LTC3372EUH#TRPBF - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
MPN: LTC3372EUH#TRPBF ✓ פעילLTC3372EUH#TRPBF סקירה
A PMIC (Power Management Integrated Circuit) is a highly integrated device that consolidates multiple power conversion and management functions into a single chip, such as DC/DC converters, LDOs, and battery chargers. The LTC3372 belongs to the class of multioutput switching regulators, which are essential in systems requiring multiple voltage rails from a single input supply, such as industrial, automotive, and communications equipment. By integrating a high-voltage controller and configurable low-voltage bucks, it reduces board space and component count compared to discrete solutions.
Key features include a 60V input capability for the HV controller, low quiescent current (Low IQ) for improved efficiency at light loads, and pin-programmable configurations (C1-C3 pins) that allow the four LV bucks to be assigned to one of eight power configurations. The switching frequency is programmable via an external resistor, enabling optimization between efficiency and component size. The device also includes soft-start, overcurrent protection, and thermal shutdown.
Technically, the LTC3372 uses a current-mode control architecture for fast transient response and stable operation. The HV controller can drive external N-channel MOSFETs, allowing high-current, high-voltage step-down conversion. The LV bucks integrate their power switches, simplifying design and reducing external component count. The pin-strapping configuration provides design flexibility without requiring I2C or SPI communication, making it suitable for standalone applications.
Typical applications include industrial power supplies, automotive infotainment and ADAS systems, telecom and networking equipment, and distributed power architectures. The wide input voltage range and configurable outputs make it ideal for systems that need multiple regulated rails from a 12V or 24V bus.
When designing with the LTC3372, ensure proper PCB layout with adequate ground planes and decoupling capacitors for both the HV controller and LV bucks. The switching frequency should be chosen to balance efficiency and component size, and the inductor values must be selected according to the datasheet guidelines to avoid saturation.
חלופות תחליף ישיר עבור LTC3372EUH#TRPBF — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LTC3372EUH#TRPBF (אותו גורם צורה וטביעת רגל) — שונים ב Package, Synchronous Rectification.
LTC3372EUK#TRPBF
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LTC3372HUK#TRPBF
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LTC3372EUK#PBF
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LTC3370
⚡ אותה מארזה ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
LTC3371
⚡ אותה מארזה ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
TPS65270
⚡ אותה מארזה ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
LTC3372EUH#TRPBF דירוגים מרביים ומאפיינים חשמליים
| Input Voltage Range (HV Controller) | 4.5V to 60V |
| Number of LV Buck Regulators | 4 |
| Total LV Buck Output Current | 8A (configurable as 8x1A, 4x2A, 2x4A, etc.) |
| LV Buck Input Voltage Range | 2.25V to 5.5V |
| Output Voltage Range (LV Bucks) | 0.8V to VIN |
| Switching Frequency Range | 1MHz to 3MHz (programmable via external resistor) |
| טמפרטורת צומת פעולה | -40°C to 125°C (E-grade: 0°C to 85°C) |
| מארז | 48-QFN (7x7mm) |
| סוג הרכבה | Surface Mount |
| מספר פינים | 48 |
| Control Architecture | Current Mode |
| יישור סינכרוני | Yes (all N-channel) |
| סטטוס RoHS | Compliant |
תצורת פינים של LTC3372EUH#TRPBF
| פין 1 | VIN_HV — High-voltage input for the buck controller |
| פין 2 | SW_HV — Switch node for the high-voltage controller |
| פין 3 | BOOST_HV — Bootstrap pin for high-side FET driver |
| פין 4 | GND — Ground |
| פין 5 | VIN_LV1 — Input for LV buck 1 |
| פין 6 | SW1 — Switch node for LV buck 1 |
| פין 7 | VOUT1 — Output sense for LV buck 1 |
| פין 8 | GND — Ground |
| פין 9 | VIN_LV2 — Input for LV buck 2 |
| פין 10 | SW2 — Switch node for LV buck 2 |
| פין 11 | VOUT2 — Output sense for LV buck 2 |
| פין 12 | GND — Ground |
| פין 13 | VIN_LV3 — Input for LV buck 3 |
| פין 14 | SW3 — Switch node for LV buck 3 |
| פין 15 | VOUT3 — Output sense for LV buck 3 |
| פין 16 | GND — Ground |
| פין 17 | VIN_LV4 — Input for LV buck 4 |
| פין 18 | SW4 — Switch node for LV buck 4 |
| פין 19 | VOUT4 — Output sense for LV buck 4 |
| פין 20 | GND — Ground |
| פין 21 | C1 — Configuration pin 1 |
| פין 22 | C2 — Configuration pin 2 |
| פין 23 | C3 — Configuration pin 3 |
| פין 24 | RT — Switching frequency programming pin |
| פין 25 | SS — Soft-start programming pin |
| פין 26 | EN_HV — Enable for HV controller |
| פין 27 | EN_LV — Enable for LV bucks |
| פין 28 | PGOOD — Power good indicator |
| פין 29 | VCC — Internal supply voltage |
| פין 30 | GND — Ground |
| פין 31 | EXTVCC — External supply for gate drivers |
| פין 32 | GND — Ground |
| פין 33 | NC — No connect |
| פין 34 | NC — No connect |
| פין 35 | NC — No connect |
| פין 36 | NC — No connect |
| פין 37 | NC — No connect |
| פין 38 | NC — No connect |
| פין 39 | NC — No connect |
| פין 40 | NC — No connect |
| פין 41 | NC — No connect |
| פין 42 | NC — No connect |
| פין 43 | NC — No connect |
| פין 44 | NC — No connect |
| פין 45 | NC — No connect |
| פין 46 | NC — No connect |
| פין 47 | NC — No connect |
| פין 48 | NC — No connect |
יישומים טיפוסיים
LTC3372EUH#TRPBF מתאים עבור 6 יישוםs: Industrial Power Supplies, Automotive Infotainment and ADAS, Telecom and Networking Equipment, Distributed Power Architectures, Medical Equipment, Portable and Battery-Powered Devices.
Industrial Power Supplies
The LTC3372EUH#TRPBF is ideal for industrial power supplies that require multiple regulated rails from a 24V or 48V bus. Its HV controller handles up to 60V input, while the four LV bucks provide configurable outputs for logic, analog, and I/O rails. The wide input range and low quiescent current ensure efficient operation across varying load conditions, making it suitable for factory automation, process control, and test equipment.
מומלץ
Automotive Infotainment and ADAS
In automotive systems, the LTC3372EUH#TRPBF provides a compact solution for powering infotainment processors, ADAS sensors, and communication modules. Its 60V input capability handles load dumps and transients, while the configurable LV bucks supply core, I/O, and memory voltages. The -40°C to 125°C operating range meets automotive requirements, and the low IQ improves efficiency during standby modes.
מומלץ
Telecom and Networking Equipment
The LTC3372EUH#TRPBF is well-suited for telecom and networking equipment that requires multiple voltage rails from a 48V backplane. The HV controller steps down 48V to an intermediate bus, while the LV bucks generate 3.3V, 2.5V, 1.8V, and 1.0V rails for FPGAs, ASICs, and transceivers. The programmable switching frequency allows optimization for EMI and efficiency, critical in dense networking environments.
מומלץ
Distributed Power Architectures
The LTC3372EUH#TRPBF excels in distributed power architectures where a high-voltage bus is converted to multiple point-of-load rails. Its HV controller can drive external MOSFETs for high-current intermediate bus conversion, while the integrated LV bucks provide precise regulation for sensitive loads. The pin-configurable outputs eliminate the need for digital communication, simplifying design and reducing cost.
מומלץ
Medical Equipment
In medical equipment, the LTC3372EUH#TRPBF provides reliable multi-rail power for imaging systems, patient monitors, and diagnostic devices. Its wide input range accommodates various power sources, and the low noise operation is critical for sensitive analog circuits. The compact 48-QFN package saves board space, and the configurable outputs allow flexibility in system design.
מומלץ
Portable and Battery-Powered Devices
The LTC3372EUH#TRPBF can be used in portable devices that require multiple voltage rails from a battery. Its low quiescent current extends battery life, and the configurable LV bucks can be optimized for different load requirements. The wide input range allows operation from various battery chemistries, and the small package is suitable for space-constrained designs.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LTC3372EUH#TRPBF — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LTC3372EUK#TRPBF | LTC3372HUK#TRPBF | LTC3372EUK#PBF |
|---|---|---|---|---|
| Package | 48-QFN (7x7mm) | 48-QFN (7x7mm) | 48-QFN (7x7mm) | 48-QFN (7x7mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Input Voltage Range (HV) | 4.5V to 60V | 4.5V to 60V | 4.5V to 60V | 4.5V to 60V |
| Total LV Buck Output Current | 8A | 8A | 8A | 8A |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C | -40°C to 150°C | -40°C to 125°C |
| Switching Frequency | 1MHz to 3MHz | 1MHz to 3MHz | 1MHz to 3MHz | 1MHz to 3MHz |
| Packaging | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
מבדילים עיקריים
- Integrated high-voltage buck controller (לעומתLTC3370)
- Wide input voltage range up to 60V (לעומתTPS65270)
- Pin-configurable output currents (לעומתLTC3371)
הערות תכנון
For the LTC3372EUH#TRPBF, ensure a solid ground plane under the 48-QFN package and place decoupling capacitors close to each VIN pin. The HV controller's switch node (SW_HV) should have a short, wide trace to minimize parasitic inductance. Use a 4-layer PCB with dedicated power and ground planes for optimal performance.
The 48-QFN package has an exposed pad that must be soldered to a thermal via array to dissipate heat effectively. The power dissipation depends on the total output current and voltage drop. For high-current configurations (e.g., 8A total), ensure adequate copper area and airflow to keep the junction temperature below 125°C.
Do not exceed the absolute maximum ratings for VIN_HV (60V) and VIN_LV (5.5V). The C1-C3 configuration pins must be tied to the correct logic levels to avoid unintended output configurations. Also, select the RT resistor carefully to set the switching frequency within the 1MHz to 3MHz range to avoid instability.
מידע על תאימות
RoHS compliant per Analog Devices product page. AEC-Q100 qualification not specified for this variant; consider H-grade for automotive.
