DSPIC30F5011-20I/PT - 16-bit DSC, 66KB Flash, 64-TQFP | Microchip
MPN: DSPIC30F5011-20I/PT ✓ פעילDSPIC30F5011-20I/PT סקירה
A Digital Signal Controller (DSC) is a class of microcontroller that integrates a Digital Signal Processor (DSP) engine with a general-purpose MCU on a single die, enabling deterministic real-time control with single-cycle MAC operations for high-throughput math. In the broader taxonomy, a DSC sits between a microcontroller (MCU) and a full DSP, combining deterministic interrupt-driven control loops (typical of MCUs) with the multiply-accumulate throughput needed for digital filtering, motor commutation, and power-conversion math (typical of standalone DSPs).
Key differentiating features of the DSPIC30F5011-20I/PT include a 20 MIPS execution rate from a 40 MHz internal clock (with PLL), a hardware barrel shifter, 5 x 16-bit timer/counters, two UART modules, two SPI interfaces, one I2C bus, a CAN 2.0B module, an 8-channel 10-bit ADC at 500 ksps, and up to 52 digital I/O pins. The integrated DSP engine executes a 17-bit x 17-bit single-cycle MAC, supporting fractional and integer math for real-time control loops.
Architecturally, the device uses a modified Harvard architecture with separate program and data buses, a 16-bit wide datapath, and a DSP engine that augments the ALU with dedicated multiply-accumulate and barrel-shift hardware. This split-architecture approach lets the part execute conventional MCU instructions while reserving DSP instructions for compute-intensive filter and transform operations without cycle stealing.
Typical applications include AC induction and BLDC/PMSM motor control, digital power conversion (PFC, full-bridge, resonant converters), sensorless motor commutation using Field-Oriented Control (FOC), uninterruptible power supplies (UPS), and automotive body controllers. The CAN 2.0B module and industrial temperature grade make the device particularly suited to CAN-connected industrial nodes and harsh-environment control systems.
When designing with this device, allocate a 2.5V to 5.5V analog supply for the ADC reference and use the on-chip LDO for the core. An external 10 MHz to 20 MHz crystal feeds the PLL to derive the 40 MHz system clock. Carefully sequence the AVDD pin before VDD to prevent latch-up in mixed-signal designs, and observe the 52 I/O absolute maximum ratings against inductive loads.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement - rather than duplicate - the manufacturer datasheet, giving procurement and engineering teams a single decision-ready reference.
חלופות תחליף ישיר עבור DSPIC30F5011-20I/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם DSPIC30F5011-20I/PT (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, DSP Engine, Operating Temperature, Timers.
DSPIC30F5011-30I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC30F5013-20I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
DSPIC30F5011T-20I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
DSPIC30F4013-20I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC30F5011-20I/PTG
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
DSPIC30F5011-20I/PT דירוגים מרביים ומאפיינים חשמליים
| Product Type | 16-bit Digital Signal Controller (DSC) |
| CPU Core | dsPIC30F (modified Harvard, DSP-enhanced RISC) |
| Maximum CPU Speed | 20 MIPS (40 MHz internal clock) |
| Program Flash | 66 KB |
| Data RAM | 4 KB |
| Data EEPROM | 1 KB |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| טמפרטורת פעולה | -40 C to +85 C (Industrial, "I" grade) |
| מארז | 64-pin TQFP (10 x 10 mm) |
| I/O Pins | 52 (functional) |
| ADC | 10-bit, up to 1 Msps (500 ksps typical) |
| Timers | 5 x 16-bit timer/counters |
| Communication Interfaces | 2x UART, 2x SPI, 1x I2C, 1x CAN 2.0B |
| DSP Engine | 17 x 17-bit single-cycle MAC, 40-bit accumulator, hardware barrel shifter |
| DMA | 8-channel |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant (lead-free, per Microchip product page) |
תצורת פינים של DSPIC30F5011-20I/PT
| פין 1 | AN0/RB0 — Analog input 0 / I/O port B0 |
| פין 2 | AN1/RB1 — Analog input 1 / I/O port B1 |
| פין 3 | AN2/RB2 — Analog input 2 / I/O port B2 |
| פין 4 | AN3/RB3 — Analog input 3 / I/O port B3 |
| פין 5 | AN4/RB4 — Analog input 4 / I/O port B4 |
| פין 6 | AN5/RB5 — Analog input 5 / I/O port B5 |
| פין 7 | AVSS — Analog ground reference |
| פין 8 | AVDD — Analog positive supply (2.5V-5.5V) |
| פין 9 | MCLR — Master clear (reset) input, active low |
| פין 10 | OSC1 — External crystal/oscillator input |
| פין 11 | OSC2 — External crystal/oscillator output |
| פין 12 | RC15 — I/O port C15 |
| פין 13 | RC13 — I/O port C13 |
| פין 14 | RC14 — I/O port C14 |
| פין 15 | VSS — Digital ground |
| פין 16 | VDD — Digital positive supply (2.5V-5.5V) |
| פין 17 | RD8 — I/O port D8 |
| פין 18 | RD9 — I/O port D9 |
| פין 19 | RD10 — I/O port D10 |
| פין 20 | RD11 — I/O port D11 |
| פין 21 | RD12 — I/O port D12 |
| פין 22 | RD13 — I/O port D13 |
| פין 23 | RD14 — I/O port D14 |
| פין 24 | RD15 — I/O port D15 |
| פין 25 | VSS — Digital ground |
| פין 26 | VDD — Digital positive supply (2.5V-5.5V) |
| פין 27 | RF0 — I/O port F0 |
| פין 28 | RF1 — I/O port F1 |
| פין 29 | RF2 — I/O port F2 |
| פין 30 | RF3 — I/O port F3 |
| פין 31 | RF4 — I/O port F4 / BTEDC |
| פין 32 | RF5 — I/O port F5 / BTEDA |
| פין 33 | RF6 — I/O port F6 |
| פין 34 | RF7 — I/O port F7 |
| פין 35 | RF8 — I/O port F8 |
| פין 36 | VSS — Digital ground |
| פין 37 | VDD — Digital positive supply (2.5V-5.5V) |
| פין 38 | RG0 — I/O port G0 |
| פין 39 | RG1 — I/O port G1 |
| פין 40 | RG2 — I/O port G2 |
| פין 41 | RG3 — I/O port G3 |
| פין 42 | RE0 — I/O port E0 |
| פין 43 | RE1 — I/O port E1 |
| פין 44 | RE2 — I/O port E2 |
| פין 45 | RE3 — I/O port E3 |
| פין 46 | RE4 — I/O port E4 |
| פין 47 | RE5 — I/O port E5 |
| פין 48 | RE6 — I/O port E6 |
| פין 49 | RE7 — I/O port E7 |
| פין 50 | VSS — Digital ground |
| פין 51 | VDD — Digital positive supply (2.5V-5.5V) |
| פין 52 | RA7 — I/O port A7 |
| פין 53 | RA8 — I/O port A8 |
| פין 54 | RA9 — I/O port A9 |
| פין 55 | RA10 — I/O port A10 |
| פין 56 | RA11 — I/O port A11 |
| פין 57 | RA12 — I/O port A12 |
| פין 58 | RA13 — I/O port A13 |
| פין 59 | RA14 — I/O port A14 |
| פין 60 | RA15 — I/O port A15 |
| פין 61 | VSS — Digital ground |
| פין 62 | VDD — Digital positive supply (2.5V-5.5V) |
| פין 63 | RC1 — I/O port C1 |
| פין 64 | RC2 — I/O port C2 |
יישומים טיפוסיים
DSPIC30F5011-20I/PT מתאים עבור 6 יישוםs: AC Induction Motor VFD Control, Digital PFC Power Supply, BLDC / PMSM Sensorless Control, Uninterruptible Power Supply (UPS) Controller, Industrial CAN Node Controller, Audio Effects / Digital Audio Mixer.
AC Induction Motor VFD Control
The DSPIC30F5011-20I/PT is a strong fit for three-phase AC induction motor Variable-Frequency Drives because its 20 MIPS DSP engine executes Park/Clarke transforms and Field-Oriented Control (FOC) loops within microseconds, and its 66 KB Flash accommodates the full state machine and PI regulator code. The 52 I/O pins drive six PWM channels, three-phase gate drivers, and digital isolators without external mux logic, while the 10-bit 500 ksps ADC samples shunt-resistor currents fast enough for sub-100 microsecond current loops. Place the DSC between the power stage and the HMI; in a 5 kW VFD it typically replaces both an MCU and a standalone DSP. Compared with an MCU-only solution it eliminates cycle stealing in the controller, leaving headroom for CANopen or Modbus stacks.
מומלץ
Digital PFC Power Supply
Power-Factor Correction (PFC) controllers in digital power supplies benefit from the DSPIC30F5011-20I/PT because the single-cycle MAC computes the average current-mode control law and harmonic compensation without CPU loading. The integrated 10-bit ADC synchronizes to the PWM module to sample inductor current at the switching node, and the 4 KB RAM holds lookup tables for the boost converter transfer function. In a 1 kW CCM PFC stage running at 100 kHz, the DSC leaves 30-40% MIPS headroom for housekeeping, brown-out handling and housekeeping telemetry. The CAN 2.0B peripheral enables real-time reporting of input power factor, RMS current, and fault states to a system controller.
מומלץ
BLDC / PMSM Sensorless Control
Sensorless Brushless DC and Permanent-Magnet Synchronous Motor (PMSM) drives use Back-EMF zero-crossing or sliding-mode observers, both of which are compute-intensive DSP tasks well suited to the DSPIC30F5011-20I/PT. Its 40 MHz clock and 17x17 MAC compute observer gains and Park transforms in under 1 microsecond per loop, supporting switching frequencies up to 25 kHz with adequate timing margin. The 66 KB Flash holds observer state tables and start-up routines, while CAN 2.0B reports speed, current and fault flags to a higher-level vehicle or factory controller. Industrial-grade operation to +85C supports under-hood and outdoor equipment enclosures without derating.
מומלץ
Uninterruptible Power Supply (UPS) Controller
Online and line-interactive UPS systems require simultaneous control of the rectifier, inverter and battery charger - a workload that maps naturally onto the DSPIC30F5011-20I/PT's multi-loop DSP architecture. The DSC executes three independent control loops (PFC, inverter sinusoidal PWM, battery charge profile) while the 2.5-5.5V VDD range tolerates 24V battery stacks after LDO regulation. The 52 I/O drive status LEDs, relays, EEPROM logging, and the CAN or RS-485 bus for SNMP-style monitoring. Compared with discrete analog controllers, this approach halves the BOM and enables field-upgradeable firmware via the UART bootloader.
מומלץ
Industrial CAN Node Controller
The DSPIC30F5011-20I/PT's integrated CAN 2.0B module, 52 I/O pins, and industrial temperature rating make it a strong fit for distributed CANopen and DeviceNet nodes such as sensor hubs, valve manifolds and conveyor controllers. The 66 KB Flash runs a CANopen stack (e.g., CANopenNode) with PDO/SDO handling, while the 4 KB RAM holds process data buffers. The two UARTs serve RS-485 Modbus gateways for legacy equipment, and the SPI bus drives external ADC or DAC peripherals. Pin compatibility with the DSPIC30F5013 and DSPIC30F4013 families lets designers scale Flash/RAM without re-laying the PCB.
מומלץ
Audio Effects / Digital Audio Mixer
Although often viewed as a motor-control DSC, the DSPIC30F5011-20I/PT also fits low-latency digital audio effects such as parametric EQ, reverb tails and feedback suppression where cost is paramount. Its 17x17 MAC and 40-bit accumulator implement biquad filters and comb delays in real time at 48 kHz sample rate, with the 4 KB RAM holding 100 ms of stereo delay-line memory. The two SPI interfaces drive external CODECs, and the I2C bus services front-panel encoders. For higher-fidelity or multi-channel audio, migrate to dsPIC33F; for budget karaoke and guitar-effect products, the 5011 hits the price/performance sweet spot.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור DSPIC30F5011-20I/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | DSPIC30F5011-30I/PT | DSPIC30F5013-20I/PT | DSPIC30F5011T-20I/PT | DSPIC30F4013-20I/PT | DSPIC30F5011-20I/PTG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10) | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same |
| Maximum CPU Speed | 20 MIPS (40 MHz) | 30 MIPS (60 MHz) | 20 MIPS (40 MHz) | 20 MIPS (40 MHz) | 20 MIPS (40 MHz) | 20 MIPS (40 MHz) |
| Program Flash | 66 KB | 66 KB | 66 KB | 66 KB | 48 KB | 66 KB |
| Data RAM | 4 KB | 4 KB | 8 KB | 4 KB | 4 KB | 4 KB |
| I/O Pins | 52 | 52 | 52 | 52 | 52 | 52 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Unit Price (qty 1) | USD 12.45 | USD 13.10 (approx) | USD 12.85 (approx) | USD 12.45 (approx) | USD 11.20 (approx) | USD 12.45 (approx) |
מבדילים עיקריים
- On-chip DSP engine with 17x17-bit single-cycle MAC at 20 MIPS (לעומתPIC24FJ64GA004 (16-bit MCU))
- Integrated CAN 2.0B module on-chip (לעומתdsPIC30F3014 (no CAN))
- 52 I/O pins with industrial -40C to +85C temperature (לעומתdsPIC33FJ64MC802 (28-pin))
- 66 KB Flash and 4 KB RAM with 5 timers (לעומתDSPIC30F4013-20I/PT (48 KB Flash))
הערות תכנון
Decouple each VDD/VSS pair (pins 16/15, 26/25, 37/36, 51/50, 62/61) with a 0.1 uF X7R ceramic placed within 3 mm of the pin pair. Add a bulk 10 uF tantalum or aluminum-polymer capacitor near the device to handle DSP MAC transients. Sequence AVDD before VDD if the analog section is powered independently, to avoid I/O pin latch-up. Estimated: a VDD noise spike above 50 mVpp during heavy DSP activity can corrupt ADC readings if decoupling is weak.
Route the analog signals (AN0-AN5) on a dedicated analog ground island tied to AVSS at a single point; keep digital return currents away from this island. Place the crystal within 8 mm of OSC1/OSC2 with short, symmetric traces and a grounded guard ring to suppress noise injection into the PLL. Estimated: stray capacitance above 5 pF on OSC1/OSC2 can shift the PLL lock range and cause intermittent start-up failures in production.
Configure the JTAG/debug pins (PGC/PGD) as outputs with the TRIS register cleared before entering sleep, otherwise floating inputs can draw several hundred microamps and discharge the supply. Always program the Configuration bits to enable the watchdog timer in motor-control and UPS applications - a single code hang without watchdog reset can destroy a three-phase inverter. Do not assume the DSPIC30F5011-20I/PT and DSPIC30F5013-20I/PT firmware is binary-compatible; the larger RAM map on the 5013 requires linker-script adjustments.
At the maximum ambient industrial temperature of 85C and 40 MHz operation, the TQFP-64 package (theta_JA approximately 45 C/W on a 4-layer JEDEC test board) dissipates roughly 0.6 W internally before additional I/O switching losses. Estimated: at full I/O switching on 52 pins into 50 pF loads, dynamic dissipation adds another 200-300 mW; budget a copper pour of at least 1 square inch under the exposed die pad area for reliable operation above 70C ambient.
מידע על תאימות
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (-40C to +85C) but not AEC-Q100 automotive qualified - contact Microchip for automotive-grade equivalents.
