Analog Devices

MAX3232ECSE+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232ECSE+T ✓ פעיל
3.0 V to 5.5 V Vdss Down to 10 nA Id 16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MAX3232ECSE+T סקירה

Analog Devices MAX3232ECSE+T is a dual-driver, dual-receiver RS-232 transceiver rated for data rates up to 1 Mbps, operation from 3.0 V to 5.5 V, and ±15 kV ESD protection in a 16-pin SOIC package. The device includes an integrated dual charge-pump circuit that converts the low-voltage supply into the positive and negative voltages required by true RS-232 drivers. Its low-power design supports modern 3.3 V and 5 V serial systems while maintaining compatibility with conventional RS-232 port levels.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into balanced, bipolar RS-232 signals and converts received RS-232 signals back into CMOS-compatible levels. It occupies the interface-IC branch of the broader semiconductor hierarchy, combining line drivers, line receivers, voltage conversion, and electrostatic-discharge protection into a complete serial-port interface. Two transmit channels and two receive channels make the MAX3232 family suitable for bidirectional serial links requiring full-duplex communication.

Principal features include a maximum data rate of 1 Mbps, a 3.0 V to 5.5 V supply range, ±15 kV ESD protection, and a supply current reduction capability down to 10 nA. The 16-pin SOIC package is widely supported by PCB assembly and prototyping processes. Its 16-pin footprint simplifies replacement of non-enhanced RS-232 transceivers, although the electrical requirements of the connected logic and cable must still be reviewed before substitution.

Internally, the MAX3232ECSE+T uses a dual charge-pump voltage converter to generate the positive supply used by one driver and the negative supply used by the other. Four external 0.1 µF charge-pump capacitors support the conversion circuit, while receiver and driver stages perform the signal-level conversion. This architecture avoids a separate external DC-to-DC converter but requires correct capacitor selection, placement, and the correct supply bypass arrangement for stable operation.

Typical uses include industrial serial consoles, point-of-sale terminals, test equipment, data acquisition systems, embedded control boards, and legacy peripheral connections. The MAX3232ECSE+T is especially appropriate where a 3.3 V controller must communicate with an RS-232 device over a cable while retaining true RS-232 electrical levels. Its 1 Mbps maximum data rate supports substantially faster communication than many low-rate legacy transceivers.

For layout, place the charge-pump capacitors and supply bypass capacitor close to their associated pins, and keep the RS-232 driver outputs away from sensitive low-level inputs. Confirm that the host UART operates at the logic levels expected by the transceiver and verify cable length, grounding, and connector exposure against the required system ESD and EMC conditions.

חלופות תחליף ישיר עבור MAX3232ECSE+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3232ECSE+T (אותו גורם צורה וטביעת רגל) — שונים ב Maximum Data Rate, Package, Product Type, Supply Voltage Range, Interface Standard.

Maxim Integrated
Maximum Data Rate: Up to 1Mbps
Package: 16-SOIC narrow
Supply Voltage Range: 3.0V to 5.5V
השווה עם MAX3232ECSE+T →
Maxim Integrated
Maximum Data Rate: 1 Mbps
Package: 16-pin SOIC
Product Type: RS-232 transceiver
השווה עם MAX3232ECSE+T →
Analog Devices
Maximum Data Rate: 1Mbps
Product Type: Dual RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
השווה עם MAX3232ECSE+T →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Interface Standard: RS-232
השווה עם MAX3232ECSE+T →
Maxim Integrated
Maximum Data Rate: 1Mbps
Package: 16-SOIC
Product Type: RS-232 line driver and receiver transceiver
השווה עם MAX3232ECSE+T →

MAX3232ESE+

✅ Drop-In
Analog Devices
📦 SOIC-16
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232CSE+

✅ Drop-In
Maxim Integrated
📦 SOIC-16
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · Up to 1Mbps · True RS-232 · RS-232, CMOS · Low-power

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232CSE-T

✅ Drop-In
📦 SOIC-16
Same MAX3232 core and 16-pin footprint; non-enhanced ESD protection is 10 kV versus 15 kV, a 5 kV or 33% reduction.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3232ICSE

✅ Drop-In
Maxim Integrated
📦 SOIC-16
RS-232 line driver and receiver transceiver · 1 transmitter and 1 receiver · 3.0V to 5.5V · 1Mbps · 16-SOIC · Surface mount · RS-232 driver and receiver · Dual charge pump

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232ECWE+

✅ Drop-In
Maxim Integrated
📦 SOIC-16
RS-232 transceiver · 2 · 2 · Full-duplex · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232EEWE+

✅ Drop-In
Analog Devices
📦 SOIC-16
Dual RS-232 transceiver · 3.0V to 5.5V · 1Mbps · 2 · 2 · Full duplex · ±15kV · Down to 10nA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232ECSE+T מפרטים

Product Type RS-232 transceiver
Transmitter Channels 2
Receiver Channels 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Supply Current Down to 10 nA
Charge-Pump Circuit Dual
External Charge-Pump Capacitors 4 × 0.1 µF
מארז 16-pin SOIC
סוג הרכבה Surface mount
Interface Standard True RS-232

תצורת פינים של MAX3232ECSE+T

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
פין 1 C1+ — Charge-pump capacitor terminal
פין 2 C1- — Charge-pump capacitor terminal
פין 3 C2+ — Charge-pump capacitor terminal
פין 4 C2- — Charge-pump capacitor terminal
פין 5 V+ — Positive charge-pump output
פין 6 R1OUT — Receiver 1 logic output
פין 7 R2OUT — Receiver 2 logic output
פין 8 R2IN — Receiver 2 RS-232 input
פין 9 R1IN — Receiver 1 RS-232 input
פין 10 T2IN — Driver 2 logic input
פין 11 T1IN — Driver 1 logic input
פין 12 T2OUT — Driver 2 RS-232 output
פין 13 T1OUT — Driver 1 RS-232 output
פין 14 GND — Ground
פין 15 VCC — Positive supply input
פין 16 V- — Negative charge-pump output

יישומים טיפוסיים

MAX3232ECSE+T מתאים עבור 6 יישוםs: Industrial Serial Console, Point-of-Sale Terminal, Data Acquisition System, Embedded Test Instrument, Legacy Peripheral Gateway, Security and Access Controller.

🏭

Industrial Serial Console

The MAX3232ECSE+T suits a 3.3 V industrial controller that must communicate through a conventional RS-232 console. Its 3.0 V to 5.5 V supply range permits direct operation from common embedded rails, while two drivers and two receivers support full-duplex links. The ±15 kV ESD rating adds protection at a connector that may be touched during installation or maintenance. Place the four 0.1 µF charge-pump capacitors close to the transceiver and route the two driver outputs away from sensitive receiver traces. The 1 Mbps capability gives substantial throughput headroom, although the UART configuration and cable limitations must also be considered.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal can use the MAX3232ECSE+T to bridge a low-voltage UART processor to a legacy RS-232 peripheral. The integrated dual charge pump generates the positive and negative driver voltages without a separate external inverter, while the 3.0 V to 5.5 V range supports both 3.3 V and 5 V system rails. Two transmit and two receive channels allow more than one full-duplex serial function in a compact board area. The 1 Mbps maximum rate supports rapid receipt or peripheral data transfer, but software buffering and peripheral timing may impose lower practical throughput.

🧩

Data Acquisition System

The MAX3232ECSE+T is useful when a data-acquisition controller uses a UART interface but must exchange data with an RS-232 instrument. Its true RS-232 output levels support conventional cable-based equipment, and the 1 Mbps specification accommodates fast measurement and control traffic. The dual-transmit, dual-receive arrangement can handle command and response paths without adding another transceiver package. Keep the charge-pump loop compact, provide local supply bypassing, and separate driver return currents from analog sensor circuitry to prevent ground-bounce errors in precision measurements.

🔧

Embedded Test Instrument

The MAX3232ECSE+T can provide a service-port connection between a 3.3 V embedded instrument and a technician’s RS-232 terminal. Its 16-pin SOIC package is straightforward to assemble on a dense mixed-signal board, and the ±15 kV ESD protection strengthens the interface where the cable may be connected repeatedly. The 1 Mbps rate supports firmware download, diagnostic logs, and configuration transfer. Firmware should implement suitable framing and error recovery because the RS-232 link does not provide its own protocol, while the PCB should minimize the area enclosed by charge-pump current loops.

🔌

Legacy Peripheral Gateway

A gateway based on a modern microcontroller can use the MAX3232ECSE+T to preserve compatibility with legacy RS-232 printers, scanners, or service equipment. Operation from 3.0 V to 5.5 V makes the interface suitable for both 3.3 V and 5 V controller platforms, while two transmitters and two receivers reduce the number of required interface packages. The 1 Mbps capability is well above many legacy peripheral rates. Validate the peripheral’s voltage levels, handshake requirements, connector wiring, and cable shielding because software timing and electrical protection outside the IC remain system responsibilities.

🎥

Security and Access Controller

The MAX3232ECSE+T can support configuration and diagnostic connections in an access-control or security system where an RS-232 service port is required. Its ±15 kV ESD protection is valuable on exposed equipment ports, while the 3.0 V to 5.5 V operating range allows use beside common low-voltage processors. The 16-pin SOIC footprint reduces board area and supports automated assembly. Designers should use a controlled connector or enclosure, provide chassis or signal grounding appropriate to the installation, and avoid routing the high-current charge-pump return through sensitive security-monitoring circuitry.

What are the key specifications of MAX3232ECSE+T that engineers should know?
The MAX3232ECSE+T is a dual-driver, dual-receiver true RS-232 transceiver with a 3.0 V to 5.5 V supply range, data rates up to 1 Mbps, and ±15 kV ESD protection. According to the Analog Devices MAX3232 product page and MAX3232 data sheet, it uses a dual charge pump with four external 0.1 µF capacitors. The device is packaged in a 16-pin SOIC for surface-mount assembly.
Where can I download the MAX3232ECSE+T datasheet PDF?
The MAX3232ECSE+T datasheet and product information are available from the official Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The manufacturer describes the MAX3232 family as production devices covering 3.0 V to 5.5 V operation, low-power operation, data rates up to 1 Mbps, and true RS-232 transceiver functions.
Where can I find the MAX3232ECSE+T pinout?
Use the pin-description table in the Analog Devices MAX3232 data sheet for the complete 16-pin SOIC assignment. The MAX3232ECSE+T follows the standard MAX3232 arrangement, including charge-pump capacitor pins, receiver inputs and outputs, driver inputs and outputs, supply, and ground. Verify pin orientation against the PCB footprint before assigning nets or assembling the board.
What is the operating voltage of MAX3232ECSE+T?
The MAX3232ECSE+T operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232 product-page summary, the family supports both 3.0 V and 5.5 V supply boundaries and includes a low-power design. This range allows use with 3.3 V UARTs and conventional 5 V logic systems.
How fast can MAX3232ECSE+T transmit RS-232 data?
The MAX3232ECSE+T supports data rates up to 1 Mbps. According to the official MAX3232 product-page description, it is a true RS-232 transceiver operating from 3.0 V to 5.5 V at rates up to 1 Mbps. Actual application throughput also depends on UART timing, cable characteristics, grounding, and the performance of the connected equipment.
What ESD protection does MAX3232ECSE+T provide?
The MAX3232ECSE+T provides ±15 kV ESD protection. The Analog Devices MAX3232E product-page summary identifies the enhanced MAX3232E family as having two drivers, two receivers, a dual charge pump, and ±15 kV IEC ESD protection on the serial connection pins. The complete system still needs suitable enclosure, grounding, and connector-level protection.
Where to buy MAX3232ECSE+T online and what is its current lead time?
Use the Request a Quote form on this page to request MAX3232ECSE+T availability, current lead time, and a firm quotation. The manufacturer lists the MAX3232 family as production, and distributor listings identify the exact MAX3232ECSE+T ordering code as a 16-SOIC RS-232 transceiver. Current stocking and lead time should be confirmed through the quotation process.
What is the price of MAX3232ECSE+T?
Use the Request a Quote form on this page for the current MAX3232ECSE+T price. The structured pricing area updates commercial conditions without embedding a potentially stale figure in technical guidance. The quotation should identify the exact MAX3232ECSE+T suffix, 16-pin SOIC package, quantity, and delivery requirements.
Is MAX3232ECSE+T in stock?
Request current MAX3232ECSE+T stock status through the Request a Quote form on this page. Inventory can vary by package suffix, manufacturing lot, and order quantity, so the exact MAX3232ECSE+T ordering code should be included in the request. The official manufacturer listing indicates that the MAX3232 family remains in production.
MAX3232ECSE+T vs MAX3232ESE+ - which is better for a 3.3 V RS-232 port?
Both parts support 3.0 V to 5.5 V operation and true RS-232 communication, but the MAX3232ECSE+T designation includes the enhanced commercial-temperature ordering option. The MAX3232ESE+ is the non-enhanced suffix variant identified in published comparisons. For a new 3.3 V design, confirm the required temperature grade and exact ESD rating before treating either ordering code as interchangeable.
When should I choose MAX3232ECSE+T over MAX3232CSE+?
Choose the MAX3232ECSE+T when the application requires the enhanced ±15 kV ESD-protected interface and the specified operating-temperature option. The MAX3232CSE+ belongs to the non-enhanced MAX3232 family and is commonly associated with a lower 10 kV ESD rating. For a standard commercial industrial control link, the enhanced part provides additional protection margin without changing the 16-pin SOIC footprint.
Is MAX3232ECSE+T suitable for industrial serial-console designs?
The MAX3232ECSE+T is suitable for many 3.3 V or 5 V industrial serial-console designs because it combines true RS-232 levels, two transmitters, two receivers, 1 Mbps operation, and ±15 kV ESD protection. Its 16-pin SOIC package supports established surface-mount layouts. Validate the temperature range, isolation requirement, connector grounding, and industrial EMC conditions for the finished equipment.
What can replace MAX3232ECSE+T?
The closest replacements are MAX3232 variants that retain the 16-pin SOIC footprint, 3.0 V to 5.5 V operation, and two-driver/two-receiver arrangement. Published cross-reference information identifies MAX3232CSE-T and MAX3232ESE+ as relevant family candidates. Verify ESD rating, temperature grade, charge-pump capacitor values, and driver/receiver pin assignments before releasing a substitution.
What is the best Analog Devices equivalent for MAX3232ECSE+T?
The most direct Analog Devices alternatives are MAX3232ESE+, MAX3232CSE+, MAX3232ICSE, MAX3232ECWE+, and MAX3232EEWE+, provided each selected ordering suffix has the required temperature grade and the same 16-pin SOIC footprint. The MAX3232 family shares the core transceiver architecture, but ESD level, temperature grade, and tape-and-reel suffix must be compared before replacement.
How should MAX3232ECSE+T charge-pump capacitors be placed?
Place the four 0.1 µF charge-pump capacitors close to their designated MAX3232ECSE+T pins, and place the supply bypass capacitor near the supply and ground connections. Keep these high-current charge-pump loops compact and away from sensitive receiver inputs. The MAX3232 data sheet specifies four 0.1 µF capacitors; use capacitor characteristics suitable for the voltage and temperature conditions of the application.

נתוני עזר הנדסיים עבור MAX3232ECSE+T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MAX3232ECSE+T for a 3.3 V or 5 V system requiring two true RS-232 drivers, two receivers, operation up to 1 Mbps, and ±15 kV ESD protection in a standard 16-pin SOIC footprint. Choose the MAX3232ESE+ when its ordering grade meets the application and the exact electrical requirements match, but it does not add a distinct ESD advantage over the enhanced target. Choose the MAX3232CSE+ or MAX3232CSE-T when a non-enhanced 10 kV interface is acceptable and the system does not need the target’s enhanced protection. Choose the MAX3232ICSE for designs requiring the industrial-temperature ordering option. MAX3232ECWE+ and MAX3232EEWE+ remain useful same-footprint family choices when their temperature suffix is the preferred grade. Always verify the manufacturer ordering table before releasing a drop-in substitution.

השוואה עם חלופות

פרמטר מוצר זה MAX3232ESE+ MAX3232CSE+ MAX3232CSE-T MAX3232ICSE MAX3232ECWE+ MAX3232EEWE+
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver Dual-driver, dual-receiver RS-232 transceiver
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps
ESD Protection ±15 kV ±15 kV 10 kV 10 kV ±15 kV ±15 kV ±15 kV
Charge-Pump Architecture Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump
Transmitter Channels 2 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2 2

מבדילים עיקריים

  • Enhanced ESD protection (לעומתMAX3232CSE+)
  • 1 Mbps dual-channel RS-232 interface (לעומתMAX3232CSE-T)
  • Compact 16-pin SOIC implementation (לעומתMAX3232EETE+T)

הערות תכנון

Place the four 0.1 µF charge-pump capacitors directly between the designated C1+, C1−, C2+, and C2− pins, with the shortest possible traces. Keep the high-current switching loop within the charge-pump section of the board and away from receiver inputs and sensitive analog traces. Add the recommended supply bypass capacitor at the VCC and GND pins so that supply disturbance from charge-pump transitions is minimized.

Route T1OUT and T2OUT away from R1IN and R2IN, especially when long RS-232 cables enter the board. Maintain a continuous ground reference, connect the connector ground according to the cable and enclosure strategy, and avoid routing driver currents through analog or digital return paths. This separation reduces the chance that transmitted transitions are coupled back into the receive channels.

Do not treat a common SOIC-16 footprint as proof of unconditional interchangeability. Confirm the supply range, data rate, ESD rating, temperature grade, charge-pump capacitor requirements, and exact pin assignments before substituting another MAX3232 ordering code. Also verify whether the connected logic uses TTL or CMOS thresholds and whether the RS-232 port requires hardware or software flow control.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The interface IC is listed as a production product. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not included in the cited product-page text, so these fields remain unknown.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX3232ECSE+T datasheet MAX3232ECSE+T pinout MAX3232ECSE+T datasheet pdf MAX3232ECSE+T equivalent MAX3232ECSE+T replacement MAX3232ECSE+T SOIC-16 footprint MAX3232ECSE+T price MAX3232ECSE+T stock Analog Devices MAX3232ECSE+T MAX3232ECSE+T vs MAX3232ESE+ MAX3232 1Mbps 3.0V RS-232 transceiver MAX3232ECSE+T industrial serial console

רכיבים ומונחים קשורים

Analog Devices MAX3232ECSE+T MAX3232ESE+ MAX3232CSE+ MAX3232CSE-T MAX3232ICSE MAX3232ECWE+ MAX3232EEWE+ RS-232 transceiver RS-232 interface IC line driver line receiver dual charge pump UART 3.3 V logic 5 V logic 1 Mbps data rate 15 kV ESD protection 10 nA low-power current SOIC-16 surface mount industrial serial console point-of-sale terminal data acquisition system test and measurement
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר