DSPIC33CK256MP506-I/MR - 100MHz 16-bit DSC 256KB Flash | Microchip
MPN: DSPIC33CK256MP506-I/MR ✓ פעילDSPIC33CK256MP506-I/MR סקירה
A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor (DSP). Within the power-management hierarchy, the dsPIC33CK family sits at the top of Microchip's 16-bit DSC line-up, positioning a single-core 100 MIPS engine (dsPIC33CK) below the dual-core dsPIC33CH family, and above the dsPIC33EP generation. DSCs are the standard choice for closed-loop, cycle-by-cycle control loops in switch-mode power conversion and motor drive systems.
Key differentiating features include a single-cycle 16x16 MAC DSP engine, 250 MSPS 12-bit ADC with up to 4.1 Msps throughput, three analog comparators, three internal op amps, and 45.5 ps resolution PWM peripherals for precision digital power topologies such as LLC, totem-pole PFC and phase-shifted full bridge.
The device also integrates a PTG (Peripheral Trigger Generator), multiple UART, SPI and I2C ports, and CAN Flexible Data-rate (CAN FD) for industrial and automotive-adjacent networking. Euler and flash ECC support, plus hardware loop construction, simplify deterministic control code.
Typical applications include PFC and DC-DC digital power supplies, BLDC/PMSM/ACIM/SR motor control, solar inverters, wireless charging, UPS systems and advanced sensing nodes where 100 MHz single-cycle control-loop execution and CAN FD connectivity are required.
Design consideration: all VDD/VSS pairs must be decoupled with 0.1 uF ceramics placed directly at the pins, and the VCAP pin requires its specified capacitor for internal regulator stability; use one PGECx/PGEDx pair consistently for ICSP programming.
This page synthesizes distributor pricing, drop-in same-footprint alternatives from the dsPIC33CK MP506 family, and practical design notes not found in the manufacturer datasheet, verified against DigiKey, Mouser and LCSC listings as of 2026-09-23.
חלופות תחליף ישיר עבור DSPIC33CK256MP506-I/MR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם DSPIC33CK256MP506-I/MR (אותו גורם צורה וטביעת רגל) — שונים ב Core, Package, Operating Temperature, PWM, Program Flash.
DSPIC33CK256MP506-E/MR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC33CK128MP506-E/MR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC33CK128MP506-I/MR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC33CK64MP506-I/MR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC33CK32MP506-I/MR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←DSPIC33CK256MP506-I/MR דירוגים מרביים ומאפיינים חשמליים
| Core | 16-bit dsPIC DSC |
| Core Speed | 100 MHz (100 MIPS) |
| Program Memory (Flash) | 256 KB |
| RAM | 24 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| מארז | 64-QFN (9x9 mm), MR suffix |
| ADC Resolution | 12-bit |
| CAN Interface | CAN FD |
| On-chip Op Amps | 3 |
| Analog Comparators | 3 |
| PWM | High-Resolution PWM (45.5 ps) |
| טמפרטורת פעולה | -40C to +85C (I grade) |
| סוג הרכבה | Surface Mount |
| Communication Interfaces | UART, SPI, I2C, CAN FD |
| Special Peripherals | PTG, DSP engine, 250 MSPS ADC |
| סטטוס RoHS | Compliant |
תצורת פינים של DSPIC33CK256MP506-I/MR
| פין 1 | MCLR — Master clear reset (external reset input, ICSP) |
| פין 2 | AN0/C1IN1+/RP16 — Analog input 0 / comparator input / remappable IO (verify against datasheet) |
| פין 3 | AN1/C1IN1-/RP17 — Analog input 1 / comparator input / remappable IO (verify against datasheet) |
| פין 4 | PGED1/AN2/RP18 — ICSP data 1 / analog input / remappable IO |
| פין 5 | PGEC1/AN3/RP19 — ICSP clock 1 / analog input / remappable IO |
| פין 6 | AN4/RP20 — Analog input 4 / remappable IO |
| פין 7 | VDD — Positive supply (3.0-3.6 V) |
| פין 8 | VSS — Ground reference |
| פין 9 | OSC1/CLKI/RP21 — Crystal input / external clock input / remappable IO |
| פין 10 | OSC2/CLKO/RP22 — Crystal output / clock output / remappable IO |
| פין 11 | RP23 — Remappable IO |
| פין 12 | RP24 — Remappable IO |
| פין 13 | RP25 — Remappable IO |
| פין 14 | VSS — Ground reference |
| פין 15 | VDD — Positive supply |
| פין 16 | RP26 — Remappable IO |
| פין 17 | RP27 — Remappable IO |
| פין 18 | RP28 — Remappable IO |
| פין 19 | PGED2/RP29 — ICSP data 2 / remappable IO |
| פין 20 | PGEC2/RP30 — ICSP clock 2 / remappable IO |
| פין 21 | RP31 — Remappable IO |
| פין 22 | RP32 — Remappable IO |
| פין 23 | RP33 — Remappable IO |
| פין 24 | RP34 — Remappable IO |
| פין 25 | VSS — Ground reference |
| פין 26 | VDD — Positive supply |
| פין 27 | AN5/RP35 — Analog input / remappable IO |
| פין 28 | AN6/RP36 — Analog input / remappable IO |
| פין 29 | AN7/RP37 — Analog input / remappable IO |
| פין 30 | AN8/RP38 — Analog input / remappable IO |
| פין 31 | AN9/RP39 — Analog input / remappable IO |
| פין 32 | VSS — Ground reference |
| פין 33 | AN10/RP40 — Analog input / remappable IO |
| פין 34 | AN11/RP41 — Analog input / remappable IO |
| פין 35 | AN12/RP42 — Analog input / remappable IO |
| פין 36 | AN13/RP43 — Analog input / remappable IO |
| פין 37 | AN14/RP44 — Analog input / remappable IO |
| פין 38 | VDD — Positive supply |
| פין 39 | VSS — Ground reference |
| פין 40 | AN15/RP45 — Analog input / remappable IO |
| פין 41 | RP46 — Remappable IO |
| פין 42 | RP47 — Remappable IO |
| פין 43 | RP48 — Remappable IO |
| פין 44 | RP49 — Remappable IO |
| פין 45 | RP50 — Remappable IO |
| פין 46 | RP51 — Remappable IO |
| פין 47 | AVDD — Analog positive supply |
| פין 48 | AVSS — Analog ground |
| פין 49 | VREF+/RP52 — ADC positive voltage reference / remappable IO |
| פין 50 | VREF-/RP53 — ADC negative voltage reference / remappable IO |
| פין 51 | RP54 — Remappable IO |
| פין 52 | RP55 — Remappable IO |
| פין 53 | RP56 — Remappable IO |
| פין 54 | RP57 — Remappable IO |
| פין 55 | PGED3/RP58 — ICSP data 3 / remappable IO |
| פין 56 | PGEC3/RP59 — ICSP clock 3 / remappable IO |
| פין 57 | RP60 — Remappable IO |
| פין 58 | RP61 — Remappable IO |
| פין 59 | RP62 — Remappable IO |
| פין 60 | RP63 — Remappable IO |
| פין 61 | VCAP — Internal core regulator capacitor (connect specified capacitor to VSS) |
| פין 62 | RP64 — Remappable IO |
| פין 63 | RP65 — Remappable IO |
| פין 64 | RP85/VDD — Remappable IO / positive supply (verify exact muxing against datasheet) |
יישומים טיפוסיים
DSPIC33CK256MP506-I/MR מתאים עבור 6 יישוםs: Digital Power Supplies (PFC / DC-DC / LLC), BLDC / PMSM Motor Control (FOC), Solar Inverters and Energy Conversion, Uninterruptible Power Supplies (UPS), Advanced Sensing and Control Nodes, Wireless Charging and Wireless Power Transfer.
Digital Power Supplies (PFC / DC-DC / LLC)
The DSPIC33CK256MP506-I/MR fits switch-mode power conversion because its 100 MHz core executes proportional-integral control loops at switching frequency while the 45.5 ps high-resolution PWM eliminates limit-cycle oscillation in LLC and phase-shifted full-bridge converters. The 12-bit ADC can sample input/output current and voltage every switching cycle, and the PTG (Peripheral Trigger Generator) sequences ADC conversions tied to PWM events without CPU intervention, freeing MIPS for control math. Three hardware comparators provide cycle-by-cycle overcurrent protection with latency far below any software interrupt path. Placed as the sole controller between the power stage and housekeeping circuitry, it replaces analog control chips with a programmable, firmware-upgradeable solution; the trade-off is higher idle power than a fixed-frequency analog controller and mandatory firmware validation for safety-critical rails.
מומלץ
BLDC / PMSM Motor Control (FOC)
Field-oriented control of permanent-magnet motors is compute-intensive: Clarke/Park transforms and PI loops must complete within one PWM period. The DSPIC33CK256MP506-I/MR's 100 MHz core with a single-cycle 16x16 MAC DSP engine executes FOC at 20-100 kHz PWM rates with headroom. Per Microchip's family description, the dsPIC33CK family enables BLDC, PMSM, ACIM, SR and stepper control that is more energy efficient, quieter and extends motor life. The three on-chip op amps amplify low-level shunt-current signals directly, reducing BOM cost versus external amplifiers, and the 12-bit ADC simultaneously samples phase currents at the PWM center for torque-ripple-free control. Designers should budget the three PWM channels for a three-phase inverter gate-drive interface, with dead-time managed in hardware.
מומלץ
Solar Inverters and Energy Conversion
Grid-tied and off-grid solar converters require simultaneous MPPT, inverter modulation, grid synchronization and safety monitoring. The DSPIC33CK256MP506-I/MR's 100 MIPS core handles MPPT algorithms while dedicated PWM hardware generates the high-resolution modulated gate signals needed to keep THD low at high switching frequencies. The 12-bit ADC multiplexes across DC-link voltage, panel current, grid voltage and temperature channels each control cycle; three comparators implement fast hardware trip zones for grid faults and overcurrent. CAN FD connectivity supports inverter-to-BMS or string-level networking. Unlike dual-core alternatives, the entire budget is available to one deterministic control loop, simplifying certification analysis; the trade-off is that HMI/display work must be lightweight or delegated to an external MCU.
מומלץ
Uninterruptible Power Supplies (UPS)
UPS systems combine battery charging, DC-AC inversion and transfer-switch logic in one control domain. The DSPIC33CK256MP506-I/MR covers this with its 100 MHz core running the inverter control loop, high-resolution PWM shaping the output sinusoid to minimize output-filter stress, and the 12-bit ADC continuously monitoring battery voltage, current and AC line zero crossings. Hardware comparators guard the battery and inverter stages against overcurrent, while multiple UART/SPI/I2C ports report status to front-panel and network supervisory circuits. CAN FD enables rack-level UPS communication in data-center deployments. Because the I temperature grade spans -40C to +85C, it suits industrial cabinet installations; designers must ensure the firmware watchdog and brown-out reset are enabled for ride-through robustness.
מומלץ
Advanced Sensing and Control Nodes
Industrial sensing nodes benefit from the DSC's ability to run signal-processing on raw sensor data locally. The DSPIC33CK256MP506-I/MR's DSP engine applies FIR/IIR filtering or FFT analysis to ADC streams sampled at up to hundreds of ksps, while the PTG schedules autonomous acquisition sequences with microsecond determinism. On-chip op amps condition small analog signals, and the CAN FD interface streams processed results over robust industrial networks. Typical deployments include vibration monitoring on rotating machinery, precision flow or pressure measurement where filtering must be cycle-accurate, and condition-based maintenance gateways. Using the 256 KB flash, calibration tables and DSP coefficient sets coexist with application code; the 24 KB RAM accommodates multiple filter buffers without external memory.
מומלץ
Wireless Charging and Wireless Power Transfer
Wireless power transmitters require precise control of a resonant half- or full-bridge at 100 kHz-2 MHz operating points with fast foreign-object and over-temperature protection. The DSPIC33CK256MP506-I/MR's 45.5 ps PWM resolution allows fine frequency and phase tuning to track resonance and maximize coil-to-coil efficiency as coupling varies, while its 100 MHz core implements QI/EPP-class communication demodulation from the power signal. The 12-bit ADC samples coil current and rectifier voltage each cycle for closed-loop power regulation, and hardware comparators implement sub-microsecond fault trips demanded by safety standards. Placing this DSC as the transmitter controller reduces solution size by integrating sensing amplification on-chip; high-frequency designs must verify PWM dead-time resolution against the target resonant frequency.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור DSPIC33CK256MP506-I/MR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | DSPIC33CK256MP506-E/MR | DSPIC33CK128MP506-E/MR | DSPIC33CK128MP506-I/MR | DSPIC33CK64MP506-I/MR |
|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 100 MHz (100 MIPS) | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 256 KB | 256 KB | 128 KB | 128 KB | 64 KB |
| RAM | 24 KB | 24 KB | 24 KB | 24 KB | 24 KB |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| CAN FD | Yes | Yes | Yes | Yes | Yes |
| On-chip Op Amps / Comparators | 3 / 3 | 3 / 3 | 3 / 3 | 3 / 3 | 3 / 3 |
מבדילים עיקריים
- Full 100 MHz single-core performance for control loops (לעומתDSPIC33CH256MP506T-I/PT)
- Extended-temperature drop-in variant available (לעומתDSPIC33CK256MP506-E/MR)
- Flash-size scalability on one footprint (לעומתDSPIC33CK128MP506-I/MR)
הערות תכנון
The DSPIC33CK256MP506-I/MR requires 3.0-3.6 V on every VDD pin plus a separate AVDD rail for the analog domain. Fit a 0.1 uF ceramic directly at each VDD/VSS pair and at least 4.7 uF bulk capacitance near the device. The VCAP pin needs its datasheet-specified capacitor (about 10 uF) to ground for the internal 1.8 V core LDO - omitting it or using the wrong value causes unstable operation or failure to boot. Route AVDD through an RC or ferrite filter from VDD to keep ADC noise low.
For digital power and motor-control layouts, keep the PWM gate-drive traces short and pair each PGECx/PGEDx ICSP pair consistently (PGEC2 must pair with PGED2, etc.) and bring the chosen pair to a programming header. Place analog sense inputs (ANx pins) away from PWM switching nodes on the copper, and use the QFN center exposed pad as a solid VSS connection with multiple thermal vias to the ground plane to reduce ground bounce during simultaneous PWM switching.
Common issues: (1) forgetting that this is a 3.3 V-only device - 5 V logic connections must respect pin 5 V-tolerant ratings in the datasheet; (2) using mismatched PGEC/PGED pairs during ICSP, which fails programming silently; (3) disabling the watchdog while debugging then shipping firmware without re-enabling it; (4) assuming dual-core dsPIC33CH code ports directly - the dsPIC33CK is single core, so slave-core routines must be merged. Verify flash size headroom before switching to 128/64 KB drop-in variants.
With 45.5 ps PWM edge resolution, firmware-configured dead-time and slew can be tuned to reduce EMI, but very fast edges also increase radiated emissions. Use the PWM slew-rate features conservatively, add small gate resistors on driver outputs, and keep the high-resolution PWM clock configuration within datasheet limits. CISPR-style pre-compliance testing is recommended early because PWM-edge tuning interacts with PCB parasitics in ways simulation may not predict.
מידע על תאימות
RoHS compliant per standard Microchip MR package suffix for the dsPIC33CK family; REACH/halogen declarations available from Microchip product page environmental documents.
