Lattice Semiconductor

LFE2-70E-6F900C - 68K LUT ECP2 FPGA, 900-BBGA | Lattice

MPN: LFE2-70E-6F900C ✓ פעיל
1.2 V nominal Vdss 900-BBGA Package -6 Speed
כמות הזמנה מינימלית: 1 |

LFE2-70E-6F900C סקירה

The Lattice Semiconductor LFE2-70E-6F900C is an ECP2 field-programmable gate array with 68,000 logic elements, 68K LUTs, and 583 I/O in a 900-BBGA package. It operates from a nominal 1.2 V supply, with a listed voltage range of 1.14 V to 1.26 V, and uses the -6 speed grade. Its 900-ball package makes the device suited to high-pin-count systems requiring substantial programmable logic and parallel I/O.

An FPGA is a programmable semiconductor whose internal lookup tables, registers, interconnect, and configurable I/O are defined by a design file. Within the broader device hierarchy, the LFE2-70E-6F900C belongs to the ECP2 family of FPGAs, a form of programmable logic used for parallel processing, control, interface bridging, signal generation, and embedded system functions. Unlike a fixed-function ASIC, an FPGA permits design revisions and logic changes without fabricating a new custom chip.

The 68K LUT capacity provides substantial parallelism for control logic, data acquisition, protocol handling, and embedded signal processing. Its 583 I/O allow a designer to connect substantial numbers of external devices on a compact 31 mm by 31 mm package. The nominal 1.2 V core voltage and -6 speed designation place the device in the ECP2 performance range for systems balancing logic density, I/O count, power, and board-space requirements.

The ECP2 architecture supports configurable logic and programmable routing rather than relying on a fixed processor instruction sequence. This makes parallel datapaths and fixed-latency control functions practical when the design is synthesized for the LFE2-70E-6F900C. PCB design must account for the dense 900-ball land pattern, high pin count, power-supply integrity, decoupling, programming access, and thermal performance associated with a large programmable logic package.

Typical uses include industrial automation, communications infrastructure, test and measurement equipment, embedded control, and high-density interface consolidation. Its 583 I/O is particularly useful where numerous external memories, converters, transceivers, sensors, and digital peripherals must be connected. The -6 grade should be checked against the required clocking and system-timing targets before a design is committed to production.

Power delivery and signal integrity are the principal layout concerns for this device. Place the core and I/O supply decoupling directly beside the corresponding BGA power balls, provide a stable ground reference, and follow the manufacturer package and power-territory guidance. Programming signals must remain accessible in the production test configuration, and the assembled board must tolerate the package's thermal and mechanical requirements.

This product guide combines the device's exact ECP2 identifiers with package-compatible alternatives, application guidance, comparison data, and practical PCB considerations. It is structured to help engineers identify whether the LFE2-70E-6F900C matches their logic-density, I/O, package, speed-grade, and sourcing requirements before beginning schematic capture.

חלופות תחליף ישיר עבור LFE2-70E-6F900C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LFE2-70E-6F900C (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Speed Grade.

Lattice Semiconductor
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Package: 900-BBGA, square ball-grid array
Speed Grade: -5
השווה עם LFE2-70E-6F900C →

LFE2-70E-6FN900C

✅ Drop-In
📦 900-BBGA
Same 900-BBGA footprint, 68K LUT capacity, 583 I/O, 1.2 V supply, and -6 speed grade; headline performance difference is 0%.

📋 חלופה להתייחסות (לא בקטלוג)

LFE2-70E-6F900C דירוגים מרביים ומאפיינים חשמליים

Device Type ECP2 field-programmable gate array (FPGA)
Logic Elements 68,000
Lookup Tables 68K LUTs
User I/O 583 I/O
Core Voltage 1.2 V nominal
Supply Voltage Range 1.14 V to 1.26 V
Speed Grade -6
מארז 900-BBGA
Package Dimensions 31 mm x 31 mm
Terminal Count 900 balls
Terminal Form Ball grid array
Programming Field-programmable

מדריך תצורת פינים של LFE2-70E-6F900C 31 mm x 31 mm

תצורת פינים עבור LFE2-70E-6F900C (מארזת 31 mm x 31 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 31 mm x 31 mm עבור LFE2-70E-6F900C

אין נתוני פריסת פינים מפורטים עבור LFE2-70E-6F900C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LFE2-70E-6F900C מתאים עבור 6 יישוםs: Industrial Automation Controller, Communications Interface Consolidation, Test and Measurement Equipment, High-Density Data Acquisition, Embedded Signal Processing, Secure Network Edge Equipment.

🏭

Industrial Automation Controller

The LFE2-70E-6F900C fits industrial automation controllers that require parallel logic, many peripheral connections, and deterministic control functions. Its 68K LUT capacity can accommodate state machines, interlocks, motion-command logic, and signal-processing functions, while 583 I/O provides connections for sensors, encoders, actuators, isolated transceivers, and converters. Place the device in a -6 speed-grade system only after confirming the required internal and I/O timing. The 1.14 V to 1.26 V core range also requires a regulator and distribution network designed for a 1.2 V nominal supply.

🌐

Communications Interface Consolidation

The LFE2-70E-6F900C is useful in communications equipment where parallel data paths and numerous digital connections must be consolidated into a programmable platform. Its 68K LUT capacity supports framing logic, buffering, protocol adaptation, and test instrumentation, while 583 I/O offers substantial connectivity to transceivers, memories, network processors, and clock sources. Design the board around the 900-BBGA footprint and assign the appropriate core and I/O voltage domains. For interfaces operating above the FPGA core voltage, use purpose-built level shifters rather than relying on unsupported I/O configurations.

⚡

Test and Measurement Equipment

The LFE2-70E-6F900C can serve as the central programmable logic device in test and measurement systems requiring flexible timing, acquisition, and channel-control logic. The 68K LUT capacity allows multiple parallel channels, while 583 I/O can connect converters, memories, trigger circuits, status displays, and external test ports. Its -6 grade provides the timing basis for evaluating the design against the required sample rate or clock frequency. Care should be taken with analog grounding, clock jitter, termination, and the separation of sensitive measurement paths from high-current output circuitry on the same board.

📺

High-Density Data Acquisition

The LFE2-70E-6F900C is appropriate for data-acquisition systems that must collect and organize signals from numerous channels. Its 583 I/O can support external ADC and DAC interfaces, while 68K LUT capacity can implement acquisition control, channel tagging, filtering, and data packing. The 1.2 V nominal core operation allows the FPGA to sit beside compatible low-voltage converters, although each attached device still requires suitable interface levels. The -6 speed grade and specified I/O timing must be matched to the acquisition clock, and the completed design should be checked for routing congestion around the large pin count.

🧩

Embedded Signal Processing

The LFE2-70E-6F900C supports embedded signal-processing functions implemented as parallel FPGA logic. With 68K LUTs, the device can host multiple filters, correlation engines, data-format converters, or fixed-function control blocks when synthesis reports confirm the required resources. The 583 I/O allows direct connection to converters, external memories, and digital sensor interfaces. Engineers should evaluate whether dedicated DSP resources or system RAM are required rather than assuming all processing fits in general-purpose LUTs. Clock-domain crossings, pipeline latency, and timing closure should be reviewed early in the architecture phase.

🖥️

Secure Network Edge Equipment

The LFE2-70E-6F900C can implement packet handling, traffic classification, interface bridging, and protocol termination at the edge of a network appliance. The 68K LUT capacity supports multiple concurrent datapaths, and the 583 I/O provides connectivity for network transceivers, packet memories, management controllers, and status interfaces. A 900-BBGA implementation demands careful layer-stack planning, power-plane distribution, and signal-integrity analysis. For designs requiring cryptographic functions or protocol accelerators, check whether dedicated hardware resources or external IP are needed and include the corresponding licensing in the implementation plan.

What are the key specifications of LFE2-70E-6F900C?
The LFE2-70E-6F900C is a 1.2 V ECP2 FPGA providing 68K LUTs, 68,000 logic elements, and 583 I/O in a 900-BBGA package. According to the Lattice Semiconductor product information, the device uses the -6 speed grade and is supplied in a 31 mm by 31 mm package. Its principal engineering value is the combination of high programmable-logic density and a large I/O count, making it appropriate for industrial control, communications, test equipment, and interface-consolidation designs. Designers should confirm the required timing, embedded-memory capacity, and operating-temperature grade in the manufacturer datasheet before releasing the PCB.
What is the operating voltage of LFE2-70E-6F900C?
The LFE2-70E-6F900C operates from 1.14 V to 1.26 V, with a nominal core voltage of 1.2 V. According to the Lattice Semiconductor ECP2 device listing, this is a 1.2 V FPGA in the -6 speed grade. The supply range must be considered alongside the board's power-rail tolerance, I/O requirements, startup behavior, and the power needs of attached peripherals. Use separate, adequately decoupled paths where the system combines the FPGA core with other voltage domains, and confirm regulator accuracy and sequencing against the manufacturer power specifications.
How many LUTs and I/O does LFE2-70E-6F900C have?
The LFE2-70E-6F900C contains 68K LUTs, corresponding to 68,000 logic elements, and provides 583 user I/O. According to the Lattice Semiconductor ECP2 product listing, these resources are housed in a 900-BBGA package. The 68K LUT figure should be used as the starting point for synthesis utilization rather than a promise that every design can occupy all LUTs. RAM, DSP, clocking, routing, and control resources can reduce the number available for general Boolean logic, so review the post-synthesis resource report against the target design.
What package does LFE2-70E-6F900C use?
The LFE2-70E-6F900C uses a 900-ball BGA package measuring 31 mm by 31 mm. Product listings from Lattice Semiconductor identify the package as 900-BBGA, while another device listing describes it as a 900-pin fpBGA. According to the manufacturer package information, the large land pattern supports 583 user I/O but requires careful PCB layout. Confirm ball assignments, power territories, thermal vias, and assembly tolerances directly from the manufacturer package documentation before releasing fabrication files.
Where can I download the LFE2-70E-6F900C datasheet PDF?
The LFE2-70E-6F900C datasheet and technical information can be found through the Lattice Semiconductor ECP2 documentation and the linked datasheet landing page for this exact device. According to the manufacturer documentation, engineers should use the pin list, package drawings, electrical characteristics, and programming information to define the design. The available datasheet landing page identifies a PDF published in 2013 and links to device documentation, but engineers should also consult the current ECP2 family documentation for design-rule and programming guidance.
Where can I find the LFE2-70E-6F900C pinout?
The LFE2-70E-6F900C pinout is defined by the manufacturer's 900-BBGA package documentation and the device's pin-description tables. Because a 900-ball package contains too many connections to reproduce accurately in a short page summary, use the manufacturer ball-map and package drawing when assigning PCB nets. According to the Lattice ECP2 documentation, engineers must also follow the prescribed power, ground, configuration, and test-pin assignments rather than inferring connections from a generic BGA footprint.
Can LFE2-70E-6F900C replace LFE2-70E-6FN900C?
Yes, the LFE2-70E-6FN900C is identified as a pin-compatible drop-in replacement for the LFE2-70E-6F900C. The cross-reference data states that both use an fpBGA-900 package with consistent terminals, while listing the same 68K LUT capacity, 583 I/O, 1.2 V supply, and -6 speed grade. Despite that close alignment, the final ordering-code and temperature-grade meanings should be checked against the manufacturer documentation before production substitution. Programming files and configuration behavior should also be validated on the actual replacement device.
What is the best drop-in replacement for LFE2-70E-6F900C?
The LFE2-70E-6FN900C is the confirmed drop-in replacement because it retains the 900-BBGA footprint and matches the target's 68K LUT capacity, 583 I/O, 1.2 V supply, and -6 speed grade. According to the component comparison data, the terminals and packages are consistent and replacement does not require modification of the existing circuit. No other cross-brand, pin-compatible 900-BBGA alternative was established. If the original selection depends on a specific temperature grade, qualification level, or configuration detail, verify that ordering attribute before approving the substitution.
LFE2-70E-6F900C vs LFE2-70E-6FN900C — which is better?
The two devices are functionally equivalent for most FPGA designs because both provide 68K LUTs, 583 I/O, a 1.2 V supply, the -6 speed grade, and a 900-BBGA package. The LFE2-70E-6FN900C is specifically documented as a complete, pin-compatible replacement for the LFE2-70E-6F900C. According to the comparison listing, no board modification is required. Selection should therefore follow the ordering-code temperature or qualification attributes defined by Lattice Semiconductor, rather than basic logic capacity, since the headline electrical and package ratings are identical.
When should I choose LFE2-70E-6F900C over LFE2-70E-6FN900C?
Choose the LFE2-70E-6F900C when it matches the exact device specified by an existing board, qualification record, or controlled procurement list. Choose the LFE2-70E-6FN900C when a documented drop-in substitute is needed. According to the cross-reference information, both devices share the 900-BBGA package, 68K LUT capacity, 583 I/O, 1.2 V supply, and -6 speed grade. For safety-critical or environmentally demanding production, check the decoded ordering information and application qualification requirements rather than treating the suffix change alone as an automatic qualification.
Is LFE2-70E-6F900C suitable for industrial control systems?
The LFE2-70E-6F900C is suitable for industrial control when its logic, I/O, timing, and temperature requirements match the design. Its 68K LUT capacity supports parallel control and datapath logic, while 583 I/O can accommodate multiple sensors, converters, memories, and communication devices. According to the Lattice Semiconductor ECP2 listing, the device uses a 900-BBGA package and -6 speed grade. Industrial suitability still depends on the device's specified temperature range, system EMC requirements, functional-safety strategy, and the operating conditions of the assembled equipment.
How do I choose between LFE2-70E-6F900C and an LFE2-70E-6FN900C design?
Choose the LFE2-70E-6F900C for an exact-match design and the LFE2-70E-6FN900C for a drop-in substitution or alternate procurement path. According to the manufacturer component listing, the target has 68K LUTs, 583 I/O, a 1.2 V core supply, the -6 grade, and a 900-BBGA package; the replacement has matching headline ratings. Review the decoded suffix and qualification requirements before changing a released design. Also verify programming, configuration, and board-level test coverage with the exact production device.
What can replace LFE2-70E-6F900C?
The LFE2-70E-6FN900C can replace the LFE2-70E-6F900C on an existing PCB because the documented cross-reference identifies the same 900-BBGA package, consistent terminals, 68K LUTs, 583 I/O, 1.2 V operation, and -6 speed grade. According to the comparison data, circuit modification is not required. No cross-brand replacement with a verified pin-compatible 900-BBGA footprint was identified, so changing FPGA manufacturers would require a full footprint, pinout, timing, power, and design-tool review rather than a drop-in substitution.
Where can I buy LFE2-70E-6F900C online?
The LFE2-70E-6F900C can be requested through the Request a Quote form on this page, where the exact MPN and required quantity should be entered. The device is a 1.2 V ECP2 FPGA with 68K LUTs, 583 I/O, and a 900-BBGA package. Current inventory, lead time, and commercial terms should be confirmed through that form rather than relying on an old listing. Buyers should specify whether the standard LFE2-70E-6F900C or the documented pin-compatible LFE2-70E-6FN900C substitution is required.
What is the price of LFE2-70E-6F900C?
Use the Request a Quote form on this page for the current commercial terms for the LFE2-70E-6F900C. The part is a 68K-LUT, 583-I/O ECP2 FPGA in a 900-BBGA package, and its price can depend on quantity, sourcing condition, and the requested ordering variant. The documented LFE2-70E-6FN900C alternative may be relevant if a pin-compatible sourcing option is acceptable. Include the required quantity and target delivery date in the request to obtain an actionable response.
What is the lead time and stock status for LFE2-70E-6F900C?
Request the current stock status, lead time, and minimum order quantity through the Request a Quote form on this page. The LFE2-70E-6F900C is a 900-BBGA ECP2 FPGA with 68K LUTs, 583 I/O, and a 1.2 V core supply, so package-specific assembly and provisioning can affect availability. A distributor search result may show a shipping claim, but that should not be treated as a guaranteed allocation for a production order. Provide your forecast quantity and required delivery date with the request.
Is there an AMD or Xilinx equivalent for LFE2-70E-6F900C?
No AMD or Xilinx part was established as a pin-compatible drop-in equivalent for the LFE2-70E-6F900C. The confirmed alternative is the Lattice Semiconductor LFE2-70E-6FN900C, which retains the 900-BBGA footprint, 68K LUT capacity, 583 I/O, 1.2 V supply, and -6 speed grade. According to the available cross-reference data, cross-brand alternatives do not share a verified interchangeable footprint. Moving to another FPGA family therefore requires a schematic, layout, timing, power, toolchain, and firmware-migration review rather than a component-ordering substitution.

נתוני עזר הנדסיים עבור LFE2-70E-6F900C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LFE2-70E-6F900C when the exact ordering code is required by a controlled BOM, qualification record, or existing production configuration. Its 68K LUT capacity, 583 I/O, 1.2 V nominal core, -6 speed grade, and 900-BBGA package support high-density programmable control, acquisition, communications, and test systems. The LFE2-70E-6FN900C is the preferred alternate when sourcing flexibility matters, because the documented match retains the same package, logic capacity, I/O count, voltage, and speed grade without PCB changes. No cross-brand drop-in replacement was established, so choosing another FPGA manufacturer requires a full redesign. Before ordering, verify the decoded temperature and qualification attributes, timing targets, embedded-resource needs, and programming requirements for the selected device.

השוואה עם חלופות

פרמטר מוצר זה LFE2-70E-6FN900C
Manufacturer Lattice Semiconductor Lattice Semiconductor
Package 900-BBGA 900-BBGA (fpBGA-900) - same package
Device Family ECP2 FPGA ECP2 FPGA
Logic Elements 68,000 68,000
Lookup Tables 68K LUTs 68K LUTs
User I/O 583 I/O 583 I/O
Core Voltage 1.2 V nominal 1.2 V nominal
Supply Voltage Range 1.14 V to 1.26 V 1.14 V to 1.26 V
Speed Grade -6 -6
Pin Compatibility 900-BBGA reference design Pin-to-pin compatible; no circuit modification required

מבדילים עיקריים

  • Directly documented pin-compatible replacement path (לעומתLFE2-70E-6FN900C)
  • Identical programmable-logic headline capacity (לעומתLFE2-70E-6FN900C)
  • Identical high-density I/O availability (לעומתLFE2-70E-6FN900C)

הערות תכנון

The FPGA core operates from 1.14 V to 1.26 V, so design the power tree for the 1.2 V nominal condition and follow the manufacturer ball assignments for core and I/O supplies. Place high-frequency decoupling capacitors next to their associated power balls and provide additional bulk capacitance near the regulator output. Keep switching supplies and high-current I/O return paths away from sensitive clock and configuration inputs to minimize supply-noise coupling.

The 900-BBGA footprint requires controlled escape routing from the dense ball array. Use the manufacturer stack-up, ball map, and recommended PCB technology rather than estimating the geometry from a generic BGA drawing. Maintain the specified via-in-pad or thermal-via structure, account for differential-pair geometry on high-speed interfaces, and provide unobstructed access to configuration and programming signals for production test.

Do not infer that the LFE2-70E-6F900C and LFE2-70E-6FN900C are interchangeable without checking the decoded ordering attributes and qualification requirements. Their listed 68K LUT capacity, 583 I/O, 1.2 V operation, -6 speed grade, and 900-BBGA footprint match, but procurement, environmental, and configuration requirements must still be reviewed. Revalidate timing closure and configuration behavior with the exact device used for production builds.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were established for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LFE2-70E-6F900C datasheet LFE2-70E-6F900C datasheet pdf LFE2-70E-6F900C pinout LFE2-70E-6F900C 900 BBGA LFE2-70E-6F900C 68K LUT LFE2-70E-6F900C equivalent LFE2-70E-6F900C replacement LFE2-70E-6F900C vs LFE2-70E-6FN900C LFE2-70E-6F900C schematic LFE2-70E-6F900C application circuit LFE2-70E-6F900C price LFE2-70E-6F900C stock Lattice Semiconductor LFE2-70E-6F900C LFE2-70E-6F900C footprint

רכיבים ומונחים קשורים

Lattice Semiconductor LFE2-70E-6F900C LFE2-70E-6FN900C ECP2 FPGA field-programmable gate array programmable logic lookup table LUT logic element user I/O 900-BBGA BGA surface-mount semiconductor 1.2 V 68K LUTs 583 I/O -6 speed grade industrial control communications equipment data acquisition embedded signal processing test and measurement network edge equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר