Texas Instruments

PCM1798DB - 24-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1798DB ✓ פעיל
4 mAp-p Id 28-lead SSOP Package 200 kHz Speed
כמות הזמנה מינימלית: 1 |

PCM1798DB סקירה

Texas Instruments PCM1798DB is a 24-bit stereo digital-to-analog converter with a sampling rate of 200 kHz, balanced current outputs, and a 28-lead SSOP package. The monolithic CMOS device uses TI advanced segment DAC architecture to provide strong dynamic performance and improved tolerance to clock jitter, making it suitable for high-fidelity audio conversion and other precision signal-generation systems.

An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage or current waveform. The PCM1798 belongs to the DAC and data-converter hierarchy within integrated circuits and broader signal-processing semiconductors. Unlike a digital-to-analog function implemented in a general-purpose codec, this device focuses on stereo conversion, digital filtering, clocking, and support circuitry for high-quality audio outputs.

The converter provides 24-bit resolution, a 200 kHz maximum sampling rate, and differential current output. Its dynamic range reaches 123 dB, while total harmonic distortion plus noise is specified at 0.0005%. The digital filter offers 98 dB stop-band attenuation and pass-band ripple of ±0.0002 dB. An eight-times oversampling architecture supports these filtering and conversion characteristics.

System-clock operation includes 128-times, 192-times, 256-times, 384-times, 512-times, and 768-times sampling rates with autodetection. Supporting these clock ratios allows the PCM1798DB to interface with a broad range of digital audio transports while adapting to the incoming audio rate. Balanced current outputs support direct-to-differential output-stage designs, including transformer-coupled and active analog output paths.

Typical applications include high-resolution CD and DVD audio players, professional digital mixing consoles, digital broadcast monitoring equipment, high-end headphone and line-level converters, studio preamplifiers, and dedicated stereo digital-to-analog decoding modules. Its 28-lead SSOP package also supports board layouts that prioritize mature through-hole assembly and serviceability.

PCB design should keep digital-clock and audio-data routing away from the analog output network. The output stage must convert the converter's differential current into a usable analog voltage, so component selection, grounding, and channel balance are as important as the DAC itself. Review the manufacturer's pin description and application information before assigning tracks or choosing external circuitry.

This product record combines the manufacturer's architecture and performance information with practical considerations for output-stage design, clocking, filtering, and PCB implementation. It also distinguishes verified functions from parameters that require design confirmation, helping engineers evaluate the PCM1798DB without confusing headline resolution with complete end-to-end audio performance.

חלופות תחליף ישיר עבור PCM1798DB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM1798DB (אותו גורם צורה וטביעת רגל) — שונים ב Package, Dynamic Range, Maximum Sampling Rate, Resolution, THD+N.

Texas Instruments
Dynamic Range: 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo
Maximum Sampling Rate: 192 kHz
THD+N: 0.0004% typical
השווה עם PCM1798DB →
Texas Instruments
Package: 28-pin SSOP
Maximum Sampling Rate: 200 kSPS
Resolution: 32 bit
השווה עם PCM1798DB →

PCM1794DB

✅ Drop-In
Texas Instruments
📦 28-lead SSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · Advanced segment DAC · Balanced current outputs · I2S, PCM, and left-justified · 5 V tolerant · VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM1798DB דירוגים מרביים ומאפיינים חשמליים

Converter Type Stereo audio digital-to-analog converter
Architecture Advanced segment DAC
רזולוציה 24 bit
Maximum Sampling Frequency 200 kHz
Nominal Audio Sampling Frequency 192 kHz
Dynamic Range 123 dB
THD+N 0.0005%
סוג פלט Differential current output
Differential Output Current 4 mAp-p
Digital Filter Oversampling 8 times
Digital Filter Stop-Band Attenuation -98 dB
Digital Filter Pass-Band Ripple ±0.0002 dB
Supported Sampling Frequency Range 10 kHz to 200 kHz
Supported System Clock Ratios 128fS, 192fS, 256fS, 384fS, 512fS, or 768fS with autodetect
Process Technology CMOS
מארז 28-lead SSOP
סוג הרכבה Surface mount
Pin Compatibility Compatible with PCM1794 pin assignment

מדריך תצורת פינים של PCM1798DB 28-lead ssop

תצורת פינים עבור PCM1798DB (מארזת 28-lead ssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-lead ssop עבור PCM1798DB

אין נתוני פריסת פינים מפורטים עבור PCM1798DB.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM1798DB מתאים עבור 6 יישוםs: High-Resolution Audio DAC, Professional Digital Mixing Console, Studio Monitor Converter, Digital Broadcast Monitoring, Headphone Amplifier Front End, High-End CD Player.

🎧

High-Resolution Audio DAC

The PCM1798DB fits a dedicated stereo audio converter because it provides 24-bit resolution, sampling rates from 10 kHz to 200 kHz, and 123 dB dynamic range. Place the converter behind a compatible digital audio interface and use its 4 mAp-p differential current outputs to drive a carefully designed balanced I-to-V stage. The result is a flexible source path for high-resolution CD, DVD, and digital-audio content.

🎚️

Professional Digital Mixing Console

A professional digital mixing console can use the PCM1798DB for stereo monitoring or auxiliary conversion where 24-bit fidelity and a 200 kHz maximum sampling rate are useful. Its supported 128fS through 768fS system-clock ratios with autodetection simplify integration with digital transport clocks. The balanced output architecture is particularly appropriate for low-noise analog monitoring and signal-routing stages.

🔊

Studio Monitor Converter

The PCM1798DB is appropriate for a stereo studio-monitor conversion path when the system needs balanced outputs and high dynamic range from a 24-bit digital source. Its differential 4 mAp-p current output feeds an active or transformer-based I-to-V network, allowing channel balance and grounding to be handled in the analog domain. A 200 kHz sampling ceiling supports high-rate studio workflows.

📻

Digital Broadcast Monitoring

PCM1798DB can serve as the stereo monitoring DAC in digital broadcast, mastering, and distribution equipment that requires conversion from 24-bit digital audio to balanced analog monitoring signals. The device accepts a broad range of system-clock ratios and supports sampling frequencies up to 200 kHz. Low-jitter clocking and controlled analog grounding remain essential for dependable monitoring performance.

🎵

Headphone Amplifier Front End

The PCM1798DB can supply the converter stage ahead of a headphone amplifier when a discrete, balanced stereo signal path is preferred. Its differential outputs support an active I-to-V network before the gain stage, helping preserve channel symmetry and reduce common-mode pickup. Headphone systems should provide clean converter power, stable reference voltage, and carefully separated return paths.

💿

High-End CD Player

PCM1798DB is well suited to a high-end CD-player architecture that separates digital transport decoding from premium analog conversion. The 24-bit converter supports the full range of CD sampling rates and can also accommodate higher-rate digital sources up to 200 kHz. Balanced current outputs feed a dedicated analog stage, while automatic system-clock detection simplifies control of multiple transport clock ratios.

What is the PCM1798DB?
The PCM1798DB is a 24-bit stereo audio digital-to-analog converter manufactured by Texas Instruments. According to the manufacturer product page, it uses advanced segment DAC architecture, supports sampling frequencies from 10 kHz to 200 kHz, and provides balanced differential current outputs. The device is packaged in a 28-lead SSOP and includes digital-filter and system-clock support circuitry.
What are the key specifications of PCM1798DB?
The PCM1798DB provides 24-bit resolution, a maximum sampling rate of 200 kHz, 123 dB dynamic range, and 0.0005% THD+N. According to Texas Instruments, its digital filter delivers 98 dB stop-band attenuation and ±0.0002 dB pass-band ripple, while the differential output produces 4 mAp-p current. The device uses a 28-lead SSOP package.
What is the sampling frequency range of PCM1798DB?
The PCM1798DB supports sampling frequencies from 10 kHz to 200 kHz. According to the Texas Instruments product page, the converter also accepts system clocks at 128, 192, 256, 384, 512, or 768 times the sampling frequency with autodetection. These settings allow interface-clock selection according to the digital audio source and system architecture.
Where can I download the PCM1798DB datasheet PDF?
The official PCM1798 datasheet and supporting technical information are available from the Texas Instruments PCM1798 product page at https://www.ti.com/product/PCM1798. The page also provides the part-specific ordering information for PCM1798DB. Use the manufacturer's pin-description and application material when assigning PCB traces or designing the balanced analog output stage.
Where can I find the PCM1798DB pinout?
The PCM1798DB pin assignment is documented in the manufacturer datasheet available through the official PCM1798 product page. The device uses a 28-lead SSOP package, and its pin assignment is compatible with the PCM1794. Use the package drawing and pin-description table to map supply, ground, digital-interface, clock, and analog-output connections before PCB release.
What can replace the PCM1798DB?
The closest documented drop-in candidate is the Texas Instruments PCM1794DB, whose pin assignment is compatible with the PCM1798 according to the manufacturer product page. Its suitability still depends on the required sampling rate, output-current amplitude, digital-filter response, clocking, and analog output-stage topology. Verify every system requirement before replacing PCM1798DB.
Is PCM1794DB a drop-in replacement for PCM1798DB?
The PCM1794DB is a documented same-package candidate because the Texas Instruments PCM1798 page states that its pin assignment is compatible with the PCM1794. It is not an exact functional clone: output current and digital-filter performance differ. Treat the PCM1794DB as a drop-in candidate only after checking the audio output stage, sampling rate, clock ratios, and filter requirements.
What is the best Texas Instruments equivalent for PCM1798DB?
The best documented Texas Instruments candidate is the PCM1794DB because the manufacturer identifies the PCM1798 pin assignment as compatible with the PCM1794. It shares the 28-lead SSOP format and supports a closely related high-resolution stereo DAC architecture. The known differences in output current and digital-filter behavior must be reviewed against the target circuit.
When should I choose PCM1798DB over PCM1794DB?
Choose PCM1798DB when the design specifically calls for its documented 200 kHz maximum sampling rate, 4 mAp-p differential output current, and stated digital-filter characteristics. Choose the PCM1794DB only after confirming that its output-current and filter differences remain acceptable. Both use a compatible 28-lead SSOP arrangement, so the analog and digital layout can potentially be reused.
Is PCM1798DB suitable for high-resolution audio converters?
Yes, PCM1798DB is suitable for high-resolution stereo audio conversion because it offers 24-bit resolution, up to 200 kHz sampling, 123 dB dynamic range, and 0.0005% THD+N. Actual end-to-end performance also depends on the source clock, digital interface, power supply, balanced output stage, analog filtering, and PCB grounding.
How does clock jitter affect PCM1798DB performance?
Clock jitter can degrade digital-to-analog conversion by adding timing uncertainty to the sampling and reconstruction process. According to Texas Instruments, the PCM1798 advanced segment DAC architecture provides improved tolerance to clock jitter. Designers should still use short, properly terminated clock routing and a low-jitter source because board-level clock noise can limit real-world audio performance.
What output stage does PCM1798DB require?
PCM1798DB uses differential current outputs rather than directly delivering a finished line-level voltage. Its documented differential output is 4 mAp-p, so an external I-to-V conversion stage is required for conventional balanced or single-ended audio. Transformer-coupled and active voltage-feedback stages are common implementation approaches, with component values selected from the manufacturer application guidance.
Where can I buy PCM1798DB online?
Use the Request a Quote form on this page to request PCM1798DB availability, current commercial terms, and a quotation. The form provides a single purchasing path without relying on changing distributor listings. For engineering review, the official manufacturer product page at https://www.ti.com/product/PCM1798/part-details/PCM1798DB confirms the ordered device and package information.
What is the price of PCM1798DB?
Current PCM1798DB pricing depends on quantity, order configuration, and commercial terms. Submit the Request a Quote form on this page with your required quantity and delivery location to receive current pricing. Because commercial prices change with market and order conditions, the quote form provides a fresher transaction reference than static product text.
What is the lead time and stock status for PCM1798DB?
Request the current lead time, minimum order quantity, and stock status through the Request a Quote form on this page. The form should be completed with the required quantity, package quantity, and destination so the commercial response reflects the actual order. Texas Instruments lists PCM1798DB under the PCM1798 family on its official product page.
Does PCM1798DB support RoHS and automotive qualification?
The manufacturer product page confirms the PCM1798 family and PCM1798DB ordering information, but the available technical listing does not explicitly state the RoHS, REACH, or AEC-Q100 status of this exact orderable device. Confirm those compliance attributes in the manufacturer product documentation or current declaration before releasing an automotive, medical, or regulated production design.

נתוני עזר הנדסיים עבור PCM1798DB — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM1798DB when the design requires a 24-bit stereo DAC with sampling capability up to 200 kHz, 123 dB dynamic range, 0.0005% THD+N, and balanced 4 mAp-p current outputs. Its eight-times oversampling filter and broad system-clock support suit high-resolution audio and professional monitoring systems. The documented PCM1794DB pin compatibility makes it the closest identified drop-in candidate when PCM1798DB is unavailable, but its output-current and digital-filter characteristics differ and must be checked against the existing circuit. This device is appropriate for new designs that can implement the required differential I-to-V output stage and careful clock and ground layout. It is less suitable when a finished single-ended voltage output is required without external conversion circuitry.

השוואה עם חלופות

פרמטר מוצר זה PCM1794DB
Package 28-lead SSOP 28-lead SSOP
Brand Texas Instruments Texas Instruments
Resolution 24 bit 24 bit
Pin Compatibility Compatible with PCM1794 pin assignment Compatible with PCM1798 pin assignment

מבדילים עיקריים

  • Higher documented maximum sampling rate (לעומתPCM1794DB)
  • Documented differential output-current capability (לעומתPCM1794DB)
  • Specified dynamic range and distortion performance (לעומתPCM1794DB)
  • Broad system-clock support with autodetection (לעומתPCM1794DB)

הערות תכנון

Route the digital audio data and system-clock nets on the logic side of the board, while keeping the analog output network close to the converter pins. Avoid routing clock traces parallel with the differential output conductors, and use a continuous ground reference beneath the analog section. The PCM1798DB provides differential current outputs, so balanced routing helps reduce common-mode noise pickup.

Treat the system clock as a high-quality signal path. Keep clock traces short, use controlled impedance, minimize via and stub effects, and terminate the source according to the digital-interface requirements. The advanced segment DAC architecture improves clock-jitter tolerance, but it cannot correct excessive jitter introduced by the source clock or PCB return path.

Do not connect the PCM1798DB differential current outputs directly to a conventional voltage input without an I-to-V conversion stage. The documented output is 4 mAp-p, and the external network determines voltage gain, output impedance, frequency response, and channel balance. Confirm the target impedance, output swing, and transformer or active-stage requirements before finalizing component values.

Separate analog and digital supply paths where the board architecture permits, and place local high-frequency bypass capacitors at the converter supply pins. Confirm the allowable supply range, reference requirements, and power-up sequence in the manufacturer documentation before selecting regulators. Reference-voltage quality and supply noise can degrade the converter's noise and distortion performance.

Preserve symmetrical component placement and trace lengths across the two output channels. Match resistor networks and pair output-stage devices by thermal characteristics to reduce channel imbalance. When using a transformer-coupled output, account for core nonlinearity, leakage inductance, and the interaction between transformer loading and the converter's current-output network.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available manufacturer listing does not explicitly state the compliance attributes for the exact PCM1798DB orderable part.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

pcm1798db dac PCM1798DB datasheet PCM1798DB datasheet pdf PCM1798DB pinout PCM1798DB specifications Texas Instruments PCM1798DB PCM1798DB 24-bit stereo DAC PCM1798DB 200 kHz sampling PCM1798DB SSOP package PCM1798DB equivalent PCM1798DB replacement PCM1798DB vs PCM1794DB PCM1798DB price PCM1798DB stock PCM1798DB application circuit

רכיבים ומונחים קשורים

Texas Instruments PCM1798DB PCM1798 PCM1794DB 24-bit DAC stereo digital-to-analog converter audio DAC data converter integrated circuit semiconductor advanced segment DAC architecture differential current output THD+N dynamic range system clock clock jitter eight-times oversampling digital filter I-to-V conversion 28-lead SSOP SSOP package family surface-mount package high-resolution audio digital audio interface S-parameter
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר