ISL26312FVZ - 12-bit 125kSPS 2-ch Diff SAR ADC | Renesas
MPN: ISL26312FVZ ✓ פעילISL26312FVZ סקירה
A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary-search algorithm and a precision internal DAC to converge on the input voltage in one conversion cycle per bit. SAR ADCs sit in the broader category hierarchy of data converter -> ADC -> successive-approximation ADC -> precision data acquisition IC, and are typically chosen over delta-sigma converters when low latency (no pipeline delay), wide input bandwidth, and true-differential inputs are required in industrial control and instrumentation front ends.
Key features include excellent linearity over supply and temperature, an input multiplexer combined with a low-drive buffer amplifier that relaxes external driver requirements, and a proprietary input MUX that supports 1-, 2-, 4-, and 8-channel single-ended configurations as well as 1-, 2-, and 4-channel differential configurations across the family. Typical INL/DNL is better than 1 LSB and the device draws only a few mW at full throughput, making it suitable for battery-powered monitoring.
Typical applications include industrial process control loop measurement, multi-channel sensor data acquisition (temperature, pressure, strain gauges), battery monitoring and management systems, motor-control feedback, and instrumentation front-ends that require low-latency differential conversion. Designers appreciate the combination of small TSSOP footprint, simple SPI interface, and high DC accuracy.
When designing with this device, place the analog and digital ground planes with proper partitioning and keep the REFIN decoupling capacitor as close to the pin as possible to maintain DC accuracy. Use a low-impedance input buffer when driving the AIN pins from high-impedance sensors.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the ISL2631x family, and practical design notes that complement the manufacturer datasheet for fast design-in decisions.
חלופות תחליף ישיר עבור ISL26312FVZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ISL26312FVZ (אותו גורם צורה וטביעת רגל) — שונים ב Resolution, RoHS Status, ADC Architecture, Input Configuration, Interface.
ISL26310FVZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL26311FVZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL26313FVZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL26314FVZ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ISL26312FVZ-T7A
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ISL26312FVZ דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 12 bits |
| Sample Rate | 125 kSPS |
| Number of Channels | 2 differential inputs |
| Input Configuration | Single-ended or true differential |
| ADC Architecture | SAR (Successive Approximation Register) |
| Analog Supply Voltage (AVDD) | 2.7 V to 5.25 V |
| Digital I/O Supply (DVDD) | 1.8 V to AVDD |
| ממשק | SPI-compatible, daisy-chain capable |
| מארז | 16-pin TSSOP |
| Power Consumption | Low-power SAR architecture |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
תצורת פינים של ISL26312FVZ
| פין 1 | AIN0+ — Differential analog input 0, positive |
| פין 2 | AIN0- — Differential analog input 0, negative |
| פין 3 | AGND — Analog ground |
| פין 4 | REF — Voltage reference input/output |
| פין 5 | AVDD — Analog supply voltage (2.7 V to 5.25 V) |
| פין 6 | DGND — Digital ground |
| פין 7 | DVDD — Digital I/O supply (1.8 V to AVDD) |
| פין 8 | CS — Chip select (active low) for SPI interface |
| פין 9 | SCLK — SPI serial clock input |
| פין 10 | SDI — SPI serial data input |
| פין 11 | SDO — SPI serial data output |
| פין 12 | AIN1+ — Differential analog input 1, positive |
| פין 13 | AIN1- — Differential analog input 1, negative |
| פין 14 | AGND — Analog ground |
| פין 15 | DGND — Digital ground |
| פין 16 | DVDD — Digital I/O supply |
יישומים טיפוסיים
ISL26312FVZ מתאים עבור 6 יישוםs: Industrial Process Control, Multi-Channel Sensor Data Acquisition, Battery Monitoring and Management, Motor Control Feedback, Precision Instrumentation Front-End, Portable Medical Devices.
Industrial Process Control
The ISL26312FVZ's 12-bit resolution at 125 kSPS and dual true-differential inputs make it ideal for industrial process control loops where 4-20 mA or 0-10 V transducer signals must be digitized with low latency and excellent common-mode rejection. Each differential channel rejects industrial ground noise and switch-mode ripple, while the SPI interface simplifies isolation barrier implementation. Power consumption in the low-mW range allows deployment in DIN-rail and remote I/O modules without complex thermal design.
מומלץ
Multi-Channel Sensor Data Acquisition
For multi-sensor data acquisition boards, the ISL26312FVZ provides 2 differential channels with an integrated input multiplexer and buffer amplifier that reduces external driver requirements. Sensor front-ends such as strain gauges, thermocouple amplifiers, and pressure transducers connect directly without instrumentation-grade op-amps, simplifying BOM and saving PCB area. The 125 kSPS throughput supports simultaneous sampling of dynamic sensors while 12-bit resolution satisfies most industrial control and predictive maintenance applications.
מומלץ
Battery Monitoring and Management
In battery management systems (BMS), the ISL26312FVZ digitizes cell voltages and pack currents with true-differential inputs that reject ground shift between the high-side battery rail and the low-side control MCU. The low operating voltage range of 2.7 V to 5.25 V matches 3.3 V system rails, and the SPI interface connects to host microcontrollers for state-of-charge computation. Low quiescent current and small TSSOP-16 footprint suit portable and electric-vehicle 12 V/48 V battery packs where board area is constrained.
מומלץ
Motor Control Feedback
Motor control systems require low-latency current and voltage feedback, and the ISL26312FVZ delivers SAR-class conversion with no pipeline delay at 125 kSPS. Two differential channels can digitize phase current and DC-bus voltage simultaneously, feeding FOC or trapezoidal commutation algorithms in real time. The differential input rejects common-mode switching noise from the inverter stage, and the SPI daisy-chain feature allows multiple ISL26312FVZ parts to be addressed from a single MCU SPI peripheral.
מומלץ
Precision Instrumentation Front-End
Test-and-measurement instruments benefit from the ISL26312FVZ's true-differential inputs and SAR architecture, which provide wide input bandwidth and immediate conversion results without the latency of delta-sigma modulators. The 2-channel differential configuration supports bridge sensors, weigh scales, and laboratory data loggers where DC accuracy and channel-to-channel matching matter. Integrated input buffering further simplifies the analog front-end, reducing component count and calibration complexity in precision instrumentation.
מומלץ
Portable Medical Devices
Patient monitors and portable diagnostic equipment require low-power, accurate ADCs in compact footprints, and the ISL26312FVZ delivers 12-bit resolution at low mW dissipation in a TSSOP-16 package. Differential inputs digitize biopotential signals (ECG/EMG) with good common-mode rejection of mains interference, while the SPI interface connects to low-power MCUs running real-time DSP. The 2.7 V minimum supply supports single-cell Li-ion operation, enabling battery-powered patient wearables and bedside monitors.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ISL26312FVZ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ISL26310FVZ | ISL26313FVZ | ISL26314FVZ | ISL26312FVZ-T7A |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | TSSOP-16 | TSSOP-16 (same) | TSSOP-16 (same) | TSSOP-16 (same) | TSSOP-16 (same) |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| Sample Rate | 125 kSPS | 125 kSPS | 125 kSPS | 125 kSPS | 125 kSPS |
| Number of Channels | 2 differential | 1 differential | 4 differential | 8 single-ended | 2 differential |
| Analog Supply | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Digital I/O Supply | 1.8 V to AVDD | 1.8 V to AVDD | 1.8 V to AVDD | 1.8 V to AVDD | 1.8 V to AVDD |
| Interface | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain |
| Packaging Format | Tube | Tube | Tube | Tube | Tape & Reel (7") |
מבדילים עיקריים
- True differential dual inputs in TSSOP-16 (לעומתISL26310FVZ)
- Lower channel count than 4/8-channel variants (לעומתISL26313FVZ)
- Family pin-compatibility for future scaling (לעומתISL26312FVZ-T7A)
הערות תכנון
Partition the PCB into analog and digital ground planes joined at a single point beneath the AGND pin to minimize switching noise coupling into the SAR comparator. Place the REF decoupling capacitor (typically 10 uF ceramic in parallel with 0.1 uF) within 2 mm of the REF pin, and route AVDD traces with wide copper to reduce IR drop. Keep the SCLK trace short and surround it with ground to limit radiated digital noise into the analog front-end.
AVDD should be sourced from a low-noise LDO rather than a switching regulator to preserve the ADC's INL/DNL. DVDD can share a switching regulator if a ferrite bead and 10 uF + 0.1 uF decoupling network isolate the supply. Estimated: at 125 kSPS continuous conversion the ISL26312FVZ draws single-digit mA; a 100 mA LDO provides >10x headroom for transient response.
Drive the AIN+ and AIN- pins with matched source impedances to maximize common-mode rejection. If the sensor is single-ended, bias the negative input to mid-supply (e.g. AVDD/2) using a low-impedance buffer. The integrated input buffer amplifier simplifies driving but still benefits from RC anti-aliasing on the front-end to limit broadband noise folding into the SAR sampling capacitor.
Do not exceed AVDD = 5.25 V or DVDD > AVDD as defined in the datasheet absolute maximum ratings. Avoid floating the CS pin - it must be driven low to enable the SPI interface. When using daisy-chain mode, verify the SDO-to-SDI timing budget across the cascade of devices to avoid setup/hold violations at the maximum SCLK rate.
מידע על תאימות
RoHS and REACH compliance per Renesas product page. Not AEC-Q100 qualified - this part targets industrial and consumer applications, not automotive.