EFM32TG842F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG842F32-QFP64 ✓ פעילEFM32TG842F32-QFP64 סקירה
A microcontroller is a programmable system-on-chip that combines a processor core, memory, and peripherals such as timers, analog interfaces, communications controllers, and interrupt logic. The EFM32TG842F32-QFP64 belongs to the EFM32 Tiny Gecko family, a low-power 32-bit MCU platform built around the ARM Cortex-M3 architecture. This hierarchy places it within embedded processors, microcontrollers, and energy-efficient IoT control devices.
Key features include a 32 MHz Cortex-M3 core, 32 KB of Flash, 4 KB of RAM, 53 digital I/O pins, two 16-bit timers, a 12-bit ADC, LCD support, and AES hardware security. The EFM32 low-power platform provides autonomous peripheral operation, energy-saving modes, and fast wake-up times that help reduce the time the processor remains active.
The EFM32TG842F32-QFP64 combines a conventional RISC processor with highly integrated analog and timing resources. Its AES accelerator supports secure firmware and communication tasks, while its LCD and analog peripherals reduce the need for external components in compact control panels. According to the family datasheet, the platform consumes as little as 0.6 µA in Stop mode and operates at approximately 150 µA/MHz in Run mode.
Typical applications include battery-powered sensor nodes, industrial condition monitoring equipment, compact human-machine interfaces, metering devices, connected low-power accessories, and portable measurement products. The 53 I/O pins allow a single controller to supervise displays, sensors, actuators, and communication interfaces without an additional I/O expander.
When laying out the board, keep the 32 MHz crystal or oscillator path compact and route high-current switching nodes away from analog inputs and the Cortex-M3 supply pins. Review the pin-description table in the manufacturer datasheet when assigning board functions, and confirm startup, debug, and programming requirements before releasing the PCB layout.
This page combines manufacturer specifications, package details, drop-in alternatives, parameter comparisons, and practical design guidance to support component selection, firmware planning, and PCB footprint verification for the EFM32TG842F32-QFP64.
חלופות תחליף ישיר עבור EFM32TG842F32-QFP64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EFM32TG842F32-QFP64 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Flash Memory, Processor Core, RAM, Low-Power Features.
EFM32TG842F32-D-QFP64
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG842F32-D-QFP64R
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG842F16-D-QFP64
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EFM32G842F32-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG232F32-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG842F32-QFP64 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M3 Microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3, 32-bit RISC |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 4 KB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| ADC | 12-bit ADC |
| Security Accelerator | AES hardware accelerator |
| Display Support | LCD controller |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Run Mode Current | 150 µA/MHz |
| Stop Mode Current | 0.6 µA |
| מארז | 64-TQFP (10 x 10 mm) |
| סוג הרכבה | Surface Mount |
מדריך תצורת פינים של EFM32TG842F32-QFP64 64-tqfp (10 x 10 mm)
תצורת פינים עבור EFM32TG842F32-QFP64 (מארזת 64-tqfp (10 x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EFM32TG842F32-QFP64.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EFM32TG842F32-QFP64 מתאים עבור 6 יישוםs: Battery-Powered Wireless Sensor Nodes, Industrial Condition Monitoring, Smart Metering and Utility Terminals, Compact Human-Machine Interfaces, Portable Medical and Wellness Devices, Connected IoT Accessories.
Battery-Powered Wireless Sensor Nodes
The EFM32TG842F32-QFP64 suits compact battery-powered sensor nodes because its low-power platform supports Stop mode at 0.6 µA, Run-mode operation near 150 µA/MHz, fast wake-up, and autonomous peripheral activity. A radio or sensor interface can be serviced in short active intervals while the Cortex-M3 core remains inactive between measurements. The 53 digital I/O pins provide connections for sensors, status indicators, and configuration switches without requiring an I/O expander, while the AES accelerator can protect transmitted data.
מומלץ
Industrial Condition Monitoring
The EFM32TG842F32-QFP64 can serve as the central controller for industrial condition-monitoring equipment that samples vibration, temperature, or current signals and retains local event records. Its 12-bit ADC supports analog measurement, while two 16-bit timers provide timing references for periodic sampling. The 32 MHz Cortex-M3 core has sufficient performance for signal conditioning, threshold evaluation, and communication-stack overhead, and the 1.85 V to 3.8 V supply range supports common industrial rail arrangements.
מומלץ
Smart Metering and Utility Terminals
The EFM32TG842F32-QFP64 fits metering and utility-terminal designs that must combine data acquisition, local display control, and low standby consumption. Its LCD support allows direct integration of a local operator display, while the 53 digital I/O pins can connect pulse inputs, alarm outputs, and interface signals. The 4 KB RAM is suitable for short working buffers, and the AES accelerator supports encrypted credential or telemetry handling when paired with a communications module.
מומלץ
Compact Human-Machine Interfaces
The EFM32TG842F32-QFP64 is appropriate for compact human-machine interfaces combining an LCD, buttons, indicator LEDs, and one or more sensors. Integrated LCD support reduces the external controller requirement, and 53 digital I/O pins leave ample connections for panel inputs and outputs. The 32 MHz Cortex-M3 core can drive graphical updates and interface logic, while low-power modes help extend operating time in handheld or panel-mounted equipment that spends substantial time waiting for user input.
מומלץ
Portable Medical and Wellness Devices
The EFM32TG842F32-QFP64 can support portable medical and wellness devices that measure small analog signals and control low-power peripherals. Its 12-bit ADC provides a practical measurement channel, the timers support precise sampling intervals, and the AES accelerator can protect stored or transmitted information. The low-power architecture is valuable when the device must operate for long periods between measurements, although medical designs require application-specific validation, safety analysis, and the use of an approved external interface.
מומלץ
Connected IoT Accessories
The EFM32TG842F32-QFP64 works well in connected accessories that coordinate a sensor front end, local user controls, and a serial or wireless communications module. Its 32 MHz Cortex-M3 core handles protocol framing and application logic, while the hardware AES accelerator reduces the processing burden of encrypted links. The 53 I/O pins permit sharing of the MCU across a display, buttons, and communication module, and the Stop-mode figure of 0.6 µA helps minimize consumption during idle periods.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EFM32TG842F32-QFP64 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EFM32TG842F32-D-QFP64 | EFM32TG842F32-D-QFP64R | EFM32TG842F16-D-QFP64 | EFM32G842F32-QFP64 | EFM32TG232F32-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | TQFP-64 (10 x 10 mm) | TQFP-64 (10 x 10 mm) - same | TQFP-64 (10 x 10 mm) - same | TQFP-64 (10 x 10 mm) - same | TQFP-64 (10 x 10 mm) - same | TQFP-64 (10 x 10 mm) - same |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 32 KB |
מבדילים עיקריים
- 32 KB Flash with LCD support in the same 64-pin footprint (לעומתEFM32TG842F16-D-QFP64)
- Lower RAM demand with the same core speed and Flash capacity (לעומתEFM32G842F32-QFP64)
- Two 16-bit timers with LCD and AES hardware integration (לעומתEFM32TG232F32-QFP64)
הערות תכנון
Treat the TQFP-64 land pattern as a device-specific 10 x 10 mm, 0.5 mm pitch footprint. Verify the package drawing in the manufacturer datasheet for pin-one orientation, exposed-pad requirements, and courtyard dimensions before releasing Gerber data. Place the 32 MHz crystal or oscillator close to its assigned pins, keep the ground return path short, and avoid routing communications or switching-regulator traces beneath the timing component.
Decouple each supply rail with the minimum and maximum capacitor values recommended in the EFM32TG842 datasheet, and place the closest capacitor directly beside the VDD and ground pins. Validate the startup ramp against the device's operating-voltage limits and power-management requirements. A separate analog or low-noise rail should be filtered if the 12-bit ADC is used for precision measurements.
Keep the 32 MHz clock path short, continuous, and away from ADC inputs and switching nodes. Use a solid ground plane under the device and route high-current outputs separately from sensitive measurement nets. When the LCD, ADC, or communications peripheral is active, check the pin-muxing table because several peripheral signals can share the same I/O pins and may conflict with a board-level assignment.
מידע על תאימות
The device is an MCU rather than an automotive-qualified power component, so AEC-Q100 is marked not applicable. Confirm RoHS, REACH, halogen-free, and conflict-minerals documentation for the exact orderable part with the manufacturer.