MPC8533VJALFA - PowerPC e500v2 MPU 667MHz | NXP 783-FCPBGA
MPN: MPC8533VJALFA ⚠ רכישה אחרונהMPC8533VJALFA סקירה
A PowerQUICC III communications processor is an integrated SoC that combines a PowerPC embedded core with multiple high-speed connectivity peripherals. It belongs to the broader category of communications processors, which sit between general-purpose microprocessors and DSPs in the taxonomy: communications processor > microprocessor (MPU) > processor > semiconductor. The PowerQUICC lineage targets enterprise networking and multi-function peripherals that require deterministic I/O and packet handling alongside general-purpose compute.
Headline features of the MPC8533VJALFA include a 667 MHz e500v2 core with dual-dispatch 7-stage out-of-order pipeline, integrated 1GbE, PCI Express, DDR1/DDR2 memory controller, USB 2.0, and an enhanced peripheral set with security engine. Supply voltages are 1.8V/2.5V/3.3V, and the junction operating range is 0C to 90C.
Architecturally, the device pairs the e500v2 core with a high-bandwidth system bus and dedicated peripheral blocks, allowing simultaneous wire-rate Ethernet processing and control-plane execution. The integrated security engine accelerates common cryptographic primitives, reducing host CPU load in VPN/SSL gateway and routing applications.
Typical applications include enterprise routers and switches, multi-function printers (MFPs), Ethernet interworking gateways, industrial control boards, and embedded networking appliances that need Gigabit Ethernet with deterministic latency. The non-E variant (no 'E' suffix) omits the security engine in firmware-disabled configuration, suiting cost-sensitive designs.
A key design consideration is thermal management: with multiple high-speed peripherals, the FCBGA substrate must use a multilayer PCB with continuous via arrays under the thermal pad. Stocking is constrained because NXP has marked the family end-of-life; users should verify last-time-buy windows before committing to new designs.
This page synthesizes distributor pricing across DigiKey/Mouser/Octopart, drop-in package alternatives from the same family, lifecycle status, and design notes not found in the manufacturer datasheet alone, giving procurement and design engineers one consolidated reference.
חלופות תחליף ישיר עבור MPC8533VJALFA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MPC8533VJALFA (אותו גורם צורה וטביעת רגל) — שונים ב Ethernet, Mounting Type, Operating Temperature, Process Technology, Security Engine.
MPC8533VIALFA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8533VTALFA
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MPC8533ECVJALFA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8533VVJALFA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8536AVJALFA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8533VJALFA דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PowerPC e500v2 |
| Core Count | 1 |
| רוחב אפיק נתונים | 32-bit |
| Maximum CPU Frequency | 667 MHz |
| מארז | 783-FCPBGA (29x29 mm) |
| טמפרטורת פעולה | 0C to 90C |
| מתח אספקה | 1.8 V / 2.5 V / 3.3 V |
| Memory Controller | DDR1 / DDR2 |
| Ethernet | 10/100/1000 Mbps (1GbE) |
| PCI / PCIe Support | PCI and PCI Express |
| USB | USB 2.0 |
| Security Engine | Not included (non-E variant) |
| Series | PowerQUICC III (MPC85xx) |
| סוג הרכבה | Surface Mount (FCBGA) |
| Process Technology | 90 nm |
| סטטוס RoHS | Compliant |
| Lead-Free | Yes |
תצורת פינים של MPC8533VJALFA
| פין A1 | VDD — Core supply voltage (1.0V nominal) |
| פין B23 | GND — Ground reference |
| פין E15 | DDR_DQ[0] — DDR2 data bit 0 |
| פין G10 | TSEC1_TXD[0] — Gigabit Ethernet transmit data 0 |
| פין H22 | PCI_AD[31] — PCI/PCIe address/data bit 31 |
| פין M05 | USB_DP — USB 2.0 data plus |
| פין AC17 | SYS_CLK — System clock input |
| פין AF28 | PORESET — Power-on reset |
יישומים טיפוסיים
MPC8533VJALFA מתאים עבור 6 יישוםs: Enterprise Router / Gateway, Multi-Function Printer (MFP) Controller, Industrial Control Board, Edge Network Appliance, Embedded Networking Storage (NAS), VoIP / Unified Communications Appliance.
Enterprise Router / Gateway
The NXP MPC8533VJALFA is well suited to enterprise router and interworking gateway designs because its PowerPC e500v2 core runs control-plane networking stacks (Linux, VxWorks, NPS) while the integrated eTSEC delivers wire-rate 1GbE throughput. Its dual-dispatch pipeline plus dedicated peripheral engines keep packet processing off the host CPU, and DDR2 with ECC maintains integrity for routing tables. The 667 MHz speed bin targets branch-office and SME gateway products where cost dominates over peak throughput.
מומלץ
Multi-Function Printer (MFP) Controller
Multi-function printers demand an MPU that simultaneously drives a scanner pipeline, rendering engine, network protocols and the operator UI. The NXP MPC8533VJALFA satisfies this with its 667 MHz e500v2 core, integrated Gigabit Ethernet for office network connectivity, USB 2.0 for peripherals, and DDR2 controller with enough bandwidth for image buffers. The FCBGA package enables the compact board shapes typical of MFP main boards while leaving room for the security engine option (E variant) needed for secure print release workflows.
מומלץ
Industrial Control Board
Industrial control boards benefit from the MPC8533VJALFA's deterministic e500v2 execution and rich peripheral mix: PCI/PCIe for I/O cards, dual Gigabit Ethernet for redundant fieldbus connectivity, and DDR2 with ECC for memory integrity in electrically noisy environments. The 0C-90C commercial temperature range supports typical control cabinet deployments, and developers get a familiar Linux toolchain plus mainline kernel support. Selecting the industrial -40C-105C variant (VT suffix) extends the design into outdoor or factory-floor installations.
מומלץ
Edge Network Appliance
Edge appliances such as SD-WAN gateways, VPN concentrators, and industrial firewalls benefit from the MPC8533VJALFA's integrated Gigabit Ethernet plus optional hardware crypto via the E variant. The 667 MHz core runs lightweight IPSec/SSL stacks with the security engine accelerating bulk crypto; without the E engine, the host CPU still handles IPsec at tens of Mbps. The compact 783-FCPBGA package enables fanless designs with a moderate thermal budget when the CPU is power-gated during idle periods.
מומלץ
Embedded Networking Storage (NAS)
Small-business NAS controllers leverage the MPC8533VJALFA's DDR2 controller, Gigabit Ethernet, and PCI/PCIe for SAS/SATA controller cards. The e500v2 core runs embedded Linux distributions optimized for file-serving workloads such as OpenWrt or custom BSD derivatives. While raw throughput maxes out around file-serving for tens of simultaneous clients, the device's low power consumption versus x86 alternatives makes it attractive for energy-efficient SMB storage products in office environments.
מומלץ
VoIP / Unified Communications Appliance
VoIP and unified-communications appliances benefit from the MPC8533VJALFA's e500v2 core handling SIP/RTP processing plus the integrated Gigabit Ethernet providing QoS-aware packet handling. PCI slots accept DSP cards for transcoding codecs (G.729, Opus) while USB 2.0 supports operator handsets and storage. The 667 MHz speed bin addresses mainstream SMB UC products that need deterministic packet latency rather than raw CPU throughput, and the power-efficient FCBGA package enables fanless desktop form factors.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MPC8533VJALFA — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MPC8533VIALFA | MPC8533VTALFA | MPC8533ECVJALFA | MPC8533VVJJALFA | MPC8536AVJALFA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Core Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 533 MHz | 833 MHz |
| Operating Temperature | 0C to +90C | -40C to +90C | -40C to +105C | 0C to +90C | 0C to +90C | 0C to +90C |
| Security Engine | Not included | Not included | Not included | Included (E variant) | Not included | Not included |
| Series / Family | PowerQUICC III MPC85xx | PowerQUICC III MPC8533 | PowerQUICC III MPC8533 | PowerQUICC III MPC8533E | PowerQUICC III MPC8533 | PowerQUICC III MPC8536 |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Ethernet | 1 x 10/100/1000 Mbps (eTSEC) | 1 x 10/100/1000 Mbps | 1 x 10/100/1000 Mbps | 1 x 10/100/1000 Mbps | 1 x 10/100/1000 Mbps | Up to 2 x 10/100/1000 Mbps |
מבדילים עיקריים
- Wide range of family variants on identical 783-FCPBGA footprint (לעומתMPC8533ECVJALFA vs MPC8533VVJALFA)
- Mature PowerPC software ecosystem including mainline Linux (לעומתNewer ARM Cortex-A5 SoCs)
- Integrated eTSEC plus security engine on E variant (לעומתDiscrete MPU plus external Ethernet MAC)
הערות תכנון
The 783-FCPBGA package has limited dissipation capability from the top side; designers should rely on a continuous copper ground plane stitched with microvia arrays directly beneath the die area. Estimated: at 667 MHz with VDD_core = 1.0V and typical DDR2 I/O activity, total package power dissipation is approximately 3.5-5W. A 50 mm x 50 mm four-layer PCB with 1 oz copper on outer layers keeps junction-to-ambient thermal resistance near 15 C/W, well within the 90C commercial limit.
Use the standard 1.0 mm ball-pitch land pattern from NXP package specification IBIS models. Place four 0.1 uF decoupling caps on each core VDD ball within a 5 mm radius, plus bulk 22 uF ceramic on each voltage rail. Match DDR2 trace lengths within 25 mils of the longest segment to satisfy DDR2-533 timing closure with read/write deskew. Reference: Freescale PowerQUICC III Hardware Specifications, Section 2 (DDR controller).
The MPC8533VJALFA is currently in NXP's end-of-life / last-time-buy window. Securing an authorized-channel supply requires multi-year forecast commitments. Mixing 'A' (no security) and 'E' (with security) firmware on the same hardware is unsupported - field devices must match the firmware table to the silicon suffix printed on the top marking. Designers unfamiliar with PowerQUICC should allocate 6-12 months for BSP bring-up on first prototype.
מידע על תאימות
RoHS compliant and lead-free per NXP product page and DigiKey listings. REACH and halogen-free status unknown in publicly available data. AEC-Q100 not applicable - this is a commercial-grade communications processor.