MSP430F4616IPZ - 16-Bit 8MHz MCU with 92KB Flash | TI
MPN: MSP430F4616IPZ ✓ פעילMSP430F4616IPZ סקירה
A microcontroller is a programmable semiconductor containing a CPU, memory, and peripherals on one integrated circuit. The MSP430 belongs to the ultra-low-power MCU category, combining a 16-bit RISC CPU, 16-bit registers, and five low-power modes. This hierarchy places it among embedded processors designed for portable measurement, industrial instrumentation, and control systems where energy efficiency and integrated analog functions influence system size.
The MSP430F4616IPZ provides 92 KB of flash for firmware and 4 KB of SRAM for working data. Its 12-bit ADC supports precision signal acquisition, while the comparator supports threshold-based monitoring. DMA reduces interrupt overhead during data movement, and the I2C, SPI, and UART interfaces cover common sensor, display, and communication links. The integrated 160-segment LCD controller reduces external display-driver requirements in instrument-panel designs.
Texas Instruments describes the MSP430 family architecture around a powerful 16-bit RISC CPU, 16-bit registers, constant generators, and five low-power modes optimized for extended battery life in portable measurement equipment. The target operates from a 3.3 V supply according to its product listing. Its 100-LQFP package provides 100 external pins, making the device particularly suitable for designs requiring broad analog, digital, and LCD connectivity.
Typical uses include industrial process transmitters, portable environmental monitors, energy-measurement instruments, medical monitoring equipment, battery-powered data loggers, and human-machine interface controllers. The combination of embedded LCD control, serial interfaces, ADC capability, and low-power operating modes allows a compact design without requiring a separate ADC and display controller.
PCB implementation should preserve short analog paths around the ADC inputs and provide clean supply decoupling. Confirm the complete 100-pin signal assignment, exposed package details, clocking configuration, and programming interface in the manufacturer datasheet before layout release. The software plan should also define which low-power mode is retained during idle periods and how interrupts wake the device.
This product page consolidates the exact ordering information, core memory and interface specifications, qualified comparison points, application guidance, and practical design considerations engineers need when evaluating the MSP430F4616IPZ for an embedded mixed-signal design.
חלופות תחליף ישיר עבור MSP430F4616IPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MSP430F4617IPZ
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MSP430F4618IPZ
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MSP430F4619IPZ
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MSP430FG4616IPZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MSP430F46181IPZR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MSP430F4616IPZ דירוגים מרביים ומאפיינים חשמליים
| CPU Architecture | 16-bit RISC |
| תדר שעון מקסימלי | 8 MHz |
| Flash Memory | 92 KB |
| SRAM | 4 KB |
| Additional Flash Information Area | 256 bytes |
| ADC Resolution | 12 bits |
| Comparator | Integrated |
| DMA Controller | Integrated |
| Serial Interfaces | I2C, SPI, and UART |
| LCD Segments | 160 segments |
| מתח אספקה | 3.3 V |
| Low-Power Modes | 5 modes |
| Register Width | 16 bits |
| מארז | 100-pin LQFP, 14 x 14 mm |
| סוג הרכבה | Surface mount |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
מדריך תצורת פינים של MSP430F4616IPZ 100-pin lqfp, 14 x 14 mm
תצורת פינים עבור MSP430F4616IPZ (מארזת 100-pin lqfp, 14 x 14 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MSP430F4616IPZ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MSP430F4616IPZ מתאים עבור 6 יישוםs: Portable Environmental Monitor, Industrial Process Transmitter, Battery-Powered Data Logger, Medical Monitoring Instrument, Energy Measurement Instrument, Human-Machine Interface Controller.
Portable Environmental Monitor
The MSP430F4616IPZ suits portable environmental monitoring because its 12-bit ADC can acquire sensor outputs while the comparator can perform threshold decisions without continuous processor polling. Its 92 KB of flash accommodates application firmware and data structures, while 4 KB of SRAM supports acquisition and communication buffers. The integrated I2C and SPI interfaces connect environmental sensors and memory devices, and UART can report results to a host. Five low-power operating modes are valuable when the instrument spends substantial time between measurements. Because the MCU also includes a 160-segment LCD controller, a field unit can display live readings and status information without a separate display controller. Board partitioning should keep analog sensor traces away from switching nodes and place the ADC reference and supply bypass components close to their associated pins.
מומלץ
Industrial Process Transmitter
The MSP430F4616IPZ is suitable for an industrial process transmitter that must convert a sensor signal into a reliable digital or serial output. The 12-bit ADC supports the measurement front end, the comparator can provide a fast limit-detection function, and DMA can transfer acquisition data with reduced processor intervention. Its 3.3 V supply and 8 MHz clock support compact, mixed-signal instrumentation, while I2C, SPI, and UART provide options for local configuration, isolated communication, or sensor interfaces. The 160-segment LCD driver can support local diagnostics in configurable equipment. Layout should isolate the analog input from digital clocking and communication traces, provide a stable reference arrangement, and include filtering appropriate to the selected sensor. Firmware should also define watchdog, fault-state, and low-power behavior for long-duration field operation.
מומלץ
Battery-Powered Data Logger
The MSP430F4616IPZ works well in a battery-powered data logger because the MSP430 architecture provides five low-power modes alongside a 16-bit RISC CPU and 8 MHz clock. Engineers can retain full processing capability during a measurement event and place the device into a lower-power state between samples to reduce system energy consumption. The 92 KB flash stores firmware and logged parameters, while 4 KB of SRAM provides space for staged samples. DMA can move ADC results without requiring every conversion to pass through a CPU interrupt, and UART supports periodic synchronization with a host or radio. The LCD controller may provide local feedback in portable instruments. The power budget should include the sensor, analog front end, communications radio, and regulator rather than attributing total current consumption to the MCU alone.
מומלץ
Medical Monitoring Instrument
The MSP430F4616IPZ can serve as the control and acquisition processor in a portable medical monitoring instrument where a compact display, low-power operation, and mixed-signal integration are important. The 12-bit ADC acquires conditioned sensor signals, the comparator supports threshold and alarm functions, and DMA can streamline sample movement. I2C and SPI accommodate sensors, memory, and configuration components, while UART supports a host or secure communications module. The integrated 160-segment LCD driver simplifies local numerical or status displays and can reduce board area. A medical design still requires application-specific validation of electrical safety, measurement accuracy, isolation, firmware controls, and regulatory documentation; component selection alone does not establish compliance. The analog section should be carefully partitioned from communication circuitry, with short guarded traces and stable reference and bypass networks.
מומלץ
Energy Measurement Instrument
The MSP430F4616IPZ is appropriate for a compact energy-measurement instrument that must sample waveforms, calculate values, and present results locally. The 8 MHz 16-bit RISC CPU supports real-time control and measurement algorithms, while the 12-bit ADC provides the required conversion resolution for many sensor and rectified-measurement front ends. DMA improves throughput when capturing multiple samples, and the comparator can identify thresholds or switching events. The 92 KB flash stores routines and calibration data, and the 4 KB SRAM can hold working measurements. I2C and SPI support external converters, memories, and calibration components. The 160-segment LCD driver enables local numerical readouts without a separate display controller. Precision analog layout, controlled clocking, and carefully selected external filtering remain central to achieving repeatable energy measurements.
מומלץ
Human-Machine Interface Controller
The MSP430F4616IPZ can act as the central controller for a human-machine interface because it combines a 160-segment LCD driver with 92 KB of flash, 4 KB of SRAM, and multiple serial interfaces. Buttons, rotary encoders, and status indicators can be managed by the MCU while I2C or SPI connects a display or configuration memory. The 12-bit ADC and comparator support panel diagnostics or analog controls, and the UART provides a straightforward link to a higher-level controller. Its 100-LQFP package exposes a broad pin set for human-interface functions in industrial panels and portable instruments. Firmware should define debouncing, display refresh, fault indication, and safe behavior during startup. Keep LCD and switch lines away from sensitive analog traces where possible, and provide local decoupling at the device supply pins.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MSP430F4616IPZ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MSP430F4617IPZ | MSP430F4618IPZ | MSP430F4619IPZ | MSP430FG4616IPZ | MSP430F46181IPZR |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
מבדילים עיקריים
- Integrated display and acquisition resources (לעומתMSP430F4617IPZ)
- Lower memory use for general mixed-signal designs (לעומתMSP430FG4616IPZ)
- Compact 100-pin integration (לעומתMSP430F46181IPZR)
הערות תכנון
Reserve the 100-pin LQFP footprint and verify every signal against the exact device pin-description table before routing. The ADC, comparator, LCD, and serial interfaces can share package pins, so changing the target to another MSP430F461x member may alter peripheral assignments even when the body size and lead pitch match. Keep ADC inputs and reference routing away from UART, SPI clock, and LCD drive traces, and place input and output decoupling capacitors adjacent to the relevant supply pins.
Design the 3.3 V rail for the MCU and all attached analog circuitry, including startup margin for peripheral devices. Estimate the average current from active operation, the selected low-power mode, LCD loading, ADC sampling, and communication activity rather than using the CPU clock frequency alone. Enable unused peripherals and unused port pins to reduce leakage, and verify that the regulator can meet both active-current peaks and the voltage tolerance required by the selected operating mode.
Treat the ADC reference and analog input network as a sensitive mixed-signal section. Use a dedicated local bypass arrangement for the reference, keep the reference trace short, and return analog ground currents away from digital switching paths. If an internal resistor, comparator, or DAC is used for signal conditioning, calculate its effective resistance and bandwidth across the operating temperature range. The MSP430FG4616IPZ is the relevant family choice when integrated DAC or operational-amplifier resources are required by the signal chain.
Do not treat a shared 100-LQFP footprint as proof that firmware is portable between family members. Check flash size, SRAM capacity, interrupt-vector placement, ADC channels, comparator inputs, LCD segment allocation, serial-instance multiplexing, and clock configuration. After a substitution, rebuild the project for the exact ordering code, verify all peripheral assignments, and run reset, brownout, watchdog, low-power wake, and full I2C, SPI, UART, ADC, comparator, DMA, and LCD tests before production release.
מידע על תאימות
The manufacturer product pages identify the device and technical features, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is shown in the product information available for this order code.