CD4536BD - Programmable 24-Bit Timer | Texas Instruments
MPN: CD4536BD ✓ פעילCD4536BD סקירה
A programmable timer is a timing IC that divides an input frequency into selectable time intervals. The CD4536B belongs to the CMOS counter family within the broader timer and clock-and-timing hierarchy. Its configurable counter length, selectable output stage, and external-clock capability make it useful for periodic-event generation, frequency division, time-delay generation, and industrial control logic without requiring a microcontroller.
The principal feature of the CD4536B is its flexible counter architecture. Each of 16 selectable output taps can provide a different division ratio, while the first eight stages can be bypassed to reduce the counting interval. Its outputs have standardized, symmetrical characteristics, and its quiescent current is tested at 20 V across the 5 V, 10 V, and 15 V parametric ratings. The family is designed to meet the stated JEDEC Tentative Standard No. 13B requirements for B-series CMOS devices.
The CD4536BD combines digital counting with analog RC timing functions. An external clock can be applied when precise system-synchronized timing is required, while the internal oscillator permits stand-alone interval generation with external resistor and capacitor values. The selectable output stages let one oscillator or clock source serve several timing tasks, reducing the number of separate timers required in a control design.
Typical uses include industrial pulse and delay generation, repetitive process-control timers, frequency dividers, low-frequency clock generation, programmable pulse trains, and embedded automation systems. The device is also useful in laboratory and test equipment where a selectable division ratio or independently adjustable RC time constant is needed. It can also complement CMOS divider and oscillator products in broader sequential-control systems.
When designing around the CD4536BD, calculate the RC oscillator timing from the manufacturer datasheet's timing equations and component tolerances rather than treating the nominal frequency as exact. Keep external clock edges within the specified input limits, connect unused inputs to defined logic levels, and place decoupling capacitors close to the supply pins. Verify output rise and fall times when driving long traces or high-capacitance loads.
This product page combines the functional architecture of the CD4536B with practical timing guidance, package information, comparison criteria, and focused design notes. It supports faster part selection by distinguishing timer operation from general-purpose counters and highlighting the design checks that matter most for reliable CMOS timing circuits.
חלופות תחליף ישיר עבור CD4536BD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם CD4536BD (אותו גורם צורה וטביעת רגל) — שונים ב Logic Family, Mounting Type, Package, Product Type.
CD4536BM
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
CD4536BDW
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD4536BD מפרטים
| Product Type | Programmable timer and ripple-binary counter |
| Counter Stage Count | 24 stages |
| Maximum Count | 2^24 count events |
| Minimum Count | 1 count event |
| Selectable Output Stages | 16 stages |
| Output Selection Code | 4 bits |
| Bypassable Counter Stages | 8 stages |
| Clock Source Options | External clock or on-chip RC oscillator |
| Logic Family | B-series CMOS |
| Quiescent Current Test Voltage | 20 V |
| Parametric Test Voltages | 5 V, 10 V, and 15 V |
| Quiescent Current Test Condition | 100% tested at 20 V |
| Output Characteristics | Standardized and symmetrical |
| JEDEC Specification | JEDEC Tentative Standard No. 13B for B-series CMOS devices |
| מארז | 16-pin SOIC |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של CD4536BD 16-pin soic
תצורת פינים עבור CD4536BD (מארזת 16-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור CD4536BD.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
CD4536BD מתאים עבור 6 יישוםs: Industrial Process-Control Timers, Programmable Frequency Dividers, RC-Based Pulse Generators, Automatic Test and Measurement Systems, Embedded Automation and Sequencing, Appliance and Control-Timing Circuits.
Industrial Process-Control Timers
The CD4536BD suits industrial process-control sequences that require repeatable delays or periodic trigger events. Its 24 ripple-binary stages allow counting from 1 to 2^24 events, while 16 selectable output taps provide multiple timing ratios from one clock or oscillator. Place the device between the sensor-conditioning logic and actuator-driver interface, and use the selected output to establish an adjustable event interval. Because the RC oscillator depends on component and environmental tolerances, design worst-case timing margins around the intended process timing. The external-clock mode is preferable when synchronization to a system master clock is more important than free-running accuracy.
מומלץ
Programmable Frequency Dividers
The CD4536BD can divide a reference frequency into several programmable output rates without a microcontroller or a bank of separate dividers. A 4-bit selection code accesses one of 16 counter outputs, while bypassing the first eight stages permits shorter division intervals. Feed a clean periodic signal into the external clock input and select the tap that matches the required output frequency. The resulting family of related division ratios is useful in clock-generation, timing-reference, and pulse-distribution circuits. Validate the maximum operating clock rate and output rise time against the trace capacitance and receiving-device thresholds.
מומלץ
RC-Based Pulse Generators
The CD4536BD's internal RC oscillator provides a compact way to generate repetitive pulses without an external clock generator. External resistor and capacitor values determine the nominal oscillation period, while selectable counter outputs create related pulse intervals. This arrangement is appropriate for low-speed sequencing, test stimuli, and periodic control functions where long-term absolute frequency accuracy is not essential. Account for resistor tolerance, capacitor temperature coefficient, and supply variation when defining the operating range. If precise timing is required, replace the free-running RC network with a more stable reference clock applied to the external-clock input.
מומלץ
Automatic Test and Measurement Systems
The CD4536BD is useful in test fixtures that require selectable stimulus intervals without a microcontroller. Its 16 counter outputs can provide several timing ratios from one source, allowing one circuit to control acquisition windows, relay-command delays, or repetitive measurement triggers. Select the counter tap based on the required test duration and route the active-high or active-low output through the fixture's control logic as appropriate. Keep timing-critical traces short and provide local supply bypassing to prevent reference noise from changing the trigger interval. For instrumentation requiring calibrated frequency accuracy, synchronize the device to a laboratory reference rather than relying on an uncalibrated RC time constant.
מומלץ
Embedded Automation and Sequencing
The CD4536BD supports compact automation blocks where a microcontroller needs a backup or auxiliary timing function. A free-running oscillator or external system clock can trigger delayed events, while the selectable counter outputs coordinate multiple stages of a machine sequence. The 16-pin SOIC package allows placement close to the associated logic and reduces board area compared with discrete oscillators and counters. Determine whether the timer operates independently or resets with the controller, and preserve the required output polarity through appropriate interface logic. This arrangement is particularly useful for deterministic delays, watchdog-style intervals, and repetitive actuator commands that do not justify a full programmable timer peripheral.
מומלץ
Appliance and Control-Timing Circuits
The CD4536BD can implement recurring control intervals in appliances, environmental controllers, and other compact sequencing systems. Its configurable counter length helps tailor an interval to the controlled process, while its outputs can trigger a relay driver, indicator, or next-stage logic. The free-running RC configuration minimizes external component count, whereas the external-clock configuration allows the appliance controller to establish a common time base. Check output drive capability before attaching a load directly, use an appropriate transistor for relays or other high-current devices, and include a defined reset path so the sequence starts predictably after power application.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CD4536BD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CD4536BM | CD4536BDW |
|---|---|---|---|
| Product Type | Programmable CMOS timer and ripple-binary counter | Programmable CMOS timer and ripple-binary counter | Programmable CMOS timer and ripple-binary counter |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC - same | 16-pin SOIC - same |
| Counter Stages | 24 ripple-binary stages | 24 ripple-binary stages | 24 ripple-binary stages |
| Selectable Outputs | 16 outputs selected by a 4-bit code | 16 outputs selected by a 4-bit code | 16 outputs selected by a 4-bit code |
| Clocking Modes | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator |
| Maximum Count | 2^24 count events | 2^24 count events | 2^24 count events |
| Logic Family | B-series CMOS | B-series CMOS | B-series CMOS |
| Output Characteristics | Standardized and symmetrical | Standardized and symmetrical | Standardized and symmetrical |
| Quiescent Current Test Condition | 100% tested at 20 V | 100% tested at 20 V | 100% tested at 20 V |
| JEDEC Alignment | JEDEC Tentative Standard No. 13B for B-series CMOS devices | JEDEC Tentative Standard No. 13B for B-series CMOS devices | JEDEC Tentative Standard No. 13B for B-series CMOS devices |
| Orderable Suffix | CD4536BD | CD4536BM | CD4536BDW |
מבדילים עיקריים
- Selectable timing ratios within one timer (לעומתCD4536BM)
- Matched SOIC footprint within the CD4536B family (לעומתCD4536BDW)
- Flexible external-clock or autonomous RC operation (לעומתCD4536BM)
הערות תכנון
Do not assume that every timer output has the same division ratio. The CD4536BD provides 16 selectable outputs and allows the first eight counter stages to be bypassed. Confirm the selected output against the timing diagram before assigning a delay or frequency. Reset behavior and output polarity should also be checked in the manufacturer datasheet because an incorrect interpretation can shift a control sequence by one complete counter interval.
Place the supply-decoupling capacitor immediately between the supply and ground pins, with a short, low-inductance path to the return plane. Keep the external oscillator resistor and capacitor connections compact so board capacitance and leakage do not materially alter the timing network. When using an external clock, provide a clean signal with a rise time compatible with the CD4536B input requirements and maintain the specified supply limits during all operating states.
The CD4536BD is a CMOS timer, so unused inputs must not float. Pull unused input pins to a defined valid logic level and keep external reset and selection traces away from the oscillator components. Output rise and fall times become important when driving long PCB traces, cables, or high-capacitance loads; buffer such outputs when switching-edge distortion could affect downstream timing or cause excessive crosstalk.
Place the RC timing components near the oscillator pins and avoid routing their nets through areas with high switching activity. A solid ground reference beneath the device helps reduce return-path inductance, while short decoupling connections improve supply stability. For an external clock, provide a continuous ground path beneath the trace and match the source impedance where practical, reducing reflections that could cause extra clock-edge counting.
Estimated: with a 10 V supply, a 5 V output, and a 0.1 mA load, a linear timer architecture could dissipate approximately (10 V - 5 V) × 0.1 mA = 0.5 mW, excluding internal oscillator and dynamic current. Actual dissipation depends on the device's internal architecture, switching activity, supply voltage, and load. Confirm the final value with the manufacturer's operating-current and power-dissipation characteristics.
מידע על תאימות
The manufacturer datasheet identifies JEDEC Tentative Standard No. 13B compliance for the B-series CMOS family. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product information and therefore remain unknown.