MC9S08JM16CLD - 48MHz 16KB USB MCU | NXP | 44-LQFP
MPN: MC9S08JM16CLD ✗ סוף ייצורMC9S08JM16CLD סקירה
An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The S08 core belongs to the broader embedded-controller hierarchy and provides a cost-effective platform for products that require deterministic control, serial communication, and limited data processing rather than a high-performance operating system.
The MC9S08JM16CLD combines 16 KB of flash with USB 2.0 full-speed device support. Its 48 MHz clock capability provides useful performance headroom for protocol handling and peripheral control. A 1 KB RAM area supports working data, while integrated USB connectivity simplifies direct connection to a host without requiring a separate USB controller. The 44-LQFP package exposes the device's complete peripheral and debug interface while remaining compatible with conventional surface-mount assembly.
The S08JM family is intended for economical USB designs, and the manufacturer describes the family as providing a fast, economical way to standardize serial communications in industrial and consumer applications. Real-time emulation and clock-generation resources support development and control-system designs that require predictable peripheral timing. USB firmware, HID-class or vendor-specific communication, status reporting, and local actuator control are natural uses for this combination of processing, memory, and connectivity.
Typical applications include USB-to-serial adapters, data-acquisition front ends, programmable control panels, compact test equipment, industrial interface modules, automotive accessories, and consumer USB peripherals. The 48 MHz S08 core can execute control logic while the USB subsystem manages enumeration and data transfer. Designers should account for the relatively modest 16 KB flash and 1 KB RAM when selecting application code, protocol libraries, and boot features.
Layout should follow the manufacturer pin and package guidance, especially for USB data, clock, reset, and decoupling connections. Place support components close to their associated pins and provide a clean return path for USB signals. Firmware development should use the applicable S08 programming and emulation tools, and production designs should include a recovery path for programming an end-of-life device.
This product page consolidates the device's core specifications, sourcing information, replacement constraints, and practical design guidance. It also distinguishes exact drop-in substitutes from broader functional alternatives, helping engineers assess continuity risk without assuming that a similar USB microcontroller is electrically and pin compatible.
חלופות תחליף ישיר עבור MC9S08JM16CLD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMC9S08JM16CLD דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit S08 USB microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| RAM | 1 KB |
| Architecture | CISC, 8-bit |
| USB Version | USB 2.0 full-speed |
| מתח אספקה | 3.3 V to 5 V |
| מארז | 44-LQFP, 10 mm x 10 mm |
| סוג הרכבה | Surface mount |
| Programming Interface | Real-time emulation |
| Clock Generator | Integrated |
| ADC | S08ADC12V1, 12-bit |
| Real-Time Counter | S08RTCV1 |
| External Reference Clock | MCGERCLK |
מדריך תצורת פינים של MC9S08JM16CLD 44-lqfp, 10 mm x 10 mm
תצורת פינים עבור MC9S08JM16CLD (מארזת 44-lqfp, 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08JM16CLD.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08JM16CLD מתאים עבור 6 יישוםs: USB-to-Serial Communication Adapter, Industrial Data-Acquisition Front End, Programmable Control Panel, Automotive USB Accessory Interface, Consumer USB Peripheral, Portable Test and Measurement Module.
USB-to-Serial Communication Adapter
The MC9S08JM16CLD fits a compact USB-to-serial adapter because its 48 MHz S08 core can handle command processing while the integrated USB 2.0 full-speed device controller manages host communication. The 16 KB flash can hold a USB stack and protocol firmware, while 1 KB of RAM provides working space for buffers and state management. The 44-LQFP package also exposes the complete set of MCU, USB, clock, reset, and peripheral connections. Designers should keep the USB data path compact, validate enumeration behavior across the intended host environment, and budget flash and RAM carefully before adding command sets or bootloader functions.
מומלץ
Industrial Data-Acquisition Front End
The MC9S08JM16CLD is suitable for a USB-connected data-acquisition front end because the S08 family includes an S08ADC12V1 12-bit converter and an S08RTCV1 real-time counter. At a 48 MHz maximum CPU frequency, the controller can sample, filter, timestamp, and transfer data while USB provides a convenient host interface. The 3.3 V to 5 V operating range supports integration with common embedded systems, although the exact analog input limits must be checked in the manufacturer data sheet. Keep analog routing away from USB clocks and switching edges, and choose external signal conditioning when sensor outputs exceed the MCU's input range.
מומלץ
Programmable Control Panel
The MC9S08JM16CLD can implement a compact programmable control panel that receives commands from a USB host and controls local indicators, relays, or actuators. Its real-time counter provides a useful timing resource, while the 48 MHz S08 core leaves processing headroom for status monitoring and deterministic control logic. The 16 KB flash and 1 KB RAM make careful code sizing essential, particularly when adding USB descriptors, debounce logic, and communication protocols. Use the exposed pins for control outputs, place USB routing away from sensitive analog sections, and validate timing through representative motor, relay, and operator-input waveforms.
מומלץ
Automotive USB Accessory Interface
The MC9S08JM16CLD can serve as the controller in a compact automotive USB accessory interface where a host needs configuration, status, or diagnostic exchange with an embedded electronic module. The integrated USB full-speed controller simplifies communication, and the 48 MHz S08 core supports protocol processing alongside peripheral management. Because the NXP device is marked End of Life and its automotive qualification status must be confirmed, a new safety- or security-sensitive vehicle design requires careful lifecycle and qualification review. Automotive implementations should also include suitable input protection, transient immunity, and fault recovery for power and USB connections.
מומלץ
Consumer USB Peripheral
The MC9S08JM16CLD is appropriate for a cost-conscious consumer USB peripheral that needs local control rather than heavy application processing. A 16 KB flash region can store compact firmware for enumeration, HID-class behavior, configuration storage, and device-specific logic, while the USB full-speed interface provides direct host connectivity. The device's limited RAM favors efficient buffer management, and the 44-LQFP footprint keeps the design relatively compact. Designers should calculate descriptor and firmware storage, validate sleep and resume behavior, and include a practical programming and recovery strategy before committing the product to production.
מומלץ
Portable Test and Measurement Module
The MC9S08JM16CLD can form the control core of a portable measurement module that communicates measurement results to a host over USB. Its 12-bit ADC, real-time counter, and 48 MHz processing capability support sampling, timing, filtering, and packet preparation in one compact device. The 3.3 V to 5 V supply range supports integration into portable instruments, but analog accuracy depends on the selected ADC channel, reference arrangement, and front-end design. Engineers should evaluate noise, input impedance, calibration, and ground separation, then test the complete module across the expected temperature range and USB connection states.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08JM16CLD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 44-LQFP, 10 mm x 10 mm |
| Brand | NXP Semiconductors |
| CPU Architecture | 8-bit S08 CISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| RAM | 1 KB |
| USB Support | USB 2.0 full-speed device |
| Supply Voltage | 3.3 V to 5 V |
| Analog-to-Digital Converter | S08ADC12V1, 12-bit |
| Real-Time Counter | S08RTCV1 |
| Development Interface | Real-time emulation |
| Lifecycle Status | End of Life |
מבדילים עיקריים
- Integrated USB connectivity in an 8-bit control MCU (לעומתATMEGA8U2-AUR)
- Established S08 family integration with real-time emulation (לעומתSTM8S103F2P3TR)
- Specific on-chip resources for USB measurement and control (לעומתSTM8L101F2P3TR)
הערות תכנון
Route the USB differential pair as a short, impedance-controlled pair with a continuous reference plane and minimal stubs. Place USB-support components near their associated pins, and keep clock and switching-current paths away from sensitive analog inputs. Because the target is marked End of Life, freeze the schematic and layout revision after qualification so equivalent parts are not introduced without a controlled engineering review.
Follow the NXP data sheet's recommended supply and decoupling configuration for the 44-LQFP device. The operating range is identified as 3.3 V to 5 V, but the exact operating-mode limits, absolute maximum ratings, and regulator configuration must be confirmed before power sequencing is finalized. Use local bulk and high-frequency decoupling to limit supply transients that could disturb USB signaling or ADC measurements.
Do not treat another S08 or USB microcontroller as a drop-in replacement solely because it uses a similar package or supports USB. Verify all 44 pin assignments, USB transceiver requirements, clock sources, reset behavior, peripheral mapping, programming interface, and memory organization. A cross-family candidate may require PCB changes, driver replacement, firmware porting, and a different development toolchain, making it a redesign rather than a drop-in substitution.
Plan firmware size and production programming before releasing a design. The device has 16 KB of flash and 1 KB of RAM, so USB descriptors, protocol code, diagnostics, bootloader functions, and application logic can consume the available memory quickly. Compile with the final toolchain and library configuration, reserve memory for stack use, and retain a documented recovery method for programming or erasing an end-of-life production unit.
מידע על תאימות
The NXP product page identifies the MC9S08JM16CLD as End of Life. Detailed environmental and material-compliance declarations were not established from the available product information.