MC9S08RD16CPE - 8-Bit 16KB Flash MCU | NXP | 28-PDIP
MPN: MC9S08RD16CPE ✓ פעילMC9S08RD16CPE סקירה
A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The S08 family belongs to the broader embedded-controller and microcontroller hierarchy, providing compact control for industrial, consumer, and communications equipment. Unlike a general-purpose processor, this device is optimized for low-cost real-time control, peripheral integration, and deterministic embedded operation.
The MC9S08RD16CPE's main specifications include 16 KB of built-in Flash for firmware, 1 KB of RAM for working data, 8 MHz processing speed, and 1.8 V to 3.6 V operation. Its 28-pin PDIP format supports through-hole PCB assembly and is useful for prototypes, legacy control boards, education platforms, and repair assemblies. The operating voltage range supports low-voltage digital systems, while the -40 °C to +85 °C rating covers extended industrial temperature requirements.
The HCS08 architecture is intended for embedded control systems requiring compact code execution, event-driven peripherals, and straightforward external interfacing. Program storage in internal Flash allows the firmware image to remain resident without an external memory device, while the 1 KB SRAM supports stack operations, variables, and immediate control-loop data. The exact peripheral mix, pin functions, clock configuration, and electrical limits should be confirmed against the manufacturer datasheet before the MCU is used in a new design.
Typical applications include small industrial controllers, sensor-conditioning systems, motor-control auxiliaries, appliance interfaces, LED drivers, and compact communications equipment. The device is particularly appropriate when a through-hole 28-pin MCU, modest Flash capacity, and low-voltage operation are preferred over a larger surface-mount package or high-performance 32-bit architecture.
For PCB design, maintain the specified supply voltage and decoupling arrangement, route sensitive clock and reset signals away from noisy switching nodes, and observe all unused-pin requirements. Because this is a PDIP package, verify connector orientation, pin-1 marking, and mechanical clearance during PCB layout. A functional equivalent is not automatically a drop-in replacement: memory size, peripheral mapping, clock behavior, and pin assignments must match.
This page combines the manufacturer-device identity, distributor specifications, lifecycle-oriented sourcing guidance, and design-focused selection notes to help engineers evaluate the MC9S08RD16CPE for embedded-control designs.
חלופות תחליף ישיר עבור MC9S08RD16CPE — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MC9S08RD16CPE
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08RD16CPE דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit HCS08 microcontroller |
| Manufacturer | NXP Semiconductors |
| CPU Architecture | HCS08 8-bit core |
| תדר שעון מקסימלי | 8 MHz |
| Flash Memory | 16 KB built-in Flash |
| RAM | 1 KB |
| Operating Voltage Range | 1.8 V to 3.6 V |
| טווח טמפרטורת פעולה | -40 °C to +85 °C |
| Number of I/O Lines | 23 |
| מארז | 28-pin PDIP |
| Package Type | Through-hole PDIP |
| Pitch | 0.600 in (15.24 mm) |
| סוג הרכבה | Through-hole |
| Programming Memory | Built-in Flash |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של MC9S08RD16CPE through-hole pdip
תצורת פינים עבור MC9S08RD16CPE (מארזת through-hole pdip). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08RD16CPE.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08RD16CPE מתאים עבור 6 יישוםs: Small Industrial Controller, Low-Voltage Sensor Interface, Appliance Control Board, LED Lighting Controller, Motor-Control Auxiliary Module, Communications Interface Module.
Small Industrial Controller
The MC9S08RD16CPE fits compact industrial controllers that need deterministic low-voltage control without a high-performance processor. Its HCS08 core operates at up to 8 MHz, while 16 KB of internal Flash stores the application program and 1 KB of RAM holds immediate variables and stack data. The 1.8 V to 3.6 V supply range allows integration with modern 3.3 V sensors and interface circuits. The PDIP package also simplifies repair and through-hole prototyping. Engineers should verify watchdog, communication, timer, and I/O requirements against the datasheet and provide industrial surge protection at external connectors.
מומלץ
Low-Voltage Sensor Interface
The MC9S08RD16CPE can act as the acquisition and control hub for a low-voltage sensor node because its 23 listed I/O lines provide connections for digital sensors, status indicators, and actuator controls. The 8 MHz HCS08 core is suitable for sampling, filtering, threshold evaluation, and communication framing when the workload remains modest. Its 1 KB RAM is adequate for short measurement buffers and control variables, while internal Flash supports firmware updates and operating logic. The -40 °C to +85 °C range suits deployed equipment when enclosure heating is controlled. Use the datasheet pin table to select ADC, timer, serial, and port functions.
מומלץ
Appliance Control Board
The MC9S08RD16CPE is appropriate for appliance control boards requiring modest computation, embedded firmware, and a through-hole upgrade path. Its 16 KB Flash can hold sequencing, safety-state logic, and user-interface routines, while the 1 KB RAM supports flags, timers, and keypad or display state. Operation at 1.8 V to 3.6 V permits use with regulated low-voltage control rails, and the 8 MHz clock provides adequate throughput for motor-step timing, button handling, and sensor monitoring. The PDIP footprint is particularly useful when maintaining legacy appliance boards. Validate start-up, brownout behavior, and safety shutdown paths in the complete appliance.
מומלץ
LED Lighting Controller
The MC9S08RD16CPE can drive a compact LED lighting controller when the design calls for programmable timing, dimming, status indication, and low standby complexity. Its 8 MHz HCS08 core is sufficient for timer-based sequencing and pulse-width modulation, and the 16 KB internal Flash accommodates lighting tables and control logic. The listed 23 I/O lines can serve as outputs, inputs, or interrupt-capable control signals. Running from a 1.8 V to 3.6 V rail also simplifies integration with low-voltage LED systems. The design must include suitable driver transistors or constant-current circuitry because the MCU is a controller, not the LED current regulator.
מומלץ
Motor-Control Auxiliary Module
The MC9S08RD16CPE can serve as an auxiliary controller in a motor-control system where it handles limit switches, encoders, sequence logic, diagnostics, and communication while a dedicated driver handles power conversion. Its HCS08 8-bit architecture is well matched to event-driven supervisory tasks at up to 8 MHz. The 1 KB RAM supports counters and motion-state variables, while 16 KB Flash holds control firmware and diagnostic tables. Its -40 °C to +85 °C specification supports industrial environments when the motor drive heats the enclosure. Electrical isolation, transient protection, and grounding must be designed around the motor system rather than inferred from the MCU rating.
מומלץ
Communications Interface Module
The MC9S08RD16CPE is suitable for a compact protocol-conversion or communications-control module when the design uses one or more of the MCU's serial and general-purpose interfaces. The 8 MHz core supports framed data handling, status monitoring, and configuration logic, while 16 KB Flash can retain protocol tables or bootloader code. Its 1.8 V to 3.6 V operating range supports integration with low-voltage transceivers, although interface levels must match exactly. The 28-pin PDIP package simplifies prototype construction and legacy repairs. Confirm the specific UART, SPI, and timer resources in the manufacturer pin and feature tables before assigning pins or calculating baud rates.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08RD16CPE — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC9S08RD16CPE |
|---|---|---|
| Package | 28-pin PDIP | 28-pin PDIP |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | 8-bit HCS08 | 8-bit HCS08 |
| Maximum Frequency | 8 MHz | 8 MHz |
| Flash Memory | 16 KB | 16 KB |
| RAM | 1 KB | 1 KB |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C |
| Number of I/O Lines | 23 | 23 |
| Mounting Type | Through-hole | Through-hole |
מבדילים עיקריים
- Exact 28-pin PDIP configuration (לעומתMC9S08QG4CPBE)
- Directly defined 16 KB Flash and 1 KB RAM configuration (לעומתMC9S08QG4CPBE)
- Low-voltage 8 MHz control capability (לעומתMC9S08QG4CPBE)
הערות תכנון
Design the supply around the specified 1.8 V to 3.6 V operating range and verify the appropriate decoupling network and startup limits in the manufacturer datasheet. Place the required bulk and bypass capacitors close to the power pins, keep the return-current path continuous, and avoid routing high-current switching returns through the MCU ground area. Brownout behavior, regulator tolerance, and peripheral load current can otherwise create conditions that the nominal voltage range alone does not describe.
Use the 28-pin PDIP footprint with a 0.600-inch, 15.24 mm lead pitch and confirm pin 1 orientation against the physical package marking. Maintain adequate spacing around the chip for through-hole insertion and rework, and avoid placing tall components where they interfere with socketed or lead-cut installations. For a legacy board replacement, compare every pad position and pin name rather than relying only on the package outline.
Route oscillator, reset, and communication signals away from switching nodes and motor-drive traces. Keep ground returns short and use a continuous ground plane where practical, adding only short, intentional return paths for high-current loads. If the board supports both the MCU and sensitive analog functions, partition analog and digital return currents and place filtering components near the active circuitry rather than near the controller.
Do not treat every 8-bit, 28-pin MCU as an interchangeable replacement. Firmware compatibility depends on the HCS08 peripheral map, memory organization, interrupt vector layout, clock setup, and pin multiplexing. Before substitution, rebuild the project for the new device, review its electrical limits and startup requirements, and test all board-level interfaces. Package similarity alone does not establish drop-in compatibility.
מידע על תאימות
JLCPCB lists the MC9S08RD16CPE as RoHS compliant. No definitive REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is available for the exact suffix.