MCP3564RT-E/ST - 24-Bit 153.6kSPS ADC | Microchip
MPN: MCP3564RT-E/ST ✓ פעילMCP3564RT-E/ST סקירה
An analog-to-digital converter is an interface IC that converts continuously varying voltage signals into digital codes for processing by a microcontroller, DSP, FPGA, or data-acquisition system. The sigma-delta ADC category belongs to the broader ADC and data-converter hierarchy. Delta-sigma conversion is especially useful when high resolution, low noise, and good rejection of out-of-band noise are more important than very high conversion speed.
The MCP3564RT-E/ST combines 24-bit resolution with four differential or eight single-ended channels. Its programmable input gain supports scaling of small sensor outputs, while the integrated reference reduces the number of external precision components. A maximum data rate of 153.6 kSPS makes the device suitable for continuous monitoring rather than high-speed waveform capture. The operating temperature range extends from -40 °C to 125 °C, covering industrial environments.
The converter uses a sigma-delta architecture to shape quantization noise away from the measurement band. The integrated PGA conditions low-level analog inputs before conversion, and the internal voltage reference supports repeatable measurements without requiring an external reference source. The 20-pin TSSOP package keeps the design compact, although careful PCB layout is important because high-resolution ADCs can be affected by reference and power-supply noise.
Typical applications include industrial process measurement, precision temperature sensing, strain-gauge and bridge excitation, laboratory data acquisition, and low-frequency sensor monitoring. Four differential inputs are useful for rejecting common-mode noise in balanced sensor networks, while eight single-ended inputs increase channel density when common-mode rejection is less important. The device can also serve as the analog front end for embedded control systems that require high-resolution conversion at moderate data rates.
For a new design, confirm the exact external reference configuration, antialiasing requirements, channel count, and digital interface before layout. Place input and reference decoupling close to their associated pins, preserve a quiet analog ground path, and route digital communication away from sensitive analog inputs. The TSSOP footprint also requires adequate copper and thermal relief for reliable assembly and stable operation across the full temperature range.
This product summary combines manufacturer specifications, lifecycle information, package details, pricing context, replacement options, and practical PCB guidance to support component selection and board design. It also highlights the distinctions between the MCP3564 and MCP3564R versions so engineers can select the correct integrated-reference configuration for new equipment.
חלופות תחליף ישיר עבור MCP3564RT-E/ST — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MCP3564RT-E/ST (אותו גורם צורה וטביעת רגל) — שונים ב Package, Package Type.
MCP3564R-E/ST
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCP3564-E/ST
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCP3564RT-E/ST דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 24 bit |
| ADC Architecture | Sigma-delta |
| Maximum Data Rate | 153.6 kSPS |
| Input Configuration | 8 single-ended or 4 differential inputs |
| Programmable Gain Amplifier | Integrated |
| Internal Voltage Reference | Integrated |
| מתח אספקה | 3 V |
| טווח טמפרטורת פעולה | -40 °C to +125 °C |
| מארז | 20-pin TSSOP |
| סוג הרכבה | Surface mount |
| סטטוס מחזור חיים | Active |
| RoHS Compliance | Compliant |
| Manufacturer Recommended Variant | MCP3564R for new designs |
| Analog Input Count | 4 differential inputs or 8 single-ended inputs |
| Converter Type | Low-noise ADC |
| Order Code Channel | RT-E/ST |
| Lead Time | 3-7 business days |
| ECCN | EAR99 |
מדריך תצורת פינים של MCP3564RT-E/ST 20-pin tssop
תצורת פינים עבור MCP3564RT-E/ST (מארזת 20-pin tssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור MCP3564RT-E/ST.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MCP3564RT-E/ST מתאים עבור 6 יישוםs: Industrial Process Measurement, Precision Temperature Sensing, Strain and Bridge Sensor Acquisition, Laboratory Data Acquisition, Environmental Sensor Monitoring, Battery-Powered Monitoring.
Industrial Process Measurement
The MCP3564RT-E/ST fits industrial process monitoring because its 24-bit resolution and four differential inputs can measure small voltage changes from pressure, level, and chemical sensors. The integrated programmable gain amplifier conditions low-level signals, while the 3 V supply simplifies power planning in compact acquisition hardware. Its maximum rate of 153.6 kSPS is appropriate for continuous process values rather than fast transient capture. Place the differential inputs over a quiet analog ground region, decouple the supply near the device, and verify the selected gain against the full sensor-output range.
מומלץ
Precision Temperature Sensing
The MCP3564RT-E/ST can digitize thermocouple, RTD, or thermistor signals when the front end provides suitable amplification and protection. Its 24-bit resolution supports fine temperature resolution, while four differential channels allow paired measurements that can reject common-mode disturbance. The integrated PGA and reference reduce external component count, and the -40 °C to 125 °C device rating supports industrial equipment. Select the gain and conversion rate for the sensor bandwidth, isolate sensitive inputs from switching circuitry, and include suitable input protection where sensor wiring leaves the enclosure.
מומלץ
Strain and Bridge Sensor Acquisition
The MCP3564RT-E/ST is appropriate for strain gauges, load cells, and resistive bridge sensors because four differential inputs can carry complementary sensor outputs and reduce common-mode noise. The 24-bit sigma-delta conversion and integrated PGA are useful when the bridge produces a small millivolt-level signal that must be digitized accurately. The 153.6 kSPS maximum rate leaves ample bandwidth for static force measurements and slow mechanical changes. Use shielded differential routing, a stable excitation supply, low-leakage input protection, and a defined digital-filter settling strategy for repeatable readings.
מומלץ
Laboratory Data Acquisition
The MCP3564RT-E/ST gives laboratory instruments four differential measurement channels with 24-bit resolution, allowing multiple low-level inputs to share one converter. Its integrated PGA and voltage reference support a compact analog front end, while 153.6 kSPS is sufficient for many voltage, current, and resistance measurements. The 20-pin TSSOP package simplifies compact instrument construction without requiring a large package footprint. Designers should still reserve analog ground area, reference bypass capacitance, and separate routing for digital clock and data signals to preserve measurement integrity.
מומלץ
Environmental Sensor Monitoring
The MCP3564RT-E/ST can monitor humidity, gas, pressure, and environmental sensor nodes when several channels must share a high-resolution converter. Eight single-ended inputs increase channel density for slowly changing signals, while four differential inputs offer better noise rejection when the sensor is referenced to a biased or noisy ground. Its integrated reference and PGA reduce the support circuit count in distributed monitoring equipment. Use consistent channel scaling, calibrate gain and offset in firmware, and keep high-current switching loads away from the analog input and reference paths.
מומלץ
Battery-Powered Monitoring
The MCP3564RT-E/ST supports battery-powered sensing systems because it combines a 3 V operating supply with a compact 20-pin TSSOP package and integrated PGA and reference functions. It can digitize low-energy sensors such as temperature, light, and current monitors without requiring separate analog conditioning components for every channel. The 153.6 kSPS rate allows periodic or continuous sampling, while the converter’s 24-bit resolution preserves small signal detail. Duty-cycle the system where possible, disable unused channels, select the lowest acceptable data rate, and account for reference and digital-interface current in the energy budget.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCP3564RT-E/ST — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MCP3564R-E/ST | MCP3564-E/ST |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 24 bit | 24 bit | 24 bit |
| ADC Architecture | Sigma-delta | Sigma-delta | Sigma-delta |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS |
| Input Configuration | 4 differential or 8 single-ended inputs | 4 differential or 8 single-ended inputs | 4 differential or 8 single-ended inputs |
| Integrated Voltage Reference | Yes | Yes | No |
| Programmable Gain Amplifier | Integrated | Integrated | Integrated |
| New-Design Recommendation | MCP3564R is preferred by the manufacturer for new designs | MCP3564R family is preferred | MCP3564R family is preferred |
מבדילים עיקריים
- Preferred Microchip family member for new designs (לעומתMCP3564R-E/ST)
- Integrated reference simplifies the measurement front end (לעומתMCP3564-E/ST)
- High resolution with moderate-speed acquisition (לעומתMCP3301T-BI/SN)
הערות תכנון
Route the four differential inputs as short, symmetric traces on a quiet analog layer, with continuous ground beneath them. Keep switching-regulator paths, digital clocks, and high-current outputs away from the input and reference nodes. Because the MCP3564RT-E/ST resolves 24-bit signals, small ground-potential differences can affect the result. Place the supply bypass capacitor close to the device and follow the reference and decoupling guidance in the manufacturer datasheet.
Choose the PGA gain so that the largest expected input, including tolerance and overrange, remains within the converter’s allowed range. Avoid operating near the saturation limit merely to increase nominal resolution. Verify the gain settings, differential input range, common-mode range, and recommended settling time in the electrical tables. Add input clamping only with devices whose leakage, capacitance, and clamp voltage are compatible with the selected gain.
Operate the MCP3564RT-E/ST from the specified 3 V supply and place local high-frequency bypass capacitance close to the supply pins. Separate analog and digital return paths as far as practical, then connect them at the system ground reference point. A linear regulator may be suitable for a clean analog rail, but its output noise must be checked against the converter’s noise requirements. Keep the reference and analog supply routing away from pulsed load currents.
Do not treat MCP3564 and MCP3564R as identical reference configurations: Microchip states that MCP3564R includes the onboard voltage reference while MCP3564 does not. Before replacing MCP3564RT-E/ST with MCP3564-E/ST, confirm whether the board expects the integrated reference or an external source. Also compare the complete order codes for temperature grade, package style, qualification, and reel configuration rather than relying only on the base family name.
מידע על תאימות
RoHS compliance and EAR99 classification are stated for MCP3564RT-E/ST. Other compliance attributes are unknown and should be confirmed against the manufacturer’s current declarations.