M2GL005-1TQ144 - 6060-LE 1.2V IGLOO2 FPGA | Microchip
MPN: M2GL005-1TQ144 ✓ פעילM2GL005-1TQ144 סקירה
An FPGA is a reconfigurable digital semiconductor that can be programmed after fabrication to implement logic, state machines, interface controllers, and signal-processing functions. The IGLOO2 family belongs to the broader low-density programmable-logic hierarchy and combines FPGA fabric, programmable I/O, embedded RAM, and configuration resources in one device. This makes the M2GL005-1TQ144 useful where a microcontroller or discrete logic would require extensive firmware and supporting circuitry.
Key device attributes include 6,060 logic cells, 719,872 total RAM bits, and 84 I/O pins in a 144-TQFP package. The 1.2 V operating voltage supports modern low-energy digital systems, while the large pin count provides broad connectivity to external memory, sensors, communications devices, and mixed-signal components. Microchip lists the M2GL005 family as in production, supporting its use as the foundation of general-purpose programmable-logic platforms.
The IGLOO2 architecture supports parallel programmable logic and reusable on-chip RAM, allowing designers to implement datapath logic, protocol adapters, control logic, and fixed-function subsystems without relying on an external processor. The 84 available I/O pins make the 144-TQFP option particularly useful where multiple buses or mixed signal interfaces must connect directly to the FPGA. Its 20 mm by 20 mm surface-mount package also avoids the mechanical complexity of larger ball-grid-array FPGA packages.
Typical uses include industrial control and factory automation, communications infrastructure, embedded system management, I/O expansion, and secure connectivity. The device can bridge dissimilar interfaces, translate protocols, consolidate control functions, or implement parallel data acquisition logic. Its large I/O count is especially useful for systems requiring multiple chip-select, address, control, and serial signals without adding another external bus controller.
PCB design should follow Microchip's package and power-supply recommendations, including short, properly decoupled core and I/O supply connections and careful assignment of sensitive pins. Because the complete numbered pin map is not published in the accessible product results, use the manufacturer package drawing and pin-description table before assigning tracks, power rails, or programming signals.
This page combines the exact M2GL005-1TQ144 device specifications, lifecycle information, same-package alternatives, comparison criteria, and practical selection guidance to support FPGA sourcing and design decisions.
חלופות תחליף ישיר עבור M2GL005-1TQ144 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם M2GL005-1TQ144 (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Logic Elements, Package.
M2GL005-1TQG144
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
M2GL005-TQG144I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
M2GL005-TQ144
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←M2GL005S-1TQ144
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
M2GL005S-TQ144
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
M2GL005-1TQ144 דירוגים מרביים ומאפיינים חשמליים
| Device Type | IGLOO2 low-density FPGA |
| Logic Elements | 6,060 LE |
| Total RAM | 719,872 bits |
| Core Operating Voltage | 1.2 V |
| User I/O Pins | 84 pins |
| מארז | 144-pin TQFP |
| Package Dimensions | 20 mm x 20 mm |
| סוג הרכבה | Surface mount |
| FPGA Family | IGLOO2 |
| Device Density | Low density |
| Programmable Logic | 6,060 logic cells |
| On-Chip Memory | 719,872 RAM bits |
| Programmability | User-programmable FPGA |
| סטטוס מחזור חיים | In production |
מדריך תצורת פינים של M2GL005-1TQ144 20 mm x 20 mm
תצורת פינים עבור M2GL005-1TQ144 (מארזת 20 mm x 20 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור M2GL005-1TQ144.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
M2GL005-1TQ144 מתאים עבור 6 יישוםs: Industrial Control Logic, Communications Interface Bridging, System Management and I/O Expansion, Secure Connectivity Gateways, Data Acquisition and Signal Conditioning, LED Lighting and Display Control.
Industrial Control Logic
The M2GL005-1TQ144 fits industrial control modules that need deterministic programmable logic alongside a host microcontroller. Its 6,060 logic elements can implement state machines, interlocks, sequencing logic, counters, and timing functions, while the 719,872 RAM bits support local buffers and protocol-specific data handling. The 84 user I/O pins provide substantial connectivity to sensors, actuators, optocouplers, and discrete logic. Operating the FPGA core from 1.2 V fits low-voltage control architectures, while the 20 mm by 20 mm 144-TQFP package remains practical for compact industrial boards. The principal design consideration is validating power sequencing and every configuration, clock, and I/O connection against Microchip's package documentation before fabrication.
מומלץ
Communications Interface Bridging
The M2GL005-1TQ144 can bridge dissimilar communication interfaces by translating parallel or serial data streams in parallel programmable logic. The 6,060 logic cells are suitable for protocol state machines, FIFOs, framing logic, and clock-domain interfaces, while 84 I/O pins allow direct connection to multiple buses and transceivers. Its 719,872 RAM bits can support packet buffering and temporary data storage. The 1.2 V core operation can simplify integration with low-voltage digital circuitry. In a communications design, engineers should use the manufacturer's recommended I/O standards and pin constraints, account for transceiver enable timing, and validate signal integrity at the selected interface speed before treating the FPGA as a drop-in bridge solution.
מומלץ
System Management and I/O Expansion
The M2GL005-1TQ144 is suitable for system-management blocks that consolidate monitoring, reset, power sequencing, interrupt routing, and I/O decoding. Its 84 user I/O pins provide ample connections for status inputs, control outputs, and multiplexed buses without requiring a large programmable-logic package. The device's 6,060 logic elements can implement independent monitoring channels and control sequences, while its RAM can hold thresholds, counters, and diagnostic records. In an embedded system, the FPGA can operate as a companion to a microcontroller or processor and reduce backplane pin pressure. Designers should define ownership of boot, configuration, watchdog, and reset signals carefully, and check all package pins in the Microchip ordering guide before assigning board functions.
מומלץ
Secure Connectivity Gateways
The M2GL005-1TQ144 can implement programmable front-end logic in secure gateways, including protocol framing, access-control state machines, data screening, and secure-connectivity management. The 6,060 logic elements and 719,872 RAM bits provide enough fabric for parallel datapath and buffering tasks, while 84 I/O pins support connections among network interfaces, storage, and security peripherals. Microchip identifies secure connectivity as an IGLOO2 application, and the M2GL005S family extends that concept with user-programmable flash for designs that benefit from on-device nonvolatile storage. For a secure product, lock down unused configuration and I/O paths, separate sensitive signals from noisy interfaces, and validate the exact configuration-memory and programming workflow required by the selected ordering code.
מומלץ
Data Acquisition and Signal Conditioning
The M2GL005-1TQ144 can be used as a digital acquisition and conditioning engine when parallel sensors, converters, or switching networks require deterministic control. Its 6,060 logic elements can combine sampling control, threshold logic, digital filters, counters, and event sequencing, while the on-chip RAM supports temporary acquisition buffers. With 84 user I/O pins, the FPGA can connect multiple parallel data groups without requiring a very large package. The 1.2 V core reduces the logic supply level, although external interface levels still require appropriate I/O configuration. Signal-integrity planning should include controlled clock distribution, separated sensitive and noisy nets, and datasheet-compliant input and output constraints. Validate acquisition timing and threshold performance at system level rather than inferring it from the logic-cell count alone.
מומלץ
LED Lighting and Display Control
The M2GL005-1TQ144 can drive coordinated LED arrays, signs, indicators, and display-control subsystems where many outputs require timing, pattern generation, and fault monitoring. Its 84 user I/O pins allow many discrete channels to be distributed without loading a host processor, and the 6,060 logic elements can implement refresh timing, dimming patterns, animation, and diagnostic behavior. The 719,872 RAM bits can hold frame or pattern information. The 1.2 V FPGA core is compatible with efficient downstream driver architectures, although LED current, polarity, and switching requirements must be handled by suitable external circuitry. Design the ground and return-current paths carefully to prevent LED-driver transients from disturbing logic supplies, and verify all timing constraints against the selected I/O standards.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור M2GL005-1TQ144 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | M2GL005-1TQG144 | M2GL005-TQG144I | M2GL005-TQ144 | M2GL005S-1TQ144 | M2GL005S-TQ144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-TQFP | 144-TQFP | 144-TQFP | 144-TQFP | 144-TQFP | 144-TQFP |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 6,060 LE | 6,060 LE | 6,060 LE | 6,060 LE | 6,060 LE | 6,060 LE |
| User-Programmable Flash | No | No | No | No | Yes | Yes |
| Ordering Grade | -1TQ144 | -1TQG144 | -TQG144I | -TQ144 | S-1TQ144 | S-TQ144 |
מבדילים עיקריים
- Standard 6K IGLOO2 configuration without embedded user flash (לעומתM2GL005S-1TQ144)
- Close ordering variant with the same -1 speed designation (לעומתM2GL005-1TQG144)
- Industrial ordering designation available in the same footprint (לעומתM2GL005-TQG144I)
- Broad user-I/O availability for system integration (לעומתM2GL005-TQ144)
הערות תכנון
Route the 1.2 V core supply and all required I/O supplies exactly as specified by Microchip's IGLOO2 power guidelines. Place the recommended decoupling capacitors at their associated supply pins, with short ground returns and a quiet distribution path between the regulator and FPGA. Review the datasheet for voltage tolerance, supply sequencing, and whether unused I/O rails must remain connected before releasing the PCB layout.
Use the official 144-TQFP land pattern and pin-description table rather than a generic TQFP footprint. The 144-TQFP package is 20 mm by 20 mm and contains 84 user I/O pins in addition to power, ground, and configuration functions. Confirm every pin in the design tool, preserve the manufacturer's pin-1 orientation, and check drill, courtyard, and paste specifications against the current package drawing.
Assign clocks, configuration signals, and high-speed I/O according to the manufacturer's pin recommendations. Keep clock traces short and away from noisy switching nets, provide a continuous ground reference under routed signals, and use matched termination or series damping when the selected I/O standard requires it. Verify timing with an appropriate constraint file rather than relying only on the nominal 1.2 V operating point.
Do not approve a same-package substitute solely from the 144-TQFP label. Compare the full ordering suffix, speed grade, temperature grade, device family, embedded-memory configuration, and user-flash requirements. The M2GL005S variants add user-programmable flash, while other M2GL005 suffixes differ in grade notation; confirm the exact ordering guide and datasheet limits before substituting the part.
מידע על תאימות
Compliance information for the exact M2GL005-1TQ144 ordering code was not explicitly stated in the accessible product results. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in Microchip's current product documentation before production release.
