CY8C3245PVI-150 50MHz 8051 MCU 32KB Flash | Infineon
MPN: CY8C3245PVI-150 ✓ פעילCY8C3245PVI-150 סקירה
A PSoC, or Programmable System-on-Chip, is a mixed-signal microcontroller that integrates a CPU with configurable analog and digital blocks. In the product hierarchy, the CY8C3245PVI-150 belongs to the PSoC 3 CY8C32 family, combining an 8051-class microcontroller core, embedded flash, SRAM, ADC resources, and programmable peripherals. This integration allows designers to tailor signal acquisition, control, and communication functions in a compact embedded system.
The principal features include operation up to 50 MHz, 32 kByte of flash, 4 kByte of SRAM, and a 12-bit ADC. The 1.71 V to 5.5 V operating range supports low-voltage and conventional 3.3 V or 5 V systems. The 48-pin SSOP package provides a compact surface-mount option for industrial embedded-control designs, while the industrial temperature grade supports operation from -40 °C to +85 °C.
The 8051 core is an 8-bit CISC architecture, and the programmable PSoC resources can be configured for mixed-signal control rather than relying on a fixed collection of peripheral functions. The 12-bit ADC provides a practical resolution for monitoring analog sensors, while 32 kByte of flash supplies nonvolatile program storage. ISP-SWD programming support provides a defined programming path for development and production programming.
Typical uses include industrial sensor-control equipment, building and automation controllers, compact embedded instruments, data-acquisition modules, and low-power monitoring systems. A design can use the ADC for analog inputs and the programmable digital resources for timers, communication interfaces, control logic, and signal conditioning. The same architecture is useful when product differentiation requires configurable peripherals rather than a fixed-function microcontroller.
PCB implementation should account for the SSOP-48 footprint and follow the manufacturer's pin-description and layout guidance. Keep analog inputs away from high-current switching paths, provide clean return connections, and place decoupling and signal-integrity components close to their associated pins. ISP-SWD programming requires an accessible connector or test pads and a layout that preserves signal integrity during flashing.
This page combines the manufacturer specifications with focused engineering guidance, parameter comparisons, and practical replacement criteria. It is intended to help engineers evaluate programming compatibility, mixed-signal performance, supply requirements, PCB layout, and system integration before selecting the microcontroller for a new design.
חלופות תחליף ישיר עבור CY8C3245PVI-150 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותCY8C3245PVI-150 דירוגים מרביים ומאפיינים חשמליים
| Product Type | PSoC 3 8-bit microcontroller |
| Product Family | CY8C32 family |
| CPU Core | 8051 8-bit CISC |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 kByte |
| Program Memory Organization | 32K x 8 bits |
| SRAM | 4 kByte |
| ADC Resolution | 12 bits |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Supported Supply Configurations | 2.5 V, 3.3 V, and 5 V |
| מארז | 48-pin SSOP |
| סוג הרכבה | Surface mount |
| Temperature Grade | Industrial |
| Programming Interface | ISP-SWD |
| Qualification | Not qualified |
| Peak Reflow Temperature | 260 °C |
| Maximum Time at Peak Reflow Temperature | 20 s |
| ROM Size | 262,144 bits |
מדריך תצורת פינים של CY8C3245PVI-150 48-pin ssop
תצורת פינים עבור CY8C3245PVI-150 (מארזת 48-pin ssop). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור CY8C3245PVI-150.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
CY8C3245PVI-150 מתאים עבור 6 יישוםs: Industrial Sensor Control, Building Automation, Data Acquisition Module, Programmable Logic Controller, Industrial Communication Controller, Compact Measurement Instrument.
Industrial Sensor Control
The CY8C3245PVI-150 fits industrial sensor-control modules that must acquire analog measurements and perform local control within a compact 48-pin SSOP footprint. Its 12-bit ADC is suitable for sensors producing modest-resolution control data, while the 50 MHz 8051 core provides timing for filtering, compensation, and supervisory logic. The 32 kByte flash stores application firmware, calibration constants, and configuration data, and 4 kByte of SRAM supports working buffers. Use the programmable PSoC resources to place signal conditioning and control functions close to the sensor interface, reducing board area while preserving ISP-SWD access for updates.
מומלץ
Building Automation
The CY8C3245PVI-150 is appropriate for compact building-automation controllers that combine sensor monitoring with digital control outputs. Its 12-bit ADC can sample resistive, current-based, or other analog environmental sensors, while the 50 MHz processor can execute debounce logic, scheduling, fault detection, and communication tasks. The 32 kByte flash is sufficient for a dedicated control application, and the 4 kByte SRAM accommodates protocol and measurement buffers. Designers can use programmable PSoC blocks to tailor timer and interrupt behavior, but should verify start-up sequencing and external interface levels against the final power architecture.
מומלץ
Data Acquisition Module
The CY8C3245PVI-150 can serve as the control element in a compact data-acquisition module where sensor outputs must be digitized, processed, and forwarded through a serial interface. The 12-bit ADC provides a useful balance between measurement resolution and embedded processing capability, while the 50 MHz 8051 core handles averaging, calibration, and data packing. With 32 kByte of flash and 4 kByte of SRAM, the device can hold firmware and short-term measurement data without external storage. Keep analog traces short, isolate them from switching nodes, and use the pin-description table when assigning channels and communications signals.
מומלץ
Programmable Logic Controller
The CY8C3245PVI-150 is suitable for small programmable logic controllers that coordinate digital inputs, analog measurements, timing functions, and output states. Its programmable mixed-signal architecture allows a designer to configure suitable counter, timer, interrupt, and control functions rather than relying exclusively on a fixed peripheral map. The 32 kByte flash holds the control program, while 4 kByte of SRAM supports state variables and communication buffers. The SSOP-48 package permits compact control boards, although fanout and track spacing must be checked carefully during schematic capture and PCB layout.
מומלץ
Industrial Communication Controller
The CY8C3245PVI-150 can act as a communication endpoint in equipment that also performs monitoring and control. Its 50 MHz 8051 core supports protocol handling, while the 32 kByte flash accommodates firmware and configuration tables and the 4 kByte SRAM supports message processing. The PSoC programmable resources can support timers, interrupts, and digital signaling functions around the communications interface. Select a transceiver that matches the physical-layer voltage, impedance, and isolation requirements. The microcontroller's 1.71 V to 5.5 V operating range does not remove the need to verify each external interface's logic levels.
מומלץ
Compact Measurement Instrument
The CY8C3245PVI-150 supports compact measurement instruments that combine an analog input, local processing, and a simple digital interface. The 12-bit ADC is adequate for many process-control and diagnostic signals, while the 50 MHz core can perform linearization, filtering, limit checks, and calibration adjustments. Firmware and calibration values fit within the 32 kByte flash, and the 4 kByte SRAM supports acquisition and display-driver buffers. Use the industrial temperature grade for equipment exposed to variable ambient conditions, and validate the analog input network and reference arrangement against the manufacturer electrical characteristics.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CY8C3245PVI-150 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Infineon Technologies |
| Package | 48-pin SSOP |
| CPU Architecture | 8-bit 8051 CISC |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 kByte |
| SRAM | 4 kByte |
| ADC Resolution | 12 bits |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programming Interface | ISP-SWD |
| Temperature Grade | Industrial |
מבדילים עיקריים
- Integrated programmable mixed-signal architecture (לעומתATMEGA324A-CUR)
- Compact 48-pin SSOP implementation (לעומתATMEGA324A-CUR)
- Dedicated ISP-SWD programming support (לעומתATMEGA324A-CUR)
הערות תכנון
Route the 48-pin SSOP footprint exactly from the official package drawing and preserve clearances around adjacent leads. Place decoupling capacitors adjacent to the applicable supply pins and route each capacitor directly to the ground reference plane. Because the PSoC combines digital and analog resources, partition analog inputs away from clocks, high-current outputs, and switching-regulator nodes to minimize coupling into the 12-bit ADC.
Provide an ISP-SWD programming interface through a connector, pads, or test points that production technicians can physically access. Follow the recommended signal ordering and termination arrangement in the manufacturer programming documentation. Keep programming traces away from noisy analog inputs and provide a stable clock and supply during attachment so that programming does not depend on uncertain external conditions.
Design the supply network for the complete 1.71 V to 5.5 V operating range and the selected 2.5 V, 3.3 V, or 5 V configuration. Verify regulator startup, load transients, and the voltage limits associated with every attached peripheral before power is applied. The microcontroller's low-voltage capability does not imply that every I/O remains compatible at the minimum rail; use the manufacturer pin characteristics to select pull-ups, level shifters, and external interface components.
Treat analog and digital signals according to their configured functions rather than assuming every peripheral is available at every pin. Check alternate-function mappings, interrupt assignments, and special analog pins in the manufacturer pin-description table. For sensitive measurements, use short traces, a continuous ground reference, and filtering located near the source; excessive copper or long parallel digital routes can increase coupling and degrade the usable ADC performance.
מידע על תאימות
The ordering information identifies the device as industrial grade and not qualified, with a 260 °C peak reflow temperature and a 20-second maximum peak-reflow duration. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the supplied manufacturer and distributor information.