Silicon Labs

EFM32TG822F32-QFP48T - 32MHz Low-Power MCU | Silicon Labs

MPN: EFM32TG822F32-QFP48T ✓ פעיל
1.85 V to 3.8 V Vdss 0.6 uA minimum Id 48-TQFP, 7 x 7 mm Package 32 MHz Speed 32 kB Memory
כמות הזמנה מינימלית: 1 |

EFM32TG822F32-QFP48T סקירה

The Silicon Labs EFM32TG822F32-QFP48T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins in a 48-TQFP 7 x 7 mm package. It combines a low-power architecture with fast wake-up operation, energy-saving modes, and autonomous peripheral functions for battery-powered and energy-conscious embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals on one device. The EFM32TG Tiny Gecko family belongs to the 32-bit microcontroller category and combines an industrial-standard ARM Cortex-M3 core with Silicon Labs energy-management hardware. Its autonomous peripherals can perform timing, sensing, and data-movement tasks while the processor sleeps, reducing active processing time and overall energy consumption.

The device provides 32 kB Flash for firmware, 4 kB SRAM for working data, and 37 configurable digital I/O pins. Its peripheral set includes two 16-bit timers, AES hardware, three operational amplifiers, and support for an 8 x 11 LCD. The manufacturer datasheet states that EFM32TG devices can operate with run-mode consumption as low as 150 uA/MHz and stop-mode current as low as 0.6 uA, making the part suitable for portable instruments and long-life sensor nodes.

The Cortex-M3 processor provides a 32-bit instruction set with efficient exception handling and deterministic interrupt response. EFM32TG peripherals can continue selected measurements or events without continuous CPU intervention, while the system can wake rapidly from low-energy states. The family reference manual identifies a wake-up time as short as 2 us, supporting applications that must respond quickly without retaining the processor in continuous run mode.

Typical uses include low-power sensor nodes, battery-powered medical accessories, compact industrial monitors, LCD-driven handheld equipment, security and access controls, and energy-harvesting products. The three operational amplifiers can support analog signal conditioning, while AES hardware can accelerate encrypted data handling. These integrated resources reduce the need for separate analog and security ICs in space-constrained designs.

PCB design should preserve the manufacturer’s recommended decoupling and exposed-land pattern for the 48-TQFP package. Keep oscillator, bypass-capacitor, and sensitive analog traces short, and use a stable supply source appropriate for the 1.85 V to 3.8 V operating range. Firmware should use the energy-mode and peripheral-autonomy features deliberately rather than relying only on a low clock frequency.

This page combines the core device characteristics, package details, verified cross-reference information, and practical design guidance for engineers evaluating the EFM32TG822F32-QFP48T. The comparison and application sections also clarify how flash, RAM, analog resources, security hardware, and low-power behavior affect design choices in compact embedded systems.

חלופות תחליף ישיר עבור EFM32TG822F32-QFP48T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם EFM32TG822F32-QFP48T (אותו גורם צורה וטביעת רגל) — שונים ב Package, Flash Memory, Product Type, Stop Mode Current, Architecture.

Silicon Labs
Package: 48-pin TQFP, 7 mm × 7 mm
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP, 7 mm × 7 mm
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Flash Memory: 8 KB
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP (7 mm x 7 mm)
Flash Memory: 16 kB
Product Type: ARM Cortex-M3 32-bit Microcontroller
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP (7 mm x 7 mm)
Stop Mode Current: 0.6 µA
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP, 7 x 7 mm
Product Type: ARM Cortex-M3 Microcontroller
Architecture: 32-bit
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP, 7 mm x 7 mm
Stop Mode Current: 0.6 µA minimum
השווה עם EFM32TG822F32-QFP48T →
Silicon Labs
Package: 48-pin TQFP, 7 mm x 7 mm
Stop Mode Current: 0.6 µA minimum
השווה עם EFM32TG822F32-QFP48T →
Silicon Laboratories
Package: 48-TQFP (7 x 7 mm)
Flash Memory: 8 KB (8K x 8)
Architecture: 32-bit single-core
השווה עם EFM32TG822F32-QFP48T →

EFM32TG822F32-D-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7x7)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 32 KB · 4 KB · 37 pins

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

EFM32TG222F32-D-QFP48

✅ Drop-In ⚠️ מפרטים לא מאומתים
Silicon Labs
📦 48-TQFP (7x7)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · 32 kB · 4 kB · 37 pins · 2 × 16-bit timers · 1.98 V to 3.8 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

EFM32TG822F32-QFP48T דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB
RAM 4 kB
Digital I/O Pins 37 pins
Timer Count 2 x 16-bit timers
Supply Voltage Range 1.85 V to 3.8 V
Stop Mode Current 0.6 uA minimum
Run Mode Current 150 uA/MHz
Wake-Up Time 2 us
Processor Core ARM Cortex-M3
Architecture ARM 32-bit RISC
AES Hardware Accelerator Present
Operational Amplifier Count 3 amplifiers
LCD Support 8 x 11 LCD
מארז 48-TQFP, 7 x 7 mm
Total Package Pins 48 pins
סוג הרכבה Surface mount

מדריך תצורת פינים של EFM32TG822F32-QFP48T 48 pins

תצורת פינים עבור EFM32TG822F32-QFP48T (מארזת 48 pins). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 48 pins עבור EFM32TG822F32-QFP48T

אין נתוני פריסת פינים מפורטים עבור EFM32TG822F32-QFP48T.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

EFM32TG822F32-QFP48T מתאים עבור 6 יישוםs: Battery-Powered Sensor Nodes, Portable Medical Accessories, Industrial Monitoring and Control, Secure Access and Security Equipment, Battery-Powered Data Acquisition, LCD-Equipped Handheld Instruments.

🧩

Battery-Powered Sensor Nodes

The EFM32TG822F32-QFP48T fits battery-powered sensor nodes because it combines a 32 MHz ARM Cortex-M3 processor with stop-mode current as low as 0.6 uA and run-mode consumption as low as 150 uA/MHz. Its autonomous peripherals can continue timekeeping or event handling while the CPU remains in a low-energy state, reducing the time spent actively processing each measurement. The 4 kB RAM supports short-term data buffering, while 32 kB Flash accommodates firmware, calibration tables, and configuration data. Design the system around periodic wake events, local sensor sampling, and batched radio transmissions to obtain the greatest benefit from the device’s energy-management hardware.

💊

Portable Medical Accessories

The EFM32TG822F32-QFP48T is suitable for portable medical accessories that combine sensor conditioning, local processing, and a compact display. Its three integrated operational amplifiers can condition low-level analog inputs without requiring three separate amplifier packages, while the 8 x 11 LCD capability supports direct status and measurement displays. AES hardware provides a hardware path for protecting stored or transmitted data, and the low-power modes help manage battery consumption between clinical readings. The 48-TQFP 7 x 7 mm package leaves board area for sensors, isolation components, and a battery. Final medical designs still require application-specific risk analysis, electrical validation, and confirmation of all regulatory obligations.

🏭

Industrial Monitoring and Control

The EFM32TG822F32-QFP48T fits compact industrial monitors that must combine control logic, timed inputs, and low-power operation. Two 16-bit timers support periodic measurement, motor or actuator timing, and debounce functions, while the 37 digital I/O pins provide interface capacity for sensors, discrete indicators, and field-bus transceiver connections. The 32 MHz Cortex-M3 core can execute control algorithms without a separate processor, and the 1.85 V to 3.8 V supply range supports low-voltage system architectures. Use the manufacturer reference manual to allocate timer channels and alternate-function pins, and validate the complete design across temperature, supply tolerance, and industrial transient conditions expected by the installation.

🔒

Secure Access and Security Equipment

The EFM32TG822F32-QFP48T is appropriate for access-control peripherals, security modules, and compact lock controllers where fast response and encrypted data handling are valuable. Its hardware AES accelerator offloads encryption and decryption tasks from the Cortex-M3 processor, helping reduce software processing time during authenticated communication. Thirty-seven digital I/O pins can support keypad scanning, contact monitoring, status LEDs, or an external secure element interface, while two 16-bit timers can coordinate timing-sensitive actuator outputs. The low-power architecture is also useful for battery-backed locks that must remain responsive without continuously running the processor. A production design should still include secure boot practices, protected key storage, tamper response, and update mechanisms appropriate to the threat model.

📟

Battery-Powered Data Acquisition

The EFM32TG822F32-QFP48T supports compact, battery-powered data-acquisition systems that need local computation without a high-power processor. The three operational amplifiers can provide gain, buffering, or filtering for sensor inputs, while the 32 MHz Cortex-M3 core performs calibration, filtering, and data formatting. The 4 kB RAM is suitable for short acquisition buffers, and 32 kB Flash can retain the control firmware and compact lookup tables. Autonomous timers and comparators allow the MCU to monitor thresholds and wake only when a meaningful event occurs, reducing unnecessary radio activity. Select the input bandwidth, ADC strategy, and sampling rate together so that analog conditioning, memory limits, and the duty-cycled power budget meet the measurement specification.

📺

LCD-Equipped Handheld Instruments

The EFM32TG822F32-QFP48T fits handheld instruments that combine an LCD, operator controls, and battery-powered operation. Its integrated support for an 8 x 11 LCD reduces the need for a separate display controller, while 37 digital I/O pins leave capacity for buttons, indicators, and measurement peripherals. The 32 MHz ARM Cortex-M3 core can perform local calculations, and AES hardware can accelerate protected data exchanges. Low-power operation is particularly valuable in instruments that remain in the user’s hand for long periods: the processor can enter sleep or stop modes between interactions and wake rapidly when a control is pressed. Validate the LCD interface timing, panel voltage, glass temperature behavior, and power sequence against the chosen display module.

What is the EFM32TG822F32-QFP48T?
The EFM32TG822F32-QFP48T is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash, 4 kB of RAM, and 37 digital I/O pins. According to the Silicon Labs EFM32TG datasheet, the device belongs to the Tiny Gecko family and integrates low-energy modes, autonomous peripherals, analog resources, and security hardware in a 48-TQFP 7 x 7 mm package.
What are the key specifications of EFM32TG822F32-QFP48T that engineers should know?
The EFM32TG822F32-QFP48T combines a 32 MHz ARM Cortex-M3 core with 32 kB Flash, 4 kB RAM, and 37 digital I/O pins in a 48-TQFP package. According to the Silicon Labs EFM32TG datasheet, it also provides two 16-bit timers, AES hardware, three operational amplifiers, 8 x 11 LCD support, and a 1.85 V to 3.8 V supply range. Stop-mode current can reach 0.6 uA.
What is the operating voltage of EFM32TG822F32-QFP48T?
The EFM32TG822F32-QFP48T operates from 1.85 V to 3.8 V, supporting low-voltage designs with tightly controlled power budgets. According to the Silicon Labs EFM32TG datasheet, this range covers the device’s low-power architecture and allows external rail scaling for energy-harvesting, portable sensing, and embedded instrument applications. Confirm the exact operating mode and peripheral configuration before finalizing the power tree.
Where can I download the EFM32TG822F32-QFP48T datasheet PDF?
The EFM32TG822F32-QFP48T datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. The manufacturer document covers the EFM32TG family, including the 32 MHz processor, memory resources, low-energy behavior, peripherals, electrical characteristics, and package information. Use the family reference manual for detailed peripheral registers and system behavior.
Where can I find the EFM32TG822F32-QFP48T pinout?
The EFM32TG822F32-QFP48T pin assignments are shown in the Silicon Labs EFM32TG datasheet under the 48-TQFP package information. The device has 48 package pins and uses the TQFP-48 7 x 7 mm footprint. Before routing a board, assign every power, ground, reset, debug, clock, and GPIO signal directly from the manufacturer pin-description table and preserve the documented exposed thermal and land requirements.
Is the EFM32TG822F32-QFP48T suitable for battery-powered applications?
Yes, the EFM32TG822F32-QFP48T is suitable for battery-powered applications because its EFM32TG architecture combines low-power operation with autonomous peripherals. According to the Silicon Labs EFM32TG datasheet, stop-mode current can be as low as 0.6 uA, run-mode current can be 150 uA/MHz, and wake-up time can be as short as 2 us. These characteristics support duty-cycled sensing and portable products.
What is the difference between EFM32TG822F32-QFP48T and EFM32TG822F32-QFP48?
The EFM32TG822F32-QFP48T and EFM32TG822F32-QFP48 are primarily distinguished by their orderable packing code. The T suffix identifies the tray-packed configuration, while the base part represents the corresponding ordering form. According to distributor records, both use the 48-TQFP 7 x 7 mm package and describe the same 32 MHz Cortex-M3 MCU with 32 kB Flash and 4 kB RAM.
What is the best drop-in replacement for EFM32TG822F32-QFP48T?
The closest identified drop-in choice is EFM32TG822F32-D-QFP48, which retains the 48-TQFP 7 x 7 mm package and the 32 MHz Cortex-M3 platform with 32 kB Flash and 4 kB RAM. The ordering suffix indicates a different device qualification or temperature treatment, so verify its electrical limits before substitution. Cross-brand replacements cannot be treated as drop-in without a complete pin and peripheral review.
Can EFM32TG822F32-D-QFP48 replace EFM32TG822F32-QFP48T?
The EFM32TG822F32-D-QFP48 can be considered as a same-package alternative after checking its qualification and temperature details. It shares the EFM32TG822F32 48-TQFP 7 x 7 mm format, 32 MHz Cortex-M3 core, 32 kB Flash, and 4 kB RAM. The distinction is the ordering suffix, so use the manufacturer datasheet and device labeling requirements to confirm that its temperature range and qualification match the application.
What can replace EFM32TG822F32-QFP48T?
EFM32TG822F32-D-QFP48 is the most direct identified replacement because it retains the same 48-TQFP footprint, 32 MHz Cortex-M3 core, 32 kB Flash, and 4 kB RAM. The exact suffix and qualification must still be checked before production use. Pin compatibility, supply range, temperature rating, peripheral availability, and firmware-device identification are the critical acceptance criteria.
Is EFM32TG822F32-QFP48T the same as EFM32TG822F32-QFP48?
The EFM32TG822F32-QFP48T and EFM32TG822F32-QFP48 have the same core technical identity but different orderable packing codes. Distributor records identify both as 32-bit, 32 MHz Cortex-M3 Tiny Gecko MCUs with 32 kB Flash in a 48-TQFP 7 x 7 mm package. The T suffix identifies the tray-packed version, so confirm the required reel or tray format rather than treating the suffixes as an electrical distinction.
EFM32TG822F32-QFP48T vs EFM32TG822F32-D-QFP48: which is better?
The EFM32TG822F32-QFP48T is preferable when its exact qualification and temperature range satisfy the product requirements and tray packing is acceptable. The EFM32TG822F32-D-QFP48 uses the same 48-TQFP package and retains 32 MHz operation, 32 kB Flash, and 4 kB RAM, but its suffix represents a distinct ordering condition. Select the part whose qualification, temperature grade, and packing form match the production design.
When should I choose EFM32TG822F32-QFP48T over EFM32TG822F32-D-QFP48?
Choose the EFM32TG822F32-QFP48T when the production BOM specifically requires the T ordering code, the tray-packed configuration, and the exact qualification associated with that suffix. Choose EFM32TG822F32-D-QFP48 only after reviewing the manufacturer specifications for temperature, qualification, and ordering differences. Both parts use the same 48-TQFP footprint, so the decisive issue is device-specific requirements rather than mechanical interchangeability alone.
Where can I buy EFM32TG822F32-QFP48T online?
Use the Request a Quote form on this page to request EFM32TG822F32-QFP48T availability, order quantities, and current lead time. The request can include the required 48-TQFP 7 x 7 mm tray configuration and your target quantity. Silabs-compatible production programs should also confirm lot traceability, date codes, and delivery conditions before placing a firm order.
What is the price of EFM32TG822F32-QFP48T?
Current commercial pricing for the EFM32TG822F32-QFP48T is not stated as a static value on this page. Submit the Request a Quote form with your required quantity, packaging preference, and delivery location to obtain a current quotation. The quotation process also allows confirmation of supported order increments, lifecycle supply, and lead time for the exact tray-packed MPN.
What is the lead time for EFM32TG822F32-QFP48T?
The current lead time for EFM32TG822F32-QFP48T should be confirmed through the Request a Quote form on this page. Include the required order quantity and delivery schedule so the supplier can return an accurate production commitment. For safety-critical or long-life equipment, request dated lot information and adequate schedule margin rather than relying on a generic stock estimate.
Is EFM32TG822F32-QFP48T in stock?
Current EFM32TG822F32-QFP48T inventory is confirmed through the Request a Quote form on this page. State the quantity, approved manufacturer list, date-code requirement, and destination when requesting availability. A firm production response should distinguish immediately available material from scheduled factory supply and identify the exact 48-TQFP tray-packed ordering code.

נתוני עזר הנדסיים עבור EFM32TG822F32-QFP48T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the EFM32TG822F32-QFP48T when a design needs a 32 MHz Cortex-M3 MCU with 32 kB Flash, 4 kB RAM, 37 digital I/O pins, three operational amplifiers, AES hardware, LCD support, and aggressive low-power operation. It is particularly appropriate for battery-powered sensing, compact data acquisition, handheld instruments, and secure access products where board area and standby current are important. EFM32TG822F32-D-QFP48 is the closest identified alternative because it preserves the same package, processor, Flash, and RAM, but its ordering suffix must be checked for qualification and temperature requirements. EFM32TG222F32-D-QFP48 may suit designs that retain the 48-TQFP footprint and 32 kB Flash, but peripheral mapping and device-specific features require full validation. Neither alternative should be approved solely by package outline; confirm pin multiplexing, analog resources, security hardware, firmware support, and production ordering constraints.

השוואה עם חלופות

פרמטר מוצר זה EFM32TG822F32-D-QFP48 EFM32TG222F32-D-QFP48
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
Brand Silicon Labs Silicon Labs Silicon Labs
Flash Memory 32 kB 32 kB 32 kB

מבדילים עיקריים

  • Integrated analog and security resources (לעומתEFM32TG222F32-D-QFP48)
  • Closest identified ordering alternative (לעומתEFM32TG822F32-D-QFP48)
  • Low-power integration (לעומתEFM32TG822F32-D-QFP48)

הערות תכנון

Build the firmware power policy around the EFM32TG energy modes rather than treating the 32 MHz maximum clock as a continuous operating point. Run the core only while processing an event, use autonomous peripherals for repetitive timing or comparison functions, and place the device in the deepest suitable state between events. Confirm the measured sleep current of every peripheral because LCD, analog, and communication blocks can materially change the system-level idle current.

Follow the manufacturer 48-TQFP footprint and land-pattern guidance exactly, including exposed thermal-land treatment where specified. Place the required input and bulk bypass capacitors adjacent to their assigned supply pins, and keep high-current return paths short. Separate noisy digital return current from the three operational amplifiers and any precision sensor inputs to reduce shared-impedance noise. Confirm all pin assignments in the package drawing before releasing artwork.

The integrated operational amplifiers and LCD interface make analog and display routing important on a compact mixed-signal board. Keep oscillator and sensitive analog traces short, avoid routing them beneath switching supplies or high-current LED paths, and provide a quiet ground reference for analog return currents. Use the datasheet's application-circuit examples to establish decoupling values and component placement rather than copying only the nominal schematic without its layout assumptions.

Do not substitute the MCU solely because two devices use a 48-TQFP outline. Verify the exact device identifier, Flash and RAM capacity, pin multiplexing, analog resources, LCD interface, AES availability, supply range, temperature grade, and qualification suffix. Software images must also match the selected device and its peripheral configuration. The EFM32TG822F32-D-QFP48 is the closest identified ordering alternative, but its suffix-specific requirements still require manufacturer review.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit compliance declarations were identified in the manufacturer and distributor information. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status against the exact orderable MPN before production release.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

EFM32TG822F32-QFP48T datasheet EFM32TG822F32-QFP48T pinout EFM32TG822F32-QFP48T specifications EFM32TG822F32-QFP48T equivalent EFM32TG822F32-QFP48T replacement EFM32TG822F32-QFP48T price EFM32TG822F32-QFP48T stock efm32tg822f32 d qfp48 EFM32TG822F32 48-TQFP footprint EFM32TG822F32 low power application EFM32TG822F32-QFP48T vs EFM32TG822F32-D-QFP48 Silicon Labs EFM32TG822F32-QFP48T

רכיבים ומונחים קשורים

Silicon Labs EFM32TG822F32-QFP48T EFM32TG822F32-D-QFP48 EFM32TG222F32-D-QFP48 EFM32TG Tiny Gecko ARM Cortex-M3 32-bit microcontroller embedded microcontroller energy-saving modes autonomous peripherals 32 kB Flash 4 kB RAM 37 digital I/O pins 16-bit timer AES hardware accelerator operational amplifier 8 x 11 LCD 48-TQFP TQFP family surface mount battery-powered sensor node industrial monitoring portable medical accessory low-power embedded system
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר