MAX323EPA+ - Dual SPST Analog Switch | Analog Devices | 8-DIP
MPN: MAX323EPA+ ✓ פעילMAX323EPA+ סקירה
An analog switch is a semiconductor device that connects or disconnects an electrical signal path under digital control. The MAX323EPA+ belongs to the analog-switch family within the broader interface-IC and semiconductor hierarchy. Its two SPST channels provide independent normally open paths, allowing analog signals to be routed, isolated, or sampled without changing the signal level. The single-supply operation also simplifies designs compared with dual-rail switch families.
Key features include two normally open switches, a +2.7V to +16V operating supply range, low power consumption of approximately 5 microwatts, and low on-resistance stated in the manufacturer product information. The MAX323 family is intended for battery-powered equipment, instrumentation, test systems, and general-purpose signal routing. The MAX323EPA+ uses an 8-pin DIP package with a rectangular body and through-hole mounting, making it suitable for industrial control boards, educational platforms, and legacy equipment.
The dual SPST architecture means that each switch has one common terminal and one normally open terminal. Control inputs determine whether the corresponding signal path is connected. Because the device is precision-oriented, it is appropriate for low-voltage control and measurement systems where switch behavior, supply range, and low power consumption matter. The manufacturer describes the MAX323, MAX324, and MAX325 as related precision switch families, with the MAX323 providing two normally open switches.
The MAX323EPA+ is suitable for battery-operated instruments, sensor interfaces, analog test equipment, industrial measurement systems, and sample-and-hold or signal-isolation circuits. Designers should keep the input and output signal amplitudes within the device's specified common-mode and voltage limits, provide adequate supply decoupling, and account for the nonzero off-state leakage and on-resistance when calculating accuracy.
For PCB layout, place the device close to the switched signal paths and route the control traces away from sensitive analog inputs. Confirm the 8-DIP footprint, verify the pin orientation, and check the electrical limits for the specific supply and signal conditions before releasing production artwork. This page combines the manufacturer product description, distributor package information, application guidance, and drop-in replacement analysis for faster engineering decisions.
חלופות תחליף ישיר עבור MAX323EPA+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ISL84541IP
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PS323CPA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX323EPA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL84541IPZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISL84541CP
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX323EPA+ דירוגים מרביים ומאפיינים חשמליים
| Product Type | Precision dual SPST analog switch |
| Number of Switches | 2 |
| Switch Configuration | Dual SPST |
| Normally Open Switches | 2 |
| Supply Voltage Range | +2.7V to +16V |
| Quiescent Power Consumption | 5 microwatts |
| Temperature Grade | Industrial |
| Package Type | 8-pin DIP |
| Number of Terminals | 8 |
| סוג הרכבה | Through-hole |
| Package Shape | Rectangular |
| Manufacturer | Analog Devices |
| Data Sheet Revision | Rev. 2 |
תצורת פינים של MAX323EPA+
| פין 1 | COM1 — Common terminal for switch 1 |
| פין 2 | COM2 — Common terminal for switch 2 |
| פין 3 | NC — Not connected |
| פין 4 | GND — Ground |
| פין 5 | V+ — Positive supply |
| פין 6 | NO2 — Normally open terminal for switch 2 |
| פין 7 | NO1 — Normally open terminal for switch 1 |
| פין 8 | NC — Not connected |
יישומים טיפוסיים
MAX323EPA+ מתאים עבור 6 יישוםs: Battery-Powered Sensor Interface, Industrial Analog Signal Routing, Test and Measurement Systems, Audio Signal Selection, Portable Medical Monitoring, Automated Test Fixture Signal Isolation.
Battery-Powered Sensor Interface
The MAX323EPA+ is suitable for routing sensor signals in battery-powered measurement equipment because the MAX323 family operates from +2.7V to +16V and is specified at approximately 5 microwatts of low power consumption. Place one normally open SPST path between the sensor output and the measurement amplifier, using the second channel for a reference or guard signal. This arrangement provides controlled connection without requiring a continuously powered multiplexer. Because the part is a switch rather than an amplifier, the application remains sensitive to on-resistance, leakage, and off-state behavior. Confirm those parameters against the signal amplitude and sensor impedance before finalizing the analog front end.
מומלץ
Industrial Analog Signal Routing
The MAX323EPA+ fits industrial analog signal routing where a compact, low-power, normally open switch is needed to connect or isolate a measurement path. The 8-pin DIP package simplifies assembly on industrial control boards that use through-hole components and allows easy inspection during maintenance. Its +2.7V to +16V supply range covers low-voltage control rails and permits operation from higher industrial rails. Use the two channels to select a sensor, calibrate input, or disconnect an external test fixture. Designers should verify the common-mode range, absolute maximum ratings, and temperature behavior for the actual industrial enclosure and supply tolerance.
מומלץ
Test and Measurement Systems
The MAX323EPA+ can provide two independent normally open paths in test and measurement equipment, such as loopback, fixture isolation, or signal injection circuits. The low 5 microwatt power specification supports compact bench instruments where standby consumption is important, while the single-supply range of +2.7V to +16V supports common control architectures. A typical implementation places the switch close to the measured node so that unused branches do not add unnecessary capacitance or leakage to the source. For accurate readings, include the switch's on-resistance and off leakage in the measurement error budget and compare the control timing with the instrument's acquisition sequence.
מומלץ
Audio Signal Selection
The MAX323EPA+ can select or isolate audio-related analog paths in compact equipment when the signal amplitudes and bandwidth remain within the switch's specified limits. Its two normally open channels allow a source, mute, or auxiliary path to be connected without introducing the complexity of a larger multiplexer. The low-power operation is useful in portable audio instruments and battery-powered monitoring devices. The switch should be placed near the source and receiver to minimize trace capacitance, and the analog ground return should remain continuous. Review the on-resistance, off leakage, and supply-noise specifications in the manufacturer datasheet before using the device in a high-fidelity signal path.
מומלץ
Portable Medical Monitoring
The MAX323EPA+ is applicable to portable medical monitoring equipment when a low-power, single-supply analog switch is required for signal isolation or controlled routing. The +2.7V minimum supply and approximately 5 microwatt power figure align with battery-operated instruments, while the 8-DIP package supports prototype and through-hole assembly. A switch can isolate a sensor during calibration or connect a test signal to an acquisition front end. The design must still satisfy the applicable medical product, safety, and reliability requirements, and the selected system's sensor protection and leakage budgets must be checked against the MAX323 electrical limits.
מומלץ
Automated Test Fixture Signal Isolation
The MAX323EPA+ is useful in automated test fixtures where a DUT node must be connected, disconnected, or routed to a different instrument channel. The two normally open switches provide independent isolation paths, and the low-power specification helps prevent the switch from adding meaningful load to portable or battery-powered test systems. Place the switch adjacent to the DUT connector and use short, controlled routes to minimize coupling between high-impedance test points. The control lines should be driven with compatible logic levels, and the design should account for switch settling time when the test sequence changes quickly. Verify the pin assignments and timing against the manufacturer datasheet before automating fixture transitions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX323EPA+ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ISL84541IP | PS323CPA | MAX323EPA | ISL84541IPZ | ISL84541CP |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Renesas Electronics | Renesas Electronics | Analog Devices | Renesas Electronics | Renesas Electronics |
| Package | 8-pin DIP | 8-pin DIP | 8-pin DIP | 8-pin DIP | 8-pin DIP | 8-pin DIP |
| Switch Type | Dual SPST | Dual SPST | Dual SPST | Dual SPST | Dual SPST | Dual SPST |
| Normally Open Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
מבדילים עיקריים
- Low-power single-supply operation (לעומתISL84541IP)
- Established MAX323 dual-SPST function (לעומתPS323CPA)
- Direct package continuity (לעומתISL84541CP)
הערות תכנון
Use the 8-pin DIP footprint and verify the pin-1 orientation against the package drawing before layout release. Keep the common and normally open traces short, especially when the connected source has high source impedance. Route the two channels so that switching one path does not create unnecessary coupling into the other; place the device near the connector or measurement node when signal integrity matters.
Place the supply bypass capacitor as close as practical to the V+ and GND pins and provide a low-impedance ground return. Although the manufacturer identifies approximately 5 microwatts of low power consumption, the actual system budget depends on the control states and leakage paths. Confirm the supply voltage remains between +2.7V and +16V across tolerance, transients, and startup conditions.
Do not select a replacement based only on the DIP package. Compare control polarity, common-mode range, on-resistance, off leakage, switching time, and absolute-maximum ratings between the MAX323EPA+ and the proposed substitute. Also verify whether the unused pins are no-connects or reserved terminals; the MAX323 pin-description table should be used when assigning PCB nets.
For high-impedance sources, include switch leakage and off-state capacitance in the error and settling calculations. Keep input and output branches separated to minimize parasitic coupling, and use a ground reference that remains continuous during switching. If the application measures small signals, evaluate the switch contribution alongside amplifier offset, resistor noise, and ADC acquisition timing.
מידע על תאימות
The verified product information identifies an industrial-temperature MAX323 device and a Rev. 2 data sheet, but it does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.