MSP430F2132IPW - 16MHz Low-Power MCU | Texas Instruments
MPN: MSP430F2132IPW ✓ פעילMSP430F2132IPW סקירה
A mixed-signal microcontroller integrates computational control with analog measurement functions on a single device. In the product hierarchy, the MSP430F2132IPW is a 16-bit RISC microcontroller, part of the MSP430 mixed-signal family, and intended for embedded control, sensor acquisition, and low-power portable systems. Its analog peripherals reduce the need for separate converters in many instrument designs, while its serial interface supports connection to external sensors, transceivers, and display controllers.
Key device attributes include a maximum CPU clock of 16 MHz, 8 KB of Flash for program storage, and 512 B of SRAM for working memory. A 10-bit ADC supports analog measurements, and an integrated comparator can perform threshold or low-power state-detection functions. One USCI provides I2C, SPI, or UART operation, while five low-power modes help optimize energy consumption in battery-powered equipment.
The MSP430 architecture emphasizes energy efficiency through a 16-bit RISC core, 16-bit registers, and constant generators that reduce instruction overhead. Five low-power operating modes allow firmware to disable unused peripherals and suspend the CPU during idle intervals. This makes the device suitable for portable measurement systems that spend substantial time waiting for a sensor, user input, or scheduled conversion rather than performing continuous computation.
Typical applications include battery-powered environmental sensors, compact industrial data loggers, portable instrumentation, smart sensor nodes, and low-power monitoring systems. The 10-bit ADC supports analog sensor conditioning, the comparator supports threshold detection, and the configurable USCI can connect with serial sensors or digital transceivers. The 28-pin TSSOP package also supports compact, board-space-conscious designs.
Designers should preserve the power-rail and decoupling requirements in the manufacturer datasheet, especially when the ADC is used. ADC accuracy depends on clean supply voltage, appropriate analog grounding, and careful routing of analog inputs away from digital switching nodes. Firmware should also use the documented low-power modes and peripheral clock controls rather than relying only on the CPU idle instruction.
This product page combines the exact MSP430F2132IPW ordering information with memory and peripheral characteristics, practical application guidance, package information, and a conservative drop-in alternative analysis. The alternatives preserve the 28-pin TSSOP footprint where technically supportable, while the comparison notes identify memory and peripheral differences that must be checked before redesigning an existing board.
חלופות תחליף ישיר עבור MSP430F2132IPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MSP430F2132IPW (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, Low-Power Modes, Mounting Type, Package, SRAM.
MSP430F2131IPW
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MSP430F2122IPW
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MSP430F2121IPW
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MSP430G2403IPW28
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MSP430F2132IPW דירוגים מרביים ומאפיינים חשמליים
| CPU Clock Speed | 16 MHz |
| CPU Architecture | 16-bit RISC |
| Register Width | 16 bit |
| Flash Memory | 8 KB |
| SRAM | 512 B |
| ADC Resolution | 10 bit |
| USCI Channel Count | 1 channel |
| Supported Serial Interfaces | I2C, SPI, UART |
| מתח אספקה | 2.5 V to 3.3 V |
| Low-Power Modes | 5 modes |
| טמפרטורת פעולה | -40 °C to +85 °C |
| מארז | 28-TSSOP (PW) |
| מספר פינים | 28 pins |
| סוג הרכבה | Surface mount |
| סטטוס מחזור חיים | Active |
| סטטוס RoHS | ROHS3 compliant |
| Lead Time | 12 weeks |
מדריך תצורת פינים של MSP430F2132IPW 28-tssop (pw)
תצורת פינים עבור MSP430F2132IPW (מארזת 28-tssop (pw)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MSP430F2132IPW.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MSP430F2132IPW מתאים עבור 6 יישוםs: Battery-Powered Environmental Sensor, Portable Industrial Data Logger, Portable Medical Measurement Module, Smart Sensor IoT Node, Compact Industrial Control Module, Precision Test and Measurement Instrument.
Battery-Powered Environmental Sensor
The MSP430F2132IPW fits a battery-powered environmental sensor because its 10-bit ADC can acquire analog measurements while five low-power modes reduce activity between samples. The 16 MHz MSP430 CPU provides sufficient control performance for conditioning, threshold evaluation, and data preparation, while the USCI can communicate through I2C, SPI, or UART. The 2.5 V to 3.3 V operating range suits compact sensor boards, although average current depends strongly on ADC duty cycle and selected sleep mode. Firmware should disable unused peripherals, avoid continuous ADC conversion when not required, and use the documented low-power transitions to maximize battery life.
מומלץ
Portable Industrial Data Logger
The MSP430F2132IPW is suitable for a portable industrial data logger where 8 KB of Flash, 512 B of SRAM, and a 10-bit ADC can support compact embedded acquisition. Its 16-bit RISC CPU handles sampling schedules, data packing, and event logging, while one USCI connects to an external serial memory or communications module. Five low-power modes help the logger spend most of its operating time waiting rather than processing continuously. Design the firmware around bounded buffers because 512 B of SRAM is modest, and use the Flash controller for buffered records rather than retaining large logs in RAM.
מומלץ
Portable Medical Measurement Module
The MSP430F2132IPW can serve as the controller in a portable medical measurement module that combines a low-power 16-bit CPU with a 10-bit ADC. The converter provides the basic resolution for sensing and diagnostic circuits, while the comparator can support threshold detection or a simple supervisory function. The configurable I2C, SPI, or UART USCI allows the module to communicate with a sensor front end or display controller. Because medical designs require strict validation, engineers should independently assess accuracy, noise, isolation, calibration, and applicable regulatory requirements rather than treating the MCU rating as system qualification.
מומלץ
Smart Sensor IoT Node
The MSP430F2132IPW is appropriate for a smart sensor IoT node that must acquire analog data and communicate with a nearby network interface without consuming excessive power. Its 8 KB of Flash supports compact application firmware, the 512 B SRAM supports short-term buffering, and the USCI supports I2C or SPI sensor links. Its five low-power modes are particularly useful for nodes that wake for a measurement and return to sleep. The design should prioritize local processing and aggregation to reduce radio traffic, while using the Request a Quote form to confirm lifecycle and long-term supply requirements.
מומלץ
Compact Industrial Control Module
The MSP430F2132IPW can act as the local controller in a compact industrial module with analog monitoring and serial communications. The 10-bit ADC supports process inputs, the comparator supports discrete threshold events, and the USCI can connect to a sensor, transceiver, or service interface. A 16 MHz MSP430 core provides deterministic control for actuator commands and status handling, while five low-power modes reduce consumption during idle periods. Layout should isolate analog routing from digital signals and follow the manufacturer grounding and decoupling guidance to preserve measurement quality near switching regulators.
מומלץ
Precision Test and Measurement Instrument
The MSP430F2132IPW fits a compact test and measurement instrument requiring local control, analog sampling, and low standby consumption. Its 16-bit RISC CPU supports measurement orchestration, the 10-bit ADC handles analog acquisition, and the USCI provides a flexible path to a host computer or external instrument. Five low-power modes help reduce heat and standby power in handheld equipment. For precision-sensitive measurements, calibrate the complete analog chain and verify ADC accuracy at the intended supply voltage; the MCU's nominal 10-bit resolution does not by itself guarantee system-level measurement uncertainty.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MSP430F2132IPW — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MSP430F2131IPW | MSP430F2122IPW | MSP430F2121IPW | MSP430G2403IPW28 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-TSSOP (PW) | 28-TSSOP (PW) | 28-TSSOP (PW) | 28-TSSOP (PW) | 28-TSSOP |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Flash Memory | 8 KB | 2 KB | 4 KB | 2 KB | 8 KB |
| Supply Voltage | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
מבדילים עיקריים
- Largest Flash capacity among the listed MSP430F2xx alternatives (לעומתMSP430F2131IPW)
- Twice the program memory of the lower-memory F2xx alternatives (לעומתMSP430F2122IPW)
- Documented mixed-signal resources for sensor-oriented designs (לעומתMSP430G2403IPW28)
הערות תכנון
Follow the Texas Instruments datasheet layout for decoupling, analog grounding, and exposed supply connections. Place the required input and output capacitors adjacent to their designated power pins, and route analog inputs away from UART, SPI, and I2C switching nodes. A 10-bit converter can still be impaired by high-frequency supply ripple or shared return-current paths even when its nominal resolution is suitable for the measurement.
Use the MSP430's documented low-power modes and peripheral clock controls to reduce average current. Disable unused USCI, ADC, comparator, and GPIO functions where practical, and avoid leaving the ADC continuously converting between sensor readings. With a 2.5 V to 3.3 V operating range, verify that every external sensor and communication device shares a compatible voltage domain or includes suitable level translation.
Confirm code size and RAM allocation before committing to the target: the MSP430F2132IPW has 8 KB of Flash and 512 B of SRAM. Avoid placing large sampling buffers or protocol libraries entirely in RAM, and account for stack depth, interrupt overhead, and linker placement. For ADC measurements, follow the documented sampling sequence and averaging procedure rather than reading a new conversion result at the earliest possible instant.
Preserve the MSP430F2132 pin assignments exactly when evaluating a replacement. The USCI pins can support alternate peripheral functions, so changing the multiplexed function can move I2C, SPI, UART, timer, or comparator signals to different pins. Check the complete pin-description table, supply pins, ground pins, analog channels, and package orientation before authorizing a drop-in substitution.
מידע על תאימות
The product listing identifies MSP430F2132IPW as ROHS3 compliant. No specific automotive qualification or separate halogen-free statement was identified for this ordering code.