MC9S08SE4CTG - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP
MPN: MC9S08SE4CTG ✗ סוף ייצורMC9S08SE4CTG סקירה
A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and I/O in one package. The S08 architecture belongs to the 8-bit MCU hierarchy and provides a straightforward platform for embedded control. Within that hierarchy, MC9S08SE4CTG targets compact control tasks requiring modest Flash capacity, a 5 V supply environment, and a compact surface-mount footprint.
The principal specifications are an 8-bit HCS08 central processing unit, a 20 MHz maximum operating frequency, 4 KB of Flash memory, and a 10 MHz internal bus frequency. The family description emphasizes compatibility with Freescale's 5 V MCU portfolio, including peripheral and tooling compatibility. Its small Flash capacity suits bootloaders, simple sequencers, compact controllers, and accessory modules rather than graphics-heavy or connectivity-intensive applications.
The S08 core provides a straightforward instruction set and integrated control peripherals, while the 10 MHz internal bus accommodates the 20 MHz CPU architecture without requiring a fast external-memory interface. Because the MCU is intended for cost-sensitive embedded designs, software architecture should treat the 4 KB Flash limit as a primary design constraint. External serial EEPROM can extend data storage when parameter logging or nonvolatile configuration is required.
Typical uses include low-cost industrial controllers, appliance interfaces, small sensor nodes, battery-operated accessories, programmable timers, and simple motor-control front ends. The 16-pin TSSOP is particularly useful where board area is constrained and a through-hole or larger surface-mount package would be unnecessary. Firmware should be validated at the 20 MHz maximum clock, with oscillator tolerance, supply voltage, and peripheral timing included in the worst-case analysis.
The main design trade-off is the limited 4 KB Flash capacity. Engineers should minimize library size, reserve space for boot code or updates where required, and use external EEPROM for larger nonvolatile data. The TSSOP package also has closely spaced leads, so inspect the manufacturer land pattern carefully and maintain adequate soldermask clearance. No external memory-bus or advanced analog specification should be assumed without checking the full device documentation.
This product page combines lifecycle status, core specifications, family-level compatibility information, application guidance, and drop-in migration considerations. It helps engineers distinguish a direct same-package replacement from a redesign and plan sourcing for an end-of-life 8-bit MCU while keeping code, hardware, and schedule risk visible.
חלופות תחליף ישיר עבור MC9S08SE4CTG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MC9S08SE4CTG (אותו גורם צורה וטביעת רגל) — שונים ב Package, Mounting Type, Lifecycle Status, Program Memory, Connectivity.
MC9S08QE4CTG
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08SE8CTGR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08SE4CT
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08PL4CTG
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08PA4VTGR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08SE4CTG דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit HCS08 microcontroller |
| CPU Bit Width | 8 bit |
| Maximum CPU Frequency | 20 MHz |
| Internal Bus Frequency | 10 MHz |
| Flash Memory | 4 KB (4K x 8) |
| Supply Class | 5 V MCU |
| Core | HCS08 / S08 core |
| מארז | 16-pin TSSOP |
| סוג הרכבה | Surface mount |
| סטטוס מחזור חיים | End of Life |
מדריך תצורת פינים של MC9S08SE4CTG 16-pin tssop
תצורת פינים עבור MC9S08SE4CTG (מארזת 16-pin tssop). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08SE4CTG.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08SE4CTG מתאים עבור 6 יישוםs: Low-Cost Appliance Controller, Industrial Sensor Interface, Programmable Timer Module, Battery-Powered Accessory, Simple Motor-Control Front End, Small Communication Gateway.
Low-Cost Appliance Controller
MC9S08SE4CTG fits compact appliance-control boards that coordinate buttons, indicators, relays, and a small sequence of motors or heaters. Its 8-bit S08 core and 20 MHz operating speed are sufficient for deterministic supervisory logic, while the 4 KB Flash budget favors simple firmware with direct hardware access. The 16-pin TSSOP conserves board area, but the design must reserve Flash for boot requirements and use external EEPROM if operating-hour or fault-history storage is needed. NXP's S08 5 V ecosystem and existing S08 toolchain support make this architecture practical for low-cost control products.
מומלץ
Industrial Sensor Interface
MC9S08SE4CTG can serve as the local controller for a compact industrial sensor module that samples switches, resistive elements, or externally conditioned analog signals. The 20 MHz HCS08 CPU provides timing margin for debouncing, calibration, fault detection, and communication framing, while the 5 V-oriented S08SE family fits established industrial interfaces. Because only 4 KB of Flash is available, application firmware should be modular and avoid unnecessary abstraction layers. Confirm ADC availability and pin multiplexing in the device documentation before assigning analog inputs, and consider external serial EEPROM for long-term configuration records.
מומלץ
Programmable Timer Module
MC9S08SE4CTG is suitable for programmable timer modules that combine elapsed-time measurement, relay or pulse outputs, status LEDs, and a simple user interface. At 20 MHz, the CPU can divide timers, debounce inputs, and update displays without moving the design to a higher-performance MCU. The compact 16-pin TSSOP package is useful inside enclosed appliance-accessory products, and the S08 core retains compatibility with established 5 V development practices. Firmware must remain within 4 KB of Flash, while nonvolatile schedules and counters should be placed in external EEPROM if the internal memory is insufficient.
מומלץ
Battery-Powered Accessory
MC9S08SE4CTG can control low-duty-cycle accessories such as battery-backed indicators, small keyfobs, sensor interfaces, and compact actuators. Its S08 core provides sufficient processing for state machines, button handling, low-power wake-up logic, and periodic measurements without adding a larger processor. The 4 KB Flash limit supports a deliberately small firmware image, while the 16-pin TSSOP keeps the footprint compact. Current consumption and sleep-mode behavior must be checked against the device specification, and the power budget should include pull-up or pull-down leakage because external resistors can dominate standby demand.
מומלץ
Simple Motor-Control Front End
MC9S08SE4CTG is appropriate for a simple motor-control front end when it manages commands, interlocks, speed-reference logic, and protection signals while a dedicated driver handles the power stage. The 20 MHz 8-bit CPU can execute deterministic supervisory tasks, and the 16-pin TSSOP fits closely spaced control boards. The MCU should not be assumed to include a dedicated advanced timer or ADC without confirming the relevant pin and peripheral options. Use separate logic for current limiting and overcurrent shutdown, and validate startup behavior, voltage margins, and timing under the highest motor-supply transient.
מומלץ
Small Communication Gateway
MC9S08SE4CTG can act as a lightweight gateway for translating a simple serial interface into local control signals, status reporting, or configuration storage. Its 8-bit architecture is suitable when protocol processing is modest and the 4 KB Flash footprint holds the required parser and state machine. The device can coordinate a UART, GPIO, and external nonvolatile storage when those functions are confirmed for the selected configuration. Protocol buffers, diagnostics, and upgrade code consume memory quickly, so firmware sizing should include worst-case framing and failure recovery. A larger-Flash S08-family option may be preferable for protocol-heavy gateways.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08SE4CTG — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC9S08QE4CTG | MC9S08SE8CTG | MC9S08SE4CT | MC9S08PL4CTG | MC9S08PA4VTG |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| CPU Architecture | 8-bit HCS08 / S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core | 8-bit S08 core |
| Flash Memory | 4 KB (4K x 8) | 4 KB class | 8 KB class | 4 KB class | 4 KB class | 4 KB class |
| Supply Class | 5 V MCU | 5 V MCU class | 5 V MCU class | 5 V MCU class | 5 V MCU | 5 V MCU class |
מבדילים עיקריים
- Direct S08SE-family continuity (לעומתMC9S08PL4CTG)
- Lower Flash footprint for tightly constrained firmware (לעומתMC9S08SE8CTG)
- Legacy lifecycle fit versus migration alternatives (לעומתMC9S08QE4CTG)
הערות תכנון
Do not treat package equality as proof of a drop-in migration. Before replacing MC9S08SE4CTG, compare the manufacturer pin tables for power, ground, reset, oscillator, programming, and every multiplexed I/O function. Also compare interrupt vectors, timer registers, ADC or comparator options, and initialization code. The 4 KB Flash limit and legacy S08 peripheral naming make an application-level register review more important than a simple PCB footprint comparison.
Estimated: the CPU current contribution is approximately 20 MHz multiplied by the device's active current per cycle, plus peripheral and I/O current. Confirm both values in the manufacturer datasheet before sizing the 5 V regulator. Keep the calculation separate from external sensor and communication loads. Provide local bulk and high-frequency decoupling at the supply pins, and route return current through the ground plane without narrow splits beneath the TSSOP.
Place decoupling capacitors adjacent to the MCU supply pins and keep the programming and debug signal traces away from switching nodes and high-current motor paths. Follow the manufacturer land pattern for the 16-pin TSSOP because lead pitch and exposed thermal-pad treatment cannot be assumed from the package name alone. Check every footprint dimension against the final ordering code before release, particularly when replacing an end-of-life assembly with a different package suffix.
Budget the 4 KB Flash before finalizing firmware architecture, including startup code, interrupt handlers, drivers, diagnostics, and any bootloader. A linker map file should show adequate margin after compilation rather than relying on nominal source-code size. If configuration history, calibration tables, or event logs require more storage, use an external serial EEPROM and define a fault-safe update scheme so a power interruption cannot corrupt critical parameters.
מידע על תאימות
The NXP product page includes Environmental Quality and Shipping Discontinuance sections, but the available excerpt does not state individual compliance results.