EP4CE15F17C8LN - 15,408-Cell Cyclone IV E FPGA | Altera
MPN: EP4CE15F17C8LN ✓ פעילEP4CE15F17C8LN סקירה
A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The Cyclone IV E family occupies the FPGA branch of programmable-logic devices, combining configurable logic blocks, embedded block RAM, and programmable I/O in one integrated circuit. This integration allows engineers to implement parallel control logic, hardware data paths, protocol interfaces, and acquisition functions without using multiple fixed-function logic devices.
The EP4CE15 variant provides 15,408 logic elements and 504 Kb of block RAM for designs requiring substantially more parallel processing capacity than small programmable logic devices. Its 165 I/O provide external connectivity for clocks, data buses, control signals, status indicators, and high-speed serial interfaces. A 1.2 V core supply supports lower-voltage digital operation, while the commercial speed-grade and temperature options suit cost-sensitive industrial, commercial, and embedded-control equipment.
The Cyclone IV E architecture combines configurable logic with on-chip memory resources, allowing frequently accessed data, lookup tables, packet buffers, and control states to remain close to the processing elements. This can improve throughput and reduce external memory traffic in pipelines, communication bridges, and real-time control systems. Quartus design tools support device configuration, timing analysis, programming-file generation, and in-system configuration for the device family.
Typical uses include industrial programmable logic controllers, motor and motion control, data acquisition, interface conversion, communications infrastructure, embedded vision, and low-cost instrumentation. The combination of 15,408 logic elements, 504 Kb of block RAM, and 165 I/O is particularly useful when a design needs deterministic parallel processing, moderate on-chip buffering, and a high pin count in a relatively compact package.
PCB design should prioritize short, impedance-controlled clock and high-speed signal paths, continuous supply planes, and unobstructed access to all power and ground balls. Designers should follow the manufacturer’s pin-assignment, bypass-capacitor, and thermal-layout guidance and verify the selected board stack-up against the device’s stated electrical and package constraints before fabrication.
This page combines the manufacturer’s device attributes with practical implementation guidance, same-package alternatives, application-oriented design context, and a parameter-by-parameter comparison. It also identifies information that requires confirmation against the Cyclone IV E device handbook or package-specific documentation before a new PCB or production configuration is released.
חלופות תחליף ישיר עבור EP4CE15F17C8LN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EP4CE15F17C8LN (אותו גורם צורה וטביעת רגל) — שונים ב Package, Device Type, I/O Count, Logic Blocks, Logic Elements.
EP4CE15F17C9LN
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE15F17C8N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE15F17I8L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE15F17C7LN
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EP4CE15F17I7L
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EP4CE15F17C8LN דירוגים מרביים ומאפיינים חשמליים
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Logic Elements | 15,408 elements |
| Embedded Block RAM | 504 Kb |
| User I/O | 165 I/O |
| מארז | 256-pin FBGA, 17 mm × 17 mm |
| Core Supply Voltage | 1.2 V |
| Process Technology | 60 nm |
| Speed Grade | Grade 8 |
| Temperature Grade | Commercial, 0 °C to 85 °C junction |
| Logic Blocks | 47 blocks |
| Programmable Logic | Configurable digital logic and I/O |
| Memory Resource | 504 Kb embedded block RAM |
| סוג הרכבה | Surface mount |
| Package Pin Count | 256 pins |
מדריך תצורת פינים של EP4CE15F17C8LN 256 pins
תצורת פינים עבור EP4CE15F17C8LN (מארזת 256 pins). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EP4CE15F17C8LN.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EP4CE15F17C8LN מתאים עבור 6 יישוםs: Industrial Programmable Logic Controller, Industrial Motor and Motion Control, Communications Interface Bridge, Data Acquisition and Signal Processing, Embedded Vision Preprocessing, Instrumentation and Test Equipment.
Industrial Programmable Logic Controller
The EP4CE15F17C8LN fits compact PLC and machine-control platforms that need parallel logic execution alongside local data buffering. Its 15,408 logic elements can accommodate sequencing, interlocking, state machines, and multiple communication interfaces, while 504 Kb of block RAM can support buffers, counters, and protocol state. The 165 user I/O provides substantial connectivity for field inputs and outputs without requiring several companion logic devices. In a control design, place critical timing paths on dedicated clock-capable pins and validate the commercial 0 °C to 85 °C junction range against the enclosure’s worst-case internal temperature.
מומלץ
Industrial Motor and Motion Control
The EP4CE15F17C8LN can implement deterministic motor-control sequencing, encoder interfaces, pulse generation, and protection logic in a single Cyclone IV E FPGA. The 15,408 logic elements support parallel control channels and fault handling, while 504 Kb of embedded RAM can hold position histories or sampled reference data. Its 165 user I/O leaves ample pins for encoder channels, pulse-width-modulated commands, gate drivers, and digital interlocks. Designers should use dedicated clock pins for timing-critical encoder or PWM logic and confirm output timing against the selected grade 8 device constraints in Quartus.
מומלץ
Communications Interface Bridge
The EP4CE15F17C8LN is suitable for protocol conversion and data-routing bridges that combine multiple interface domains with real-time packet handling. Its 504 Kb of block RAM can buffer received frames or implement dual-port data storage, and 15,408 logic elements can support framing, checksums, FIFOs, and state machines. With 165 user I/O, the FPGA can accommodate parallel buses alongside narrow serial interfaces. A practical implementation should constrain input and output delays, use clock-capable pins where required, and verify that signal-integrity assumptions for the F17 package remain consistent with the board connector and trace topology.
מומלץ
Data Acquisition and Signal Processing
The EP4CE15F17C8LN provides enough configurable logic and on-chip memory for data-acquisition front ends that perform filtering, correlation, counting, or real-time sampling. The 15,408 logic elements can process several channels in parallel, while 504 Kb of block RAM can reduce repeated transfers to external memory. Its 165 I/O support capture clocks, sample strobes, counters, and parallel sensor data. Engineers should establish acquisition timing from the device clock tree, constrain input paths, and use the manufacturer’s guidance for input buffers and package-level signal integrity when working with high-frequency or low-amplitude sensor signals.
מומלץ
Embedded Vision Preprocessing
The EP4CE15F17C8LN can act as a preprocessing engine for embedded vision by executing line and pixel operations, thresholding, feature extraction, or frame-region selection in parallel. Its 15,408 logic elements support concurrent pipeline stages, and 504 Kb of block RAM can hold short image lines or intermediate results. The 165 user I/O permit connection to image sensors, parallel cameras, memory interfaces, and control signals. Because image processing can create demanding timing paths, the design should use the device’s dedicated clock resources, pipeline operations where necessary, and confirm that the sensor interface’s voltage and timing requirements match the selected I/O standards.
מומלץ
Instrumentation and Test Equipment
The EP4CE15F17C8LN fits instrumentation systems that combine stimulus generation, measurement control, sequencing, and data capture in one configurable device. The 47 logic blocks and 504 Kb of embedded RAM can support multiple instrument channels and local sample storage, while 165 user I/O connect sensors, DACs, ADCs, triggers, and displays. For bench instruments, the commercial temperature range must remain compatible with measured internal temperatures. Layout should isolate sensitive analog sections from FPGA switching activity, use a quiet supply distribution strategy, and validate acquisition and trigger timing through the Quartus timing analyzer.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EP4CE15F17C8LN — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EP4CE15F17C9LN | EP4CE15F17C8N | EP4CE15F17I8L |
|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera |
| Package | 256-pin FBGA (F17) | 256-pin FBGA (F17) - same | 256-pin FBGA (F17) - same | 256-pin FBGA (F17) - same |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Elements | 15,408 elements | 15,408 elements | 15,408 elements | 15,408 elements |
| Embedded Block RAM | 504 Kb | 504 Kb | 504 Kb | 504 Kb |
| User I/O | 165 I/O | 165 I/O | 165 I/O | 165 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | Grade 8 | Grade 9 | Grade 8 | Grade 8 |
| Process Technology | 60 nm | 60 nm | 60 nm | 60 nm |
מבדילים עיקריים
- Commercial grade 8 timing option within the EP4CE15 F17 family (לעומתEP4CE15F17C9LN)
- Commercial junction-temperature specification (לעומתEP4CE15F17I8L)
- Balanced logic, memory, and I/O capacity (לעומתEP4CE15F17C8N)
הערות תכנון
Route the 1.2 V core supply as a low-impedance plane and place the required bypass capacitors close to the associated power balls using the exact F17 power-distribution diagram. Keep sensitive configuration and reference connections away from switching return-current paths. Before layout release, check every supply ball, decoupling position, and power-up sequence in the manufacturer’s package documentation because incomplete connectivity can prevent configuration even when the PCB outline matches.
Reserve escape routes for the 165 user I/O and the device’s dedicated clock, reset, and configuration pins before placing external circuitry. Follow the manufacturer’s recommended pin assignments and avoid substituting ordinary I/O for clock-capable inputs in timing-critical designs. Place configuration storage or an external configuration interface where its traces can meet the required signal-integrity and setup or hold expectations without crossing high-speed routing regions.
Use the F17 package ball map and board stack-up when defining high-speed I/O constraints, and terminate or control impedance according to the interface standard rather than applying one rule to every signal. Keep clocks away from switching I/O and provide a continuous return path beneath each routed clock. After PCB layout, run Quartus timing analysis with the actual board constraints and verify signal-integrity behavior using the final stack-up and interconnect assumptions.
The commercial EP4CE15F17C8LN is specified for a 0 °C to 85 °C junction-temperature range. Estimate the FPGA junction temperature using the selected package thermal model, board copper, airflow, and the actual configuration activity rather than treating the ambient rating as the junction limit. Use a thermal-focused PCB structure and avoid enclosing the assembly without a deliberate thermal path, particularly when the FPGA drives high-speed outputs continuously.
מידע על תאימות
The commercial EP4CE15F17C8LN is not identified as an AEC-Q100 automotive device. Environmental and material compliance should be confirmed against the current manufacturer product declarations before a regulated production release.