ISL84544IB - Dual SPDT Analog Switch, 2.7-12V | Renesas
MPN: ISL84544IB ✓ פעילISL84544IB סקירה
An analog switch is a semiconductor device that routes signals between external circuit nodes under digital control. The SPDT configuration connects one common terminal to one of two switched terminals at a time. The ISL84544 contains two independent SPDT channels, allowing paired signal paths to be selected by control logic. In the broader hierarchy, it is an interface IC, also described as an analog switch, multiplexer, or signal-routing IC.
The ISL84544 series emphasizes low power consumption below 5 microwatts and low leakage current, with a stated maximum of 100 pA under the cited conditions. Switch timing reaches 35 ns ton and 25 ns toff, while guaranteed break-before-make behavior prevents two switched terminals from momentarily connecting together. These characteristics help preserve signal integrity when the device selects sources, routes test signals, or controls analog paths in compact systems.
The family supports low-voltage single-supply operation and provides on-resistance matching between channels below 1 ohm. Renesas specifically identifies pin-compatible replacements for MAX4544 devices and pin compatibility with MAX323 devices. A 2000V minimum ESD rating adds handling protection for portable and communication equipment, although correct system-level grounding and signal-chain design remain essential.
Typical uses include battery-powered test equipment, handheld instruments, communication systems, audio and video signal routing, and heads-up displays. The switch can isolate a common node from one of two sources or route a signal toward a downstream converter. Its 8-pin SOIC format supports conventional surface-mount assembly, while dual-channel control makes it practical for paired analog paths.
When laying out a circuit, place control traces away from sensitive analog inputs and keep switch-node routing short to minimize parasitic capacitance and pickup. Confirm that signal amplitudes remain within the permitted analog-switch limits and check the break-before-make interval against downstream timing requirements. The production package variant and industrial-grade ordering code should be confirmed before release.
חלופות תחליף ישיר עבור ISL84544IB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ISL84544IBZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX4544CSA+
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX4544ESA+
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL84544IB דירוגים מרביים ומאפיינים חשמליים
| Number of Switches | 2 |
| Switch Configuration | Dual SPDT |
| Supply Voltage Range | +2.7V to +12V |
| On Resistance | 60 ohm |
| On-Resistance Matching Between Channels | <1 ohm |
| Charge Injection | 5 pC maximum |
| Turn-On Time | 35 ns |
| Turn-Off Time | 25 ns |
| Power Consumption | <5 microwatts |
| Leakage Current | 100 pA maximum |
| Maximum Leakage Current at 85C | 10 nA |
| ESD Rating | 2000V minimum |
| Switching Behavior | Guaranteed break-before-make |
| מארז | 8-pin SOIC |
| סוג הרכבה | Surface mount |
| Temperature Grade | Industrial |
מדריך תצורת פינים של ISL84544IB 8-pin soic
תצורת פינים עבור ISL84544IB (מארזת 8-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ISL84544IB.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ISL84544IB מתאים עבור 6 יישוםs: Battery-Powered Test Equipment, Portable Communication Systems, Audio and Video Signal Routing, Headset and Head-Up Display Switching, Automated Measurement Multiplexing, Low-Power Sensor Signal Switching.
Battery-Powered Test Equipment
The ISL84544IB fits battery-powered test equipment because it operates from +2.7V to +12V and consumes less than 5 microwatts. Two independent SPDT channels can select paired inputs without adding a separate multiplexer around each signal path. The 35 ns ton and 25 ns toff characteristics support fast source selection, while 100 pA maximum leakage limits disturbance of high-impedance measurement nodes. A 60 ohm on-resistance should be compared with the source impedance and acquisition bandwidth before finalizing the input network.
מומלץ
Portable Communication Systems
The ISL84544IB is suitable for portable communication equipment operating from a low-voltage single supply. Its less-than-5-microwatt power consumption and low leakage reduce loading on compact power budgets, while dual SPDT channels can route transmit, receive, or test paths under digital control. The guaranteed break-before-make behavior helps prevent two RF-adjacent or baseband paths from being connected together during transition. Signal-node voltage, bandwidth, and control timing must be checked against the specific transceiver architecture.
מומלץ
Audio and Video Signal Routing
The ISL84544IB supports audio and video routing by placing two independently controlled SPDT switches in an 8-pin surface-mount package. Renesas identifies audio and video switching among the target applications. The device's 35 ns turn-on and 25 ns turn-off times are fast for many low-frequency and moderate-bandwidth paths, while the 60 ohm on-resistance can be significant for high-impedance audio inputs. System-level matching, grounding, and charge-injection limits should be evaluated using the actual source and receiver impedances.
מומלץ
Headset and Head-Up Display Switching
The ISL84544IB can select audio or display-related paths in headset and heads-up-display electronics. Its dual SPDT organization permits two coordinated routes to share one common destination, reducing the number of discrete switches needed for source selection. The +2.7V minimum supply supports compact portable systems, and less than 5 microwatts of power consumption supports low-energy operation. Designers should account for the 60 ohm on-resistance, 5 pC maximum charge injection, and any pop or transient introduced by switching time and system impedance.
מומלץ
Automated Measurement Multiplexing
The ISL84544IB is useful in automated measurement systems where two SPDT channels must route instrumentation signals under control. Fast 35 ns ton and 25 ns toff timing reduce settling delays, and guaranteed break-before-make operation avoids an unintended momentary connection between switched sources. The 60 ohm on-resistance is appropriate for many moderate-impedance measurement paths but may require buffering for high-impedance sensors. Place the device close to the source-selection nodes and keep digital control routing away from sensitive analog traces.
מומלץ
Low-Power Sensor Signal Switching
The ISL84544IB can route low-level sensor signals where leakage and power consumption are important design constraints. The specified maximum leakage current of 100 pA minimizes disturbance of high-impedance sensor nodes, while less-than-5-microwatt operation limits the switch's contribution to a battery-powered budget. Its two SPDT channels permit selection between sensor, reference, or calibration paths. The designer should verify the complete leakage budget, including PCB contamination and external bias resistors, and ensure the 60 ohm on-resistance meets the sensor's load requirements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ISL84544IB — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ISL84544IBZ | MAX4544CSA+ | MAX4544ESA+ |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Maxim Integrated | Maxim Integrated |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Switch Configuration | Dual SPDT | Dual SPDT | Dual SPDT | Dual SPDT |
מבדילים עיקריים
- Extremely low switching-circuit power contribution (לעומתMAX4544CSA+)
- Fast, guaranteed break-before-make operation (לעומתMAX4544ESA+)
- Close on-resistance matching between channels (לעומתMAX4544CSA+)
- Direct Renesas ordering continuity (לעומתMAX4544CSA+)
הערות תכנון
Keep the switched analog nodes short and place the ISL84544IB close to the multiplexer or routing point. The 60 ohm on-resistance is modest compared with low-impedance drive circuits, but it can attenuate high-impedance or precision sensor paths. Route the two control inputs away from analog switch nodes, use a continuous ground reference, and avoid placing long copper traces beneath sensitive inputs where switching transients can couple into them.
Decouple the +2.7V to +12V supply locally and keep the analog and digital return currents separate at the board level. Although the device's power consumption is below 5 microwatts, nearby pull resistors, control-driver leakage, and switched-node loading can dominate the real power budget. Verify the supply range at the IC pins under load and account for the 100 pA maximum leakage when designing around high-impedance sources.
Do not infer full equivalence from an 8-pin SOIC outline alone. Before substituting MAX4544CSA+ or MAX4544ESA+, compare the control truth table, switched-terminal assignments, electrical limits, temperature grade, and break-before-make timing. The target family provides guaranteed break-before-make operation, so a mechanically similar replacement that permits overlap may alter the behavior of a source-selection circuit.
Treat a transition of the ISL84544IB as a potential charge-injection event even though its maximum charge injection is only 5 pC. Use a low-impedance receiving stage when transients matter, provide a defined return path for each switched signal, and examine the layout with an oscilloscope when selecting between sources. Fast 35 ns turn-on and 25 ns turn-off edges can couple into nearby high-impedance traces even when the nominal signal bandwidth is low.
מידע על תאימות
The manufacturer product page does not state the requested environmental or material-compliance statuses. AEC-Q100 is not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.