MAX3243EEAI+C9V - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3243EEAI+C9V ✓ פעילMAX3243EEAI+C9V סקירה
An RS-232 transceiver is an interface IC that combines line drivers and receivers for communicating between digital logic and a serial port using EIA/TIA-232 voltage levels. The MAX3243E family belongs to the transceiver hierarchy, with RS-232 interface ICs forming part of the broader communications-interface semiconductor category. Its three-driver, five-receiver arrangement supports complete serial-port signal paths while reducing the number of discrete interface components required.
Key features include a 3.0V to 5.5V supply range, operation up to 250kbps, ±15kV ESD protection, and a low 1µA shutdown current. Automatic shutdown and wakeup help reduce system power when the serial interface is idle. The 28-pin SSOP package is suitable for compact industrial, embedded, instrumentation, and data-communications equipment where board area and standardized surface-mount assembly are important.
The MAX3243E architecture uses charge-pump circuitry to generate the bipolar voltage levels required by RS-232 from a single low-voltage supply. Its three drivers and five receivers provide flexible channel allocation for PC-style serial ports. Two receiver outputs remain active during shutdown according to the family description, allowing selected incoming signals to be monitored without keeping the entire interface fully powered.
Typical applications include industrial serial adapters, embedded control systems, point-of-sale equipment, test instruments, data-acquisition systems, and legacy peripheral connections. The 3.0V minimum supply allows operation alongside 3.3V system logic, while the 5.5V maximum supports 5V designs. System designers should still verify signal levels, capacitance, line loading, and timing against the particular channel configuration.
For PCB implementation, place charge-pump capacitors and interface bypass capacitors close to their associated pins, keep the RS-232 connector-side traces away from sensitive analog and clock paths, and provide adequate return-current paths. Confirm the device's charge-pump capacitor values and stability requirements in the manufacturer datasheet before releasing the layout.
This page organizes the key electrical characteristics, drop-in alternatives, application guidance, comparison data, and practical layout considerations needed to evaluate the MAX3243EEAI+C9V for a new RS-232 interface design.
חלופות תחליף ישיר עבור MAX3243EEAI+C9V — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MAX3243EESA+
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MAX3243EESE+
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MAX3243EEAI+C9V מפרטים
| Transceiver Configuration | 3 drivers / 5 receivers |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV |
| Shutdown Supply Current | 1µA |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| Power Management Feature | Automatic shutdown/wakeup |
| מארז | 28-SSOP |
| סוג הרכבה | Surface mount |
| מספר פינים | 28 pins |
מדריך תצורת פינים של MAX3243EEAI+C9V 28-ssop
תצורת פינים עבור MAX3243EEAI+C9V (מארזת 28-ssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MAX3243EEAI+C9V.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MAX3243EEAI+C9V מתאים עבור 6 יישוםs: Embedded Serial Communication, Industrial Data Acquisition, Test and Measurement Instruments, Point-of-Sale Terminal, Legacy Peripheral Adapter, Power-Conscious Portable Equipment.
Embedded Serial Communication
The MAX3243EEAI+C9V fits embedded systems that need a full RS-232 port from a 3.3V controller because its supply range starts at 3.0V and extends to 5.5V. Place the device between the host UART and the DB9 or equivalent connector, then use the three drivers and five receivers according to the required handshake and monitoring paths. According to the manufacturer datasheet, the 250kbps data rate supports higher-speed legacy serial links. The principal design trade-off is that RS-232 drivers add level shifting rather than providing isolation, so board layout must keep switching-current paths and connector transients away from sensitive logic.
מומלץ
Industrial Data Acquisition
The MAX3243EEAI+C9V is suitable for industrial data-acquisition equipment requiring multiple RS-232 channels in a compact surface-mount footprint. Its three drivers and five receivers allow several external devices to share one interface card while leaving additional receiver channels available for status or acknowledgment signals. According to the manufacturer datasheet, the device operates from 3.0V to 5.5V and supports data rates up to 250kbps. For factory equipment, preserve the recommended bypass and charge-pump capacitor placement and use the connector-side ESD protection rating as part of the enclosure and grounding design rather than relying on the IC alone.
מומלץ
Test and Measurement Instruments
The MAX3243EEAI+C9V can connect legacy RS-232 accessories to a modern instrument controller through its three-driver, five-receiver arrangement. The 3.0V-to-5.5V operating range permits integration with both 3.3V control electronics and 5V interface circuitry, while the 250kbps rate covers many serial adapters, printers, and service ports. According to the manufacturer datasheet, automatic shutdown and wakeup can reduce power during idle intervals. Designers should use separate return-current paths and controlled connector grounding because the transceiver handles logic-level conversion but does not provide galvanic isolation or complete surge protection for every attached peripheral.
מומלץ
Point-of-Sale Terminal
The MAX3243EEAI+C9V is a practical interface for point-of-sale terminals that must support a printer, customer display, or other legacy RS-232 peripherals. Three driver channels allow simultaneous transmit paths when the protocol and system wiring permit, while five receiver channels can monitor additional peripheral signals. According to the manufacturer datasheet, the device supports a 3.0V-to-5.5V supply, 250kbps operation, and ±15kV ESD protection. Keep the connector side physically separated from sensitive logic and follow the specified charge-pump capacitor values, since incorrect capacitor placement can affect startup behavior and communications reliability.
מומלץ
Legacy Peripheral Adapter
The MAX3243EEAI+C9V is well suited to compact adapters that bridge a modern host UART with legacy RS-232 equipment. Its three drivers and five receivers provide more channel flexibility than a single-driver interface, allowing transmit, receive, and hardware-handshake lines to be consolidated in one 28-SSOP device. According to the manufacturer datasheet, automatic shutdown and wakeup help control idle power and the 250kbps rate covers typical peripheral-port traffic. Verify the adapter's logic voltage, cable length, connector pinout, and grounding scheme because the IC changes voltage levels but cannot compensate for incompatible protocols or poorly referenced cables.
מומלץ
Power-Conscious Portable Equipment
The MAX3243EEAI+C9V can serve portable or low-duty-cycle equipment where an RS-232 port is needed intermittently rather than continuously. Its specified 1µA shutdown current and automatic shutdown/wakeup behavior help reduce standby demand, while the 3.0V minimum supply supports integration with 3.3V portable systems. According to the manufacturer datasheet, the transceiver also supports 250kbps communication and ±15kV ESD protection. Validate the complete shutdown-control sequence and ensure that external pull components, the connector, and attached accessories do not dominate the system standby current.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX3243EEAI+C9V — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MAX3243EESA+ | MAX3243EESE+ |
|---|---|---|---|
| Package | 28-SSOP | 28-SSOP | 28-SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Driver and Receiver Configuration | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
| ESD Protection | ±15kV | ±15kV | ±15kV |
| Shutdown Supply Current | 1µA | 1µA | 1µA |
| Power Management | Automatic shutdown/wakeup | Automatic shutdown/wakeup | Automatic shutdown/wakeup |
מבדילים עיקריים
- Three-driver, five-receiver integration (לעומתMAX3243EESA+)
- Single-supply RS-232 operation (לעומתMAX3243EESE+)
- ESD protection and low-power shutdown (לעומתMAX3243EESA+)
הערות תכנון
Place the MAX3243EEAI+C9V charge-pump capacitors and local bypass capacitor directly beside the pins identified in the manufacturer datasheet. Keep these short, low-loop connections away from the RS-232 connector traces so that charge-pump currents do not share return paths with sensitive logic. The recommended capacitor values and permitted tolerances should be taken from the datasheet rather than replaced with general-purpose values without validation.
Route connector-side RS-232 signals separately from clocks, analog inputs, and reset traces, and provide a continuous ground reference beneath the interface area. The MAX3243EEAI+C9V provides ±15kV ESD protection, but its performance still depends on a short ESD-current path to the appropriate ground reference. Avoid sharing narrow neck traces between the connector protection network and sensitive circuitry.
Design the 3.0V-to-5.5V supply rail to accommodate both active operation and the chip's charge-pump switching requirements. Place the local bypass capacitor at the supply and ground pins, and verify ripple at the device under the intended data rate and cable loading. Automatic shutdown can reduce idle consumption, but external pull networks, termination, and attached circuitry may determine the board's actual standby current.
Do not substitute the MAX3243E for a MAX3237CAI+T solely because both support RS-232; interface channel counts, package dimensions, and pin assignments must match the existing PCB. Before replacing the MAX3243EEAI+C9V with MAX3243EESA+ or MAX3243EESE+, compare the complete manufacturer ordering information, temperature grade, package, pinout, and production shipping suffix.
מידע על תאימות
Compliance fields remain unknown because no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is present for this exact orderable part in the cited product information.