Texas Instruments

MSP430F1222IPW - 8MHz 16-Bit MCU with 4KB Flash | Texas Instruments

MPN: MSP430F1222IPW ✓ פעיל
0.1 µA Id TSSOP-28 (PW) Package 8 MHz Speed 4 KB Memory
כמות הזמנה מינימלית: 1 |

MSP430F1222IPW סקירה

The Texas Instruments MSP430F1222IPW is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 4 KB of Flash memory, 256 B of SRAM, a 10-bit ADC, timer, SPI, and UART in a 28-pin TSSOP package. It is designed for embedded systems that require compact control, analog measurement, and low-power operation. The MSP430 architecture combines a 16-bit RISC core with a mixed-signal peripheral set, allowing sensor acquisition, control-loop monitoring, and serial communication in one device.

A microcontroller is the central programmable component of an embedded system. The MSP430F1222 belongs to the MSP430 family of mixed-signal microcontrollers, combining a low-power RISC core with analog and digital peripherals. Its 125 ns instruction cycle supports deterministic control timing, while its low-power operating modes are useful in battery-powered industrial instrumentation, portable measurement equipment, and embedded sensing systems.

The principal device resources include 4 KB of Flash for program storage, 256 B of SRAM for working data, an 8 MHz maximum clock rating, a 10-bit ADC, one USART, SPI, and timer functions. The 28-pin TSSOP package provides a compact surface-mount footprint for applications requiring mixed-signal measurement without a larger package. The industrial-grade ordering option is identified by the IPW suffix in the product listing.

The mixed-signal feature set makes the MSP430F1222IPW useful for applications that combine analog measurement with digital control. The ADC can be used for potentiometer, resistive-sensor, and process-monitoring inputs, while the USART and SPI interfaces provide paths to sensors, displays, transceivers, and data-logging equipment. The timer resources support periodic sampling, timing, and control functions within a low-power embedded platform.

Typical applications include industrial process monitors, portable environmental sensors, battery-operated test instruments, digital power controllers, and low-power embedded nodes. The 4 KB Flash limit makes firmware sizing and code efficiency important, while 256 B of SRAM requires careful buffering for data acquisition and communications.

When designing a board around the MSP430F1222IPW, follow the manufacturer pin-description and recommended application information for power, clock, reset, analog-input, and serial-interface routing. Place decoupling capacitors close to the supply pins and provide a stable reference and analog-input layout. Validate the ADC source impedance, acquisition timing, and firmware scaling before relying on measurements near the resolution limit.

This product page combines the manufacturer specifications, ordering information, pin and package constraints, interface details, and replacement guidance needed to evaluate the MSP430F1222IPW before committing it to an embedded design.

חלופות תחליף ישיר עבור MSP430F1222IPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MSP430F1222IPW (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Package, SRAM.

Texas Instruments
Architecture: 16-bit RISC
Package: 28-pin TSSOP (PW)
SRAM: 256 bytes
השווה עם MSP430F1222IPW →

MSP430F122IPW

✅ Drop-In
Texas Instruments
📦 TSSOP-28 (PW)
16-bit RISC mixed-signal microcontroller · 8 MHz · 4 KB · 4K x 8 bytes · 256 bytes · 22 pins · 16-bit timer · 1 analog comparator

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F1222IPW דירוגים מרביים ומאפיינים חשמליים

Product Type 16-bit mixed-signal microcontroller
תדר שעון מקסימלי 8 MHz
Architecture MSP430 CPU16, 16-bit RISC
Flash Memory 4 KB
SRAM 256 B
ADC Resolution 10 bit
ADC Quantity 1
Serial Interface SPI and UART/USART
Timer Resources Timer
מארז TSSOP-28 (PW)
מספר פינים 28 pins
סוג הרכבה Surface mount
Temperature Grade Industrial
Instruction Cycle Time 125 ns
Off Mode RAM Retention Current 0.1 µA
Power-Saving Modes 5

מדריך תצורת פינים של MSP430F1222IPW tssop-28 (pw)

תצורת פינים עבור MSP430F1222IPW (מארזת tssop-28 (pw)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת tssop-28 (pw) עבור MSP430F1222IPW

אין נתוני פריסת פינים מפורטים עבור MSP430F1222IPW.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MSP430F1222IPW מתאים עבור 6 יישוםs: Industrial Process Monitoring, Portable Environmental Sensors, Battery-Powered Test Instruments, Digital Power Control, Low-Power Data Loggers, Embedded Sensor Nodes.

🏭

Industrial Process Monitoring

The MSP430F1222IPW fits industrial process monitoring because its 8 MHz 16-bit core provides deterministic control timing while the 10-bit ADC measures analog process signals. A transmitter can condition a sensor into the ADC input range, use timer functions for periodic sampling, and transmit results through SPI or USART. The 4 KB Flash limit favors compact, event-driven firmware, while 256 B of SRAM requires careful buffering. Industrial qualification, calibration, and input protection should be verified against the application environment.

🧩

Portable Environmental Sensors

The MSP430F1222IPW is appropriate for portable environmental sensors that combine analog measurement with low-power serial reporting. Its 0.1 µA off-mode current with RAM retention, five power-saving modes, and wake-up from standby support duty-cycled operation. The 10-bit ADC can monitor resistive sensing elements, while SPI or USART links the result to a host or radio module. Firmware must budget the 256 B SRAM carefully and avoid continuous conversion when long battery life is the priority.

🔧

Battery-Powered Test Instruments

The MSP430F1222IPW can serve as the control and measurement core of a compact battery-powered test instrument. Its 8 MHz CPU16 architecture supports responsive user-interface and calculation tasks, while the 10-bit ADC handles basic analog measurements and the USART supports external equipment or a computer interface. The microcontroller operates from a mature MSP430 tool ecosystem and includes low-power modes for extending runtime between user actions. Accuracy depends on analog reference quality, calibration, and the selected front end.

⚡

Digital Power Control

The MSP430F1222IPW fits supervisory digital power-control tasks where a compact controller must monitor analog conditions and coordinate timing. The timer resources can implement switching intervals or fault-response sequences, the ADC can supervise current or voltage rails, and SPI or USART can connect to a power stage or system controller. Its 256 B SRAM limits complex buffering, so supervisory logic should use a partitioned memory plan. External power stages, drivers, magnetics, and protection components remain necessary for high-current designs.

📟

Low-Power Data Loggers

The MSP430F1222IPW can act as the acquisition controller in a low-power data logger. The ADC performs periodic measurements, timer functions establish sample intervals, and SPI can transfer batches to external nonvolatile storage. Because SRAM is limited to 256 B, the firmware should process or stream data instead of retaining large sample arrays. The device's standby and off-mode capabilities help reduce energy use between acquisition intervals, while the 4 KB Flash budget constrains buffering routines and logging features.

🌐

Embedded Sensor Nodes

The MSP430F1222IPW works well in embedded sensor nodes where a local sensor interface and compact communication logic are required. SPI can connect to a digital sensor, the USART can support a modem or host, and the 10-bit ADC can handle an auxiliary analog channel. Its low-power modes allow the node to sleep between measurements, while the 16-bit CPU provides enough arithmetic capability for local filtering and threshold decisions. Firmware size and RAM allocation should be reviewed early because 4 KB Flash and 256 B SRAM are restrictive.

What is the operating speed of MSP430F1222IPW?
The MSP430F1222IPW operates at up to 8 MHz and uses a 16-bit MSP430 CPU16 RISC architecture. According to the Texas Instruments MSP430F1222 product information, the device supports a 125 ns instruction cycle time. These figures make it suitable for deterministic embedded control, periodic sensor sampling, and compact low-power systems that do not require the processing capability of a higher-end MCU.
How much memory does MSP430F1222IPW have?
The MSP430F1222IPW provides 4 KB of Flash memory and 256 B of SRAM. The 4 KB Flash region stores the firmware, while 256 B of SRAM is available for variables, stack operations, acquisition buffers, and serial-interface working data. Because the SRAM capacity is modest, designs should avoid large local buffers and should use external storage or streamed processing when larger data sets are required.
Does MSP430F1222IPW include an ADC?
Yes, the MSP430F1222IPW includes one 10-bit ADC. According to the Texas Instruments product description, the mixed-signal MCU combines this ADC with 4 KB of Flash, 256 B of SRAM, timers, SPI, and a USART. The ADC supports embedded measurement functions such as resistive sensing, potentiometer monitoring, and simple industrial process-signal acquisition, provided the board uses suitable input conditioning and the firmware accounts for ADC resolution.
What serial interfaces are available on MSP430F1222IPW?
The MSP430F1222IPW provides SPI and UART/USART communication interfaces. According to the Texas Instruments MSP430F1222 product page, these interfaces are integrated into the 8 MHz mixed-signal MCU along with a 10-bit ADC and timer. SPI is suitable for short-distance sensor and peripheral connections, while the USART supports point-to-point serial communication where the electrical interface and protocol match.
What package does MSP430F1222IPW use?
The MSP430F1222IPW is supplied in a 28-pin TSSOP package with the PW package code. The Texas Instruments ordering page identifies the device as an 8 MHz MCU with 4 KB Flash, 256 B SRAM, timer, 10-bit ADC, and SPI/UART in a 28-pin TSSOP package. The surface-mount footprint is compact but requires careful fanout and clearance for a new PCB layout.
Is MSP430F1222IPW suitable for low-power applications?
The MSP430F1222IPW is designed for low-power embedded applications and includes five power-saving modes. A published feature summary identifies 0.1 µA off-mode current with RAM retention and wake-up from standby. The device is therefore appropriate for battery-operated sensing, portable instrumentation, and duty-cycled monitoring systems when the firmware keeps the processor and peripherals inactive during idle intervals.
Where can I download the MSP430F1222IPW datasheet?
The official MSP430F1222 datasheet and product documentation are available from the Texas Instruments product page at https://www.ti.com/product/MSP430F1222. The manufacturer page provides the electrical characteristics, pin descriptions, ordering information, and application details for the MSP430F1222 family. Use the manufacturer PDF for PCB pin assignments, power sequencing, clock configuration, and ADC electrical limits.
Where can I find the MSP430F1222IPW pinout?
The MSP430F1222IPW pinout is documented in the pin-description section of the manufacturer datasheet for the 28-pin PW TSSOP package. Texas Instruments identifies the package as TSSOP-28 in its ordering information. Use that table when assigning power, ground, reset, clock, analog-input, and serial-interface nets; do not infer pin functions from a similar device with a different package.
What is the best drop-in replacement for MSP430F1222IPW?
MSP430F122IPW is the closest verified same-family replacement candidate for MSP430F1222IPW, because both are listed as 28-pin TSSOP devices with an 8 MHz MSP430 CPU16, 4 KB Flash, and 256 B SRAM. Before release, verify the ADC, timer, clock, and peripheral assignments against the manufacturer pin and device tables. No cross-brand drop-in replacement was established by the available cross-reference results.
Can MSP430F122IPW replace MSP430F1222IPW?
MSP430F122IPW may be a pin-compatible candidate for MSP430F1222IPW, but it should not be treated as an automatic substitute without a firmware and electrical review. Both parts are listed with an 8 MHz MSP430 CPU16, 4 KB Flash, 256 B SRAM, and a 28-pin TSSOP package. Check the manufacturer device tables for differences in ADC implementation, timers, interrupts, and peripheral pin assignments before changing the BOM.
MSP430F1222IPW vs MSP430F122IPW - which is better for a new design?
MSP430F1222IPW is the stronger starting choice for a new design because the manufacturer specifically describes it with a 10-bit ADC, timer, SPI, and USART. MSP430F122IPW is a useful same-family drop-in candidate when existing MSP430F1222IPW software and hardware can be validated. The choice depends on verified peripheral compatibility, not only the shared 8 MHz core, 4 KB Flash, 256 B SRAM, and TSSOP-28 package.
When should I choose MSP430F1222IPW instead of MSP430F122IPW?
Choose MSP430F1222IPW when the design needs the exact MSP430F1222 mixed-signal feature set and a documented MSP430F1222 software baseline. MSP430F122IPW is most attractive for repair or cost-reduction projects that can prove pin, peripheral, and firmware compatibility. Both devices use the same broad resource class and package, but identical package dimensions alone do not establish complete software compatibility.
Is MSP430F1222IPW suitable for industrial sensors and instruments?
The MSP430F1222IPW is suitable for many industrial sensing and instrumentation functions because it combines an 8 MHz 16-bit core, 4 KB Flash, 256 B SRAM, a 10-bit ADC, timer, SPI, and USART in an industrial-grade TSSOP-28 option. Its limited memory should be checked against the firmware and data-buffer requirements. Analog front-end design, reference stability, and calibration determine measurement quality.
Where to buy MSP430F1222IPW online?
Use the Request a Quote form on this page to request MSP430F1222IPW availability, lot conditions, and current sourcing terms. The manufacturer identifies MSP430F1222IPW as an 8 MHz MCU with 4 KB Flash, 256 B SRAM, timer, 10-bit ADC, and SPI/UART in a 28-pin TSSOP package. Confirm the exact IPW ordering code and industrial-temperature requirement when submitting the request.
What is the price and lead time for MSP430F1222IPW?
Use the Request a Quote form on this page for the current MSP430F1222IPW price, stock position, and lead time. Quote requests should state the required quantity, 28-pin TSSOP package, and industrial temperature grade. The manufacturer product page identifies MSP430F1222IPW as the 8 MHz, 4 KB Flash, 256 B SRAM ordering option with 10-bit ADC, SPI, and USART.

נתוני עזר הנדסיים עבור MSP430F1222IPW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MSP430F1222IPW for new designs that require the documented MSP430F1222 feature set: an 8 MHz 16-bit core, 4 KB Flash, 256 B SRAM, a 10-bit ADC, timer, SPI, and USART in a 28-pin TSSOP package. It is especially appropriate for compact industrial monitoring, portable measurement, digital power supervision, and low-duty-cycle sensor nodes. MSP430F122IPW is the closest verified same-family replacement candidate because its listed CPU speed, memory capacities, architecture, and package align closely; use it for repair or cost-reduction projects only after checking ADC, timer, interrupt, and pin-assignment differences. No cross-brand drop-in alternative was established, and larger STM8, STM32, EFM32, or ATtiny devices in the site catalog should not be treated as drop-in replacements because their packages, memories, and peripheral assignments differ.

השוואה עם חלופות

פרמטר מוצר זה MSP430F122IPW
Manufacturer Texas Instruments Texas Instruments
Package TSSOP-28 (PW) TSSOP-28 (PW)
Maximum Clock Frequency 8 MHz 8 MHz
CPU Architecture 16-bit MSP430 CPU16 RISC 16-bit MSP430 CPU16 RISC
Flash Memory 4 KB 4 KB
SRAM 256 B 256 B

מבדילים עיקריים

  • Documented MSP430F1222 mixed-signal peripheral set (לעומתMSP430F122IPW)
  • Compact 28-pin mixed-signal integration (לעומתMSP430F122IPW)
  • Low-power operating options (לעומתMSP430F122IPW)

הערות תכנון

Use the manufacturer TSSOP-28 PW footprint and pin-description table when assigning nets. Place every supply decoupling capacitor immediately between the relevant device supply pin and ground. Keep sensitive analog inputs away from SPI and USART return-current paths, and provide a clean ground reference for the 10-bit ADC. The 4.4 mm TSSOP body and 0.65 mm lead pitch require adequate courtyard clearance and careful paste and reflow control.

Design the firmware around the five power-saving modes rather than treating low current as a single operating condition. Disable unused peripherals, stop the ADC between samples, and select the lowest clock setting that still meets control timing. The published 0.1 µA off-mode figure applies with RAM retention; total application consumption also includes the supply architecture, pull networks, sensors, and indicator circuits.

Validate ADC acquisition behavior with the actual source impedance rather than relying only on nominal 10-bit resolution. High source resistance increases settling time, while long analog traces can pick up noise from digital switching. Use a low-impedance buffer when required, reference the analog section to a quiet ground path, and calibrate offset and gain over the intended temperature range. Firmware averaging can reduce repeatable noise but does not correct an unsuitable analog front end.

Plan memory use before adding application features because MSP430F1222IPW has only 4 KB Flash and 256 B SRAM. Avoid recursive calls, large lookup tables, and deep call stacks, and confirm that startup code, interrupt handlers, communication buffers, and application logic fit the memory map. When substituting MSP430F122IPW, compare reset behavior, interrupt vectors, ADC channels, timer assignments, and peripheral multiplexing before releasing the alternative to production.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Use the manufacturer product page and orderable-part information for current environmental and quality declarations. The IPW ordering option is identified as industrial temperature grade, but that grade alone does not establish AEC-Q100 qualification.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MSP430F1222IPW MSP430F1222IPW datasheet MSP430F1222IPW datasheet pdf MSP430F1222IPW pinout MSP430F1222IPW schematic MSP430F1222IPW replacement MSP430F1222IPW equivalent MSP430F1222IPW vs MSP430F122IPW Texas Instruments MSP430F1222IPW MSP430F1222IPW price MSP430F1222IPW stock MSP430F1222 TSSOP-28 pinout MSP430F1222 application circuit

רכיבים ומונחים קשורים

Texas Instruments MSP430F1222IPW MSP430F122IPW MSP430 CPU16 16-bit RISC architecture mixed-signal microcontroller microcontroller embedded system semiconductor 8 MHz clock 4 KB Flash 256 B SRAM 10-bit ADC SPI USART timer TSSOP-28 PW package code surface mount low-power mode RAM retention industrial instrumentation sensor node process monitoring
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר