MC9S08RD16PE-FR 8-Bit 16KB Flash MCU | NXP
MPN: MC9S08RD16PE-FR ✓ פעילMC9S08RD16PE-FR סקירה
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, input/output ports, timers, and communication peripherals on one device. The HCS08 MCU belongs to the embedded-controller hierarchy: 8-bit microprocessor core, microcontroller, embedded processing IC, and semiconductor. Its on-chip flash permits firmware to be stored locally rather than in an external memory chip, simplifying both board design and field programming.
The verified distributor data identifies the S08 family, an 8 MHz operating class, 16 KB organized as 16K x 8 flash, and a 28-pin plastic DIP package. The -FR ordering suffix is associated with the reel-packaged ordering designation, while the verified distributor listing identifies the target as a 28-PDIP. Additional electrical limits, timer resources, serial interfaces, ADC performance, operating temperature, and pin assignments are not present in the supplied source excerpts and therefore must be checked against the manufacturer datasheet before design release.
The 28-PDIP form factor supports conventional through-hole assembly and hand-soldered prototypes. Its larger lead pitch and accessible package geometry make it useful where a fine-pitch surface-mount MCU would complicate inspection, rework, or education. Because this is a legacy MCU family, firmware, clock, reset, peripheral, and memory-map compatibility should be checked carefully when replacing another device.
Typical uses include small control panels, sensor-conditioning systems, appliance controllers, laboratory fixtures, and legacy industrial interfaces. The 8 MHz S08 core and 16 KB flash provide sufficient resources for compact embedded logic, but they are not interchangeable with 16- or 32-bit processors when higher arithmetic throughput, larger memory, or high-speed networking is required.
Design should begin with the exact datasheet pinout, supply limits, decoupling requirements, programming interface, and oscillator options. Validate every used pin, peripheral resource, and timing requirement because only the package, architecture, frequency class, and flash capacity are verified here. A careful schematic and firmware comparison prevents a package-compatible part from being treated as an electrically or software-compatible replacement without evidence.
חלופות תחליף ישיר עבור MC9S08RD16PE-FR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMC9S08RD16PE-FR דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit HCS08 microcontroller |
| Manufacturer | NXP Semiconductors |
| Core | HCS08 |
| Maximum Stated Clock Frequency | 8 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| מארז | 28-pin plastic DIP (28-PDIP) |
| סגנון הרכבה | Through-hole |
| Product Series | S08 |
| CPU Architecture | 8-bit |
מדריך תצורת פינים של MC9S08RD16PE-FR 28-pin plastic dip (28-pdip)
תצורת פינים עבור MC9S08RD16PE-FR (מארזת 28-pin plastic dip (28-pdip)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08RD16PE-FR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08RD16PE-FR מתאים עבור 6 יישוםs: Legacy industrial controller, Educational control board, Small appliance controller, Laboratory measurement interface, Sensor-conditioning system, Legacy test fixture.
Legacy industrial controller
The MC9S08RD16PE-FR fits compact legacy-control boards that require an 8-bit controller, 8 MHz stated operation, 16 KB on-chip flash, and through-hole assembly. Its 28-PDIP package can simplify repair and retrofit work compared with a fine-pitch surface-mount design. The design should confirm the required I/O, timers, serial interfaces, ADC, reset circuit, clock source, and supply limits from the manufacturer datasheet before deployment.
מומלץ
Educational control board
The MC9S08RD16PE-FR is useful for teaching embedded-system fundamentals because it combines a documented 8-bit HCS08 architecture, 8 MHz stated clock class, and 16 KB flash in an accessible 28-pin DIP. Students can use it for basic I/O, timing, interrupts, and firmware demonstrations when the exact peripheral and pin resources are verified. A through-hole package also makes breadboard and through-hole teaching fixtures easier to assemble.
מומלץ
Small appliance controller
An MC9S08RD16PE-FR can serve as the central controller in a small appliance or equipment module when local logic, user-interface scanning, and compact firmware are sufficient. The 16 KB flash provides a defined firmware target, while the 28-PDIP package supports repairable through-hole assemblies. Before selecting it, verify operating temperature, supply voltage, I/O count, timer resolution, communication peripherals, and any safety-related isolation requirements.
מומלץ
Laboratory measurement interface
The MC9S08RD16PE-FR is appropriate for a simple laboratory interface or fixture controller when the measurement architecture does not require high-speed processing or large data storage. The 8-bit processor can coordinate front-panel inputs, indicators, sequencing, and low-bandwidth control logic. Confirm the exact ADC, timer, serial-interface, reference-voltage, and grounding requirements in the datasheet; those specifications are not established by the distributor excerpts.
מומלץ
Sensor-conditioning system
The MC9S08RD16PE-FR can coordinate a modest sensor-conditioning system with local control logic and firmware stored in its 16 KB flash. Its 8 MHz stated operating class is suitable for many low-bandwidth acquisition and switching tasks, but the exact ADC resolution, sampling capability, input count, and interface timing must be checked before selecting it. Use the MCU only after the sensor signal range and conditioning chain are mapped to verified electrical limits.
מומלץ
Legacy test fixture
The MC9S08RD16PE-FR is a practical candidate for a legacy test fixture that needs repeatable sequencing, digital control outputs, status indication, and serviceable through-hole construction. The 28-PDIP format can be easier to socket, inspect, and replace in low-volume fixtures than a compact surface-mount package. Validate the fixture's I/O voltage levels, timing margin, pin multiplexing, programming connector, and operating-temperature requirements before production use.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08RD16PE-FR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 28-pin plastic DIP (28-PDIP) |
| Brand | NXP Semiconductors |
| Product Type | 8-bit HCS08 microcontroller |
| Stated Clock Frequency | 8 MHz |
| Flash Memory | 16 KB (16K x 8 bits) |
| CPU Architecture | 8-bit |
| Series | S08 |
| Pin Count | 28 pins |
| Price Reference | $0.9150 related MC9S08RD16PE reference as of 2026-10-21 |
מבדילים עיקריים
- Legacy-compatible 8-bit S08 architecture (לעומתMC9S08RD16PE)
- Through-hole integration (לעומתMC9S08RD32PE)
- Local firmware storage (לעומתMC9S08SH8CPJ)
הערות תכנון
The verified package is a 28-PDIP, so place the socket or through-hole footprint on a grid compatible with the exact mechanical drawing. Confirm pin numbering, notch orientation, pin-one marking, and lead spacing against the manufacturer package drawing before PCB release. The supplied excerpts do not include dimensions or pin names; do not derive those details from a generic DIP footprint.
Design the supply network and decoupling around the exact datasheet limits, which are not included in the verified web excerpts. Confirm the operating-voltage range, absolute maximum ratings, startup behavior, reset requirements, and permitted clock source before selecting capacitors or regulators. Use the datasheet's recommended supply and bypass arrangement rather than assuming that the 8 MHz clock specification defines the power requirements.
Do not treat the related MC9S08RD16PE listing as a complete substitute specification for the -FR code. Check suffix, package marking, temperature grade, memory map, peripheral resources, programming interface, and lifecycle status separately. The verified results establish the S08 family, 8 MHz class, 16 KB flash, and 28-PDIP identity, but do not prove full drop-in equivalence.
מידע על תאימות
The supplied web results do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification documentation for the exact MC9S08RD16PE-FR ordering code.
