LFE2-6SE-5F256I - 6000-LUT ECP2 FPGA, 256-BGA | Lattice
MPN: LFE2-6SE-5F256I ✓ פעילLFE2-6SE-5F256I סקירה
An FPGA is a programmable semiconductor in which logic, interconnect, and I/O behavior are configured through a bitstream rather than fixed during fabrication. ECP2 devices occupy the FPGA hierarchy alongside field-programmable gate arrays, programmable logic, and digital logic devices. Their combination of LUT-based logic, embedded block RAM, programmable I/O, and high-speed serial resources supports parallel processing, control, signal conditioning, and interface bridging within a single package.
The LFE2-6SE-5F256I provides 6000 logic elements organized into 750 LABs or CLBs. Its 56,320 RAM bits support buffers, lookup tables, packet storage, and embedded data processing, while 190 I/O pins provide substantial interface capacity. The S-Series DSP feature set allows the FPGA fabric to implement parallel arithmetic, filtering, and fixed-point processing functions without requiring a separate DSP device in many designs.
The device uses a 1.2 V supply for its programmable logic core. Its 256-BGA package is approximately 17 mm by 17 mm and is intended for surface-mount assembly. Because a BGA package has solder balls beneath the device, PCB layout must account for via-in-pad or via-under-ball routing, thermal management, assembly process capability, and the manufacturer’s recommended land pattern and component placement rules.
Typical uses include industrial control, communications infrastructure, test and measurement, embedded signal processing, video interface bridging, and compact data-acquisition systems. The combination of 190 I/O and 56,320 RAM bits is particularly useful for designs that connect multiple buses, capture parallel data, and perform local processing without adding a separate high-speed memory device.
Design decisions should begin with the intended clock rate, I/O voltage standards, RAM usage, pin constraints, and thermal environment. Because the -5 and I suffixes encode device-specific ordering information, engineers should confirm speed, temperature, and qualification requirements against the manufacturer documentation before releasing a production BOM.
This page organizes the core ECP2 resources, package characteristics, drop-in candidates, design guidance, and application-specific engineering considerations into a practical selection reference for FPGA hardware development.
חלופות תחליף ישיר עבור LFE2-6SE-5F256I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LFE2-6SE-5F256I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Logic Elements, Package Type, Speed Grade.
LFE2-6SE-5FN256I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LFE2-6SE-5FN256C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LFE2-6E-5F256I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LFE2-6SE-5F256I דירוגים מרביים ומאפיינים חשמליים
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 6000 LEs |
| Logic and Cluster Blocks | 750 LABs/CLBs |
| General-Purpose I/O | 190 pins |
| Embedded RAM | 56320 bits |
| Core Supply Voltage | 1.2 V |
| תדר שעון מקסימלי | 311 MHz |
| DSP Capability | S-Series DSP |
| Process Technology | 90 nm |
| מארז | 256-BGA |
| Package Type | FPBGA-256 |
| Package Dimensions | 17 mm x 17 mm |
| סוג הרכבה | Surface Mount |
| Lead-Free Status | Lead Free |
מדריך תצורת פינים של LFE2-6SE-5F256I 17 mm x 17 mm
תצורת פינים עבור LFE2-6SE-5F256I (מארזת 17 mm x 17 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור LFE2-6SE-5F256I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LFE2-6SE-5F256I מתאים עבור 6 יישוםs: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communications Interface Bridging, Test and Measurement Instrumentation, Video and Display Interface Processing, Embedded DSP and Parallel Filtering.
Industrial Control and Automation
The LFE2-6SE-5F256I fits industrial control logic that must coordinate sensors, actuators, interlocks, and communication interfaces. Its 190 general-purpose I/O provide substantial parallel connectivity, while 6000 logic elements can implement sequencing, state machines, counters, fault handling, and protocol control. The 56,320 RAM bits can serve as local status and diagnostic buffers. S-Series DSP resources also support filtering or condition calculations close to the acquisition logic. Confirm the exact temperature and qualification suffix against the machine’s environmental requirements before production release.
מומלץ
Data Acquisition and Signal Conditioning
The LFE2-6SE-5F256I is suitable for parallel data-acquisition front ends that capture sensor outputs and perform local filtering, thresholding, or calibration. Its 190 I/O permit multiple digital channels and bus connections without requiring a separate interface device, while the S-Series DSP fabric can accelerate fixed-point arithmetic. The 56,320-bit RAM capacity is useful for sample buffering and intermediate processing. A production design should use the manufacturer’s timing constraints to close acquisition paths and confirm that the selected I/O standard is supported at the required clock rate.
מומלץ
Communications Interface Bridging
The LFE2-6SE-5F256I can bridge incompatible digital interfaces by converting widths, buffering packets, and coordinating timing between external blocks. The 6000 logic elements are appropriate for protocol state machines and parallel-to-serial conversion logic, while the 190 I/O permit substantial host-bus and transceiver connectivity. Its 56,320 RAM bits can absorb local packet or command queues. Pin assignments and I/O standards should be selected from the device constraints file, and timing should be verified for every high-speed path crossing between the FPGA fabric and external circuitry.
מומלץ
Test and Measurement Instrumentation
The LFE2-6SE-5F256I fits programmable test and measurement equipment that combines pattern generation, response capture, timing control, and status reporting. Its 190 I/O support probes and instrument buses, while S-Series DSP resources support averaging, filtering, calibration, and other real-time numerical operations. The 56,320-bit RAM can be partitioned into acquisition buffers and temporary test vectors. For laboratory-to-production migration, preserve the same I/O standards and timing margins and verify that the configuration bitstream supports the exact selected device suffix.
מומלץ
Video and Display Interface Processing
The LFE2-6SE-5F256I can support display timing, pixel-stream formatting, test-pattern generation, and interface adaptation in compact embedded video systems. Its 190 I/O provide broad connectivity for parallel pixels, control signals, and external memory interfaces, while the programmable fabric can implement timing generators and format converters. The embedded RAM offers limited but useful storage for line buffers or timing records. System designers should confirm signal-integrity margins, output timing, and color or control-signal mapping in the target display standard before hardware release.
מומלץ
Embedded DSP and Parallel Filtering
The LFE2-6SE-5F256I supports embedded DSP functions such as parallel filtering, arithmetic pipelines, and signal transformation because its ECP2 S-Series fabric is optimized for these operations. The 6000 logic elements provide control and datapath resources, and the 56,320 RAM bits can hold coefficients, sample windows, or intermediate vectors. A practical implementation should map the algorithm to the DSP resources, apply fixed-point rules consistently, and validate timing at the selected operating clock. The same-device candidates can assist with sourcing studies, but suffix-specific qualification still requires review.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LFE2-6SE-5F256I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LFE2-6SE-5FN256I | LFE2-6SE-5FN256C | LFE2-6E-5F256I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-BGA | 256-BGA - same | 256-BGA - same | 256-BGA - same |
| Device Family | ECP2 | ECP2 | ECP2 | ECP2 |
מבדילים עיקריים
- High I/O availability for a 6000-logic-element ECP2 device (לעומתLFE2-6SE-5FN256I)
- On-chip memory supports local buffering and fixed-point processing (לעומתLFE2-6SE-5FN256C)
- Single-package integration reduces external sequencing logic (לעומתLFE2-6E-5F256I)
הערות תכנון
Use the exact manufacturer land pattern for the 256-BGA package and preserve the orientation mark, power balls, ground balls, and exposed thermal connections. Plan BGA escape routing before assigning FPGA I/O; this avoids late layer changes that can block high-speed routes. The package is approximately 17 mm by 17 mm, so a dense breakout strategy may require multiple signal layers and careful via placement beneath the device.
The FPGA core operates at 1.2 V, but the selected bank supplies and I/O standards must also be planned. Separate core and I/O distribution paths where practical, provide local bulk and high-frequency decoupling at each supply domain, and keep return-current paths continuous. Account for startup current, I/O loading, configuration activity, and the worst-case resource and switching state rather than estimating dissipation from nominal logic use alone.
Review every external interface against its target clock rate and I/O standard rather than relying only on the device’s 311 MHz maximum clock frequency. Constrain input and output timing in the implementation project, preserve adequate spacing for simultaneous switching, and confirm that the selected pin pairs and banks meet the intended interface topology. Re-run timing and signal-integrity simulations after final pin assignment because moving a signal can change routing congestion and return paths.
Do not treat similarly named ECP2 devices as automatically interchangeable. Before replacing the target, compare the speed and temperature suffix, qualification status, supported configuration method, pin functions, and electrical limits. Recompile the bitstream for the exact selected MPN, confirm that the programmer or configuration source supports it, and perform a power-up and interface validation on production hardware.
The BGA package relies on effective heat transfer through its solder-ball and board-level thermal path. Follow the manufacturer’s package drawing for exposed-pad or thermal-ball treatment and preserve copper beneath the device where directed. Thermal performance should be evaluated using the final PCB stack-up, enclosure, and worst-case activity pattern because changing regulator efficiency, I/O loading, or airflow can materially alter junction temperature.
מידע על תאימות
The LFE2-6SE-5F256I is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status are not established by the listed product information and require confirmation from the manufacturer.