054BFX — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
CD4054BM
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
CD4054BFX דירוגים מרביים ומאפיינים חשמליים
| Product Type | 4-channel CMOS liquid-crystal display driver buffer |
| Number of Channels | 4 channels |
| מתח אספקה פעיל | 3 V to 18 V |
| Logic Family | CD4000 CMOS series |
| פונקציה | Quad logic buffer |
| Package Type | 16-pin surface-mount package |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של CD4054BFX 16-pin surface-mount package
תצורת פינים עבור CD4054BFX (מארזת 16-pin surface-mount package). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור CD4054BFX.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
CD4054BFX מתאים עבור 6 יישוםs: Multiplexed LCD Segment Control, Industrial Instrument Panel, Embedded Character Display, Meter and Measurement Readout, Legacy Display Board Maintenance, Portable LCD Interface.
Multiplexed LCD Segment Control
The CD4054BFX fits multiplexed liquid-crystal display control because it combines four channels in one 16-pin surface-mount package and supports a 3 V to 18 V operating range. Place it between the display-control logic and the segment or common-plane drive interface when the system uses CMOS-compatible levels. The four-channel organization reduces the number of separate buffers and simplifies routing compared with four discrete one-channel devices. Designers must still verify output configuration, propagation timing, and input thresholds against the display timing and voltage scheme before finalizing the interface.
מומלץ
Industrial Instrument Panel
The CD4054BFX is suitable for industrial instrument panels that distribute multiple display-control signals from a controller to an LCD module. Its four channels provide a compact implementation for repeated segment-enable or auxiliary logic functions, while the 3 V to 18 V operating span covers common 3.3 V and 5 V control environments. For reliable panel operation, account for electrical noise, display bias requirements, and temperature limits. Confirm the selected ordering suffix and package footprint against the production schematic before releasing the PCB.
מומלץ
Embedded Character Display
The CD4054BFX can support an embedded character LCD by buffering several logic outputs between a controller and the display interface. Four dedicated channels provide a practical way to handle repeated enables or distributed control signals without using four separate buffer packages. Its broad 3 V to 18 V supply range allows use in systems built around common CMOS supply levels. The LCD module still determines the required bias, scan rate, and segment voltage, so those requirements must be evaluated separately from the logic-buffer requirements of the CD4054BFX.
מומלץ
Meter and Measurement Readout
The CD4054BFX can be used in meter and measurement readouts where a controller drives a small LCD through several buffered control signals. The four-channel arrangement allows the display interface to remain organized around a single 16-pin device, reducing routing congestion on compact measurement hardware. Its operation from 3 V to 18 V supports common low-voltage instrument logic. For precision instruments, keep display drive noise and power-supply layout separate from sensitive analog sections, and verify that switching in upstream circuitry does not compromise display timing or segment contrast.
מומלץ
Legacy Display Board Maintenance
The CD4054BFX is especially relevant when repairing or maintaining a board built around the original Harris/RCA and Intersil CD4054BFX ordering code. Matching the existing footprint and pin functions can allow a maintenance design to avoid a display-interface redesign. The four-channel, 3 V to 18 V buffer function supports the original LCD control architecture, but engineers must inspect the installed package and pinout rather than relying only on the generic CD4054B name. Use the Request a Quote form to request traceability, condition details, and lot-specific documentation.
מומלץ
Portable LCD Interface
The CD4054BFX can support a portable LCD interface when the display controller operates at a compatible CMOS level and the system has a defined startup sequence. The four buffered channels provide a compact way to distribute display-control outputs, while operation down to 3 V suits many battery-powered designs. The device does not generate LCD bias voltage, so the display module and power circuit must supply the required segment and common-plane voltages. Check input levels during reset and power-off states to prevent unintended current flow or indeterminate display outputs.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CD4054BFX — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CD4054BM |
|---|---|---|
| Package | 16-pin surface-mount package | SOIC-16; verify dimensions against the installed CD4054BFX footprint |
| Brand | Texas Instruments | Texas Instruments |
| Function | 4-channel CMOS LCD driver buffer | 4-channel CMOS LCD driver buffer |
| Number of Channels | 4 channels | 4 channels |
| Operating Supply Voltage | 3 V to 18 V | 3 V to 18 V |
| Logic Technology | CMOS | CMOS |
| Lifecycle Status | Active | Active |
מבדילים עיקריים
- Four display-control channels in one 16-pin package (לעומתCD4054BM)
- Exact legacy ordering designation for maintenance sourcing (לעומתCD4054B)
- Broad operating-supply range for embedded display designs (לעומתCD4054BF)
הערות תכנון
Route the display-control signals using the manufacturer pin-description table for the exact ordering suffix, and compare the physical drawing with the installed component before committing copper. The CD4054BFX is associated with a 16-pin surface-mount package, but a matching pin count does not by itself prove footprint compatibility. Confirm body width, lead span, pitch, pin-one orientation, and whether the supplied landing pattern corresponds to SOIC-16 dimensions. Keep LCD bias and analog sensor traces away from display-control nets where practical.
Place the system’s normal bypass capacitors close to the device supply pins, and route them using a short, low-inductance path to the ground reference. Verify that every connected input remains inside the manufacturer’s permitted input-voltage range during startup, reset, and shutdown. Because an LCD system may combine a low-voltage logic rail with a higher display-bias rail, do not allow controller output states to back-power the display interface. Power off unused LCD inputs externally if the selected device grade does not guarantee a defined state.
Validate display timing with the actual segment and common-plane load rather than treating the CD4054BFX as an unrestricted general-purpose buffer. Compare propagation delay and output transition behavior with the display’s minimum setup and hold requirements. If the LCD module has long cable leads or a slow rising edge, add suitable series damping where the interface specification allows it. Also check whether the selected LCD drive scheme requires inversion, since a standard logic buffer may not provide the required waveform without additional circuitry.
מידע על תאימות
Compliance declarations for the exact CD4054BFX manufacturer and ordering suffix were not identified. AEC-Q100 is not applicable because the device is a general-purpose CMOS display buffer rather than an automotive-qualified product.