LPC11U24FBD48/301 - 50MHz Cortex-M0 USB MCU | NXP
MPN: LPC11U24FBD48/301 ✓ פעילLPC11U24FBD48/301 סקירה
A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and communication interfaces on one integrated circuit. The LPC11Uxx family belongs to the 32-bit microcontroller hierarchy and uses the ARM Cortex-M0 instruction set. Its combination of 50 MHz processing, 32 KB flash, USB device connectivity, and integrated memory makes it suitable for compact control, sensing, data-acquisition, and connected peripheral designs.
Key features include a 32-bit ARM Cortex-M0 core operating up to 50 MHz, 32 KB flash, up to 10 KB SRAM, up to 4 KB EEPROM, USB device operation, and USART communication. The LPC11U24FBD48/301 supports 2.5 V and 3.3 V supply operation, while its 48-LQFP package provides a 7x7 mm surface-mount footprint with externally accessible pins for compact PCB layouts.
The LPC11Uxx architecture is intended to provide low-cost 8/16-bit-class microcontroller operation with the benefits of a 32-bit platform. The Cortex-M0 core supports a compact instruction set and efficient embedded software execution, while the integrated USB device interface allows the MCU to communicate directly with a host system. Depending on the selected device variant, the family also includes memory-mapped peripherals and low-power operating characteristics for embedded control applications.
Typical applications include USB-connected data-acquisition modules, energy-metering equipment, industrial sensing nodes, building-control interfaces, portable measurement instruments, and embedded accessories that require a small processor with USB connectivity. The MCU can serve as the central controller for sensor conditioning, local configuration, data formatting, and host communication without requiring a separate USB interface device.
The principal design consideration is power-domain integration. The 2.5 V and 3.3 V operating references must be matched to the voltage levels of the USB interface, attached sensors, and external peripherals. Decoupling, grounding, USB signal routing, and careful placement of the MCU and support components should follow the layout guidance in the manufacturer datasheet. Firmware compatibility should also be verified when selecting a replacement because ROM-code and peripheral differences can affect software behavior.
This product page combines the manufacturer’s device information, distributor availability references, package details, and practical design guidance to help engineers identify the LPC11U24FBD48/301 for embedded USB-control designs.
חלופות תחליף ישיר עבור LPC11U24FBD48/301 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
LPC11U24FBD48/401
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1114FBD48/301
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1114FBD48/323J
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1113FBD48/302
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1113FBD48/302,1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC11U24FBD48/301 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 KB |
| SRAM | Up to 10 KB |
| EEPROM | Up to 4 KB |
| Operating Voltage | 2.5 V to 3.3 V |
| USB Support | USB device |
| Serial Interface | USART |
| Architecture | 32-bit RISC |
| מארז | 48-LQFP (7x7 mm) |
| סוג הרכבה | Surface mount |
| Core Configuration | Cortex-M0, 50 MHz |
| Memory Architecture | 32K x 8 flash |
| Manufacturer Product Status | Active |
| Packaging | Tray |
מדריך תצורת פינים של LPC11U24FBD48/301 48-lqfp (7x7 mm)
תצורת פינים עבור LPC11U24FBD48/301 (מארזת 48-lqfp (7x7 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור LPC11U24FBD48/301.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LPC11U24FBD48/301 מתאים עבור 6 יישוםs: USB Data-Acquisition Module, Energy Metering Controller, Industrial Sensor Interface, USB Connected Test Instrument, Building Control Endpoint, Portable Embedded Accessory.
USB Data-Acquisition Module
The LPC11U24FBD48/301 fits a USB data-acquisition module because its ARM Cortex-M0 core operates at up to 50 MHz while 32 KB flash and up to 10 KB SRAM support local control, sampling logic, and configuration handling. The integrated USB device function removes the need for a separate USB controller in designs where the MCU can also manage sensors and buffering. A 3.3 V implementation must include suitable USB transceiver circuitry, controlled impedance routing, and the decoupling specified by NXP. The trade-off is limited memory compared with larger application processors, so firmware should use compact drivers and avoid unnecessary buffering.
מומלץ
Energy Metering Controller
The LPC11U24FBD48/301 is appropriate for an energy-metering controller where a low-cost 32-bit MCU must perform measurement control, data processing, and host communication. Its 50 MHz Cortex-M0 core provides deterministic handling for metering algorithms, while 32 KB flash stores application firmware and 4 KB of EEPROM can preserve configuration or calibration values. USART supports an external communications transceiver, and USB device support can simplify commissioning and data export. Designers should confirm ADC performance, timer resources, and low-power requirements in the datasheet before selecting the MCU.
מומלץ
Industrial Sensor Interface
The LPC11U24FBD48/301 can serve as the local controller in an industrial sensor interface by combining a 50 MHz ARM Cortex-M0 core with 32 KB flash, up to 10 KB SRAM, USB, and USART. This allows one device to read digital sensors, apply configuration, format measurements, and expose them through a wired host connection. The 48-LQFP 7x7 mm package supports compact boards, but it requires careful escape routing because its 0.5 mm lead pitch is narrower than many coarse-pitch packages. Galvanic isolation, surge protection, and industrial temperature requirements must be handled by the surrounding design.
מומלץ
USB Connected Test Instrument
For a USB-connected test instrument, the LPC11U24FBD48/301 provides the central processing and communication functions needed for a compact controller. The 50 MHz Cortex-M0 core can execute instrument control logic, 32 KB flash can hold firmware and calibration tables, and USB device support enables direct host connectivity. USART remains available for legacy peripherals or debug functions. The design should use a regulated 3.3 V rail, separate USB transceiver components, controlled USB trace geometry, and firmware-controlled reset and boot behavior. A higher-memory MCU is preferable when long waveform buffers or complex GUI-adjacent processing are required.
מומלץ
Building Control Endpoint
The LPC11U24FBD48/301 is suitable for a compact building-control endpoint that gathers sensor information and communicates with a host. Its 32 KB flash and up to 10 KB SRAM support protocol handling and application state, while USART can connect to a local bus or transceiver and USB provides a service connection. The MCU can supervise digital inputs, actuator commands, and configuration storage through its available peripherals. Design the interface for the voltage levels of the connected equipment, isolate external field wiring where required, and verify the exact peripheral assignment and pin multiplexing in the NXP datasheet.
מומלץ
Portable Embedded Accessory
The LPC11U24FBD48/301 can act as the control processor in a portable embedded accessory that connects to a host over USB. At 50 MHz, the Cortex-M0 core handles command parsing, configuration, status reporting, and basic sensor processing, while 32 KB flash and up to 10 KB SRAM provide room for compact embedded firmware. Its 48-LQFP package is compact enough for space-constrained boards, although a fine-pitch LQFP requires careful assembly and inspection. Battery designs must add the appropriate power regulation and should not assume that USB operation is available while the device is disconnected from its host.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LPC11U24FBD48/301 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LPC11U24FBD48/401 | LPC1114FBD48/301 | LPC1114FBD48/323J | LPC1113FBD48/302 | LPC1113FBD48/302,1 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP | 48-LQFP | 48-LQFP | 48-LQFP |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
מבדילים עיקריים
- Integrated USB device connectivity in a compact 48-LQFP microcontroller (לעומתLPC1114FBD48/301)
- 50 MHz processing rate with 32 KB flash (לעומתLPC1113FBD48/302)
- Integrated nonvolatile configuration memory (לעומתLPC1114FBD48/323J)
- Compact 7x7 mm surface-mount footprint with external pin access (לעומתLPC11U24FBD48/401)
הערות תכנון
Plan the LPC11U24FBD48/301 supply around the 2.5 V and 3.3 V operating options and the voltage requirements of the USB transceiver. Place the required bypass capacitors close to the relevant supply and ground pins, keep the USB transceiver on the same ground reference as the digital circuitry, and avoid long supply paths between the MCU and analog peripherals. Validate startup, reset behavior, and power consumption across the complete input voltage range before release.
The 48-LQFP package uses a fine-pitch land pattern that requires controlled PCB design and assembly. Follow the NXP footprint and solder-mask recommendations exactly, confirm the lead pitch and courtyard dimensions against the package drawing, and route high-speed or sensitive USB signals over a continuous reference plane. Provide unobstructed access for inspection and rework, and pay particular attention to exposed USB differential-pair geometry and nearby clock or switching nodes.
Do not treat a 48-pin package match as proof of MCU interchangeability. Before replacing the LPC11U24FBD48/301, verify every power pin, ground pin, USB signal, peripheral mapping, boot configuration, memory map, and ROM-code dependency. The LPC1114 variants have different device configurations, and NXP community guidance specifically identifies ROM-code differences between interchangeable LPC1114 suffixes. A full firmware and hardware regression is required after any substitution.
Keep USB differential routing short, symmetric, and continuously referenced to a solid ground plane. Keep the USB transceiver, its passive components, and the MCU interface pins in the same signal region, and avoid splitting the reference plane beneath the pair. Apply the USB electrical requirements from the applicable USB specification and transceiver documentation during schematic and layout review. Place ESD protection close to the connector while preserving the required return path.
מידע על תאימות
The verified manufacturer product information identifies the LPC11U24FBD48 family as active but does not explicitly state the exact LPC11U24FBD48/301 environmental compliance declarations. Obtain current NXP documentation for the exact ordering code before making a compliance determination.