PCM1850PJT - 24-Bit 96 kHz Stereo ADC | Texas Instruments
MPN: PCM1850PJT ✓ פעילPCM1850PJT סקירה
An audio ADC is a data-conversion IC that converts analog sound signals into digital words for storage, transmission, mixing, or signal processing. It belongs to the ADC and DAC product family, then to data-converter ICs and semiconductor components. The PCM1850 combines an analog input multiplexer, programmable-gain stage, and stereo delta-sigma converter in one device, reducing the number of external switching and gain-control components needed for multiple-input audio equipment.
The converter supports 24-bit resolution and sampling rates up to 96 kHz. Its 6 × 2 single-ended input arrangement allows twelve analog input positions to be routed through two internal channels. Maximum input level is 2.4 Vrms, while minimum input resistance is 50 kΩ. The programmable-gain amplifier provides 23 gain selections across the -11 dB to +11 dB range because the range contains 22 dB divided into 0.5 dB steps.
The PCM1850PJT uses a serial peripheral interface for digital data and control, as identified by the manufacturer listing for this exact orderable part. Its multiplexed output allows the converter to service selected analog inputs in a defined sequence, making the device suitable for multichannel sound-card, mixer, recorder, broadcast, and instrumentation front ends. The integrated multiplexer and PGA keep the analog routing architecture compact while supporting gain adjustment in software.
Common uses include stereo audio capture, microphone and line-level preamp interfacing, multichannel mixers, digital recording equipment, broadcast consoles, and industrial monitoring systems. When laying out the PCB, place input, reference, and decoupling connections according to the manufacturer datasheet to minimize analog noise pickup and preserve converter performance.
The key design tradeoff is board complexity versus functional integration. PCM1850PJT combines twelve single-ended input positions, two conversion channels, and programmable gain in one package, but the design must still account for analog grounding, reference decoupling, clocking, digital-interface timing, and input-level limits. This page combines the exact part specifications, practical application guidance, comparison points, and sourcing information needed to evaluate the converter.
חלופות תחליף ישיר עבור PCM1850PJT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
PCM1851PJT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1851APJT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1850PJT דירוגים מרביים ומאפיינים חשמליים
| Device Type | 24-bit stereo audio analog-to-digital converter |
| רזולוציה | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Conversion Architecture | Delta-sigma |
| Number of Conversion Channels | 2 channels |
| Input Multiplexer Configuration | 6 × 2-channel single-ended |
| Multiplexed Output | Supported |
| Maximum Input Level | 2.4 Vrms |
| Minimum Input Resistance | 50 kΩ |
| PGA Gain Range | -11 dB to +11 dB |
| PGA Gain Step | 0.5 dB per step |
| Digital Interface | SPI |
| מארז | 32-pin TQFP, 7 × 7 mm |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של PCM1850PJT 32-pin tqfp, 7 × 7 mm
תצורת פינים עבור PCM1850PJT (מארזת 32-pin tqfp, 7 × 7 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור PCM1850PJT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PCM1850PJT מתאים עבור 6 יישוםs: Stereo Audio Capture, Multichannel Audio Mixer, Broadcast and Recording Console, Microphone Preamp Interface, Industrial Sound Monitoring, Digital Audio Interface Module.
Stereo Audio Capture
PCM1850PJT fits stereo sound-card and digital-recording front ends because it converts two analog channels at up to 24-bit resolution and 96 kHz sampling. The 6 × 2-channel single-ended multiplexer lets the system select among six inputs for each stereo channel rather than adding a separate analog switch. The programmable gain range of -11 dB to +11 dB in 0.5 dB steps supports software-controlled level adjustment. Designers should still preserve balanced signal paths, maintain common-mode limits, and keep the maximum input level at or below 2.4 Vrms to avoid clipping.
מומלץ
Multichannel Audio Mixer
The PCM1850PJT is well suited to compact mixer and monitoring products that must digitize several sound sources. Its 6 × 2-channel multiplexer provides twelve single-ended input positions for sequential conversion of up to six source pairs, while the integrated PGA offers 23 gain settings from -11 dB to +11 dB. This can reduce analog routing hardware in the signal path. The design must establish the scanning order, synchronize channel selection with the serial interface, and provide clean reference and ground connections according to the manufacturer application guidance.
מומלץ
Broadcast and Recording Console
PCM1850PJT supports broadcast, recording, and production-console modules that combine multiple analog sources with high-resolution digital audio. Its 24-bit, 96 kHz conversion capability provides ample resolution for general professional audio workflows, while the six-input-per-side multiplexer supports economical channel selection. The PGA can absorb a bounded amount of source-level variation without an external analog gain stage. Signal integrity remains critical: maintain symmetric input routing, provide the specified reference network, isolate converter clock and digital return paths, and keep analog traces short.
מומלץ
Microphone Preamp Interface
PCM1850PJT can serve as the conversion element in a microphone-preamplifier interface because it combines stereo delta-sigma conversion with adjustable analog gain. The -11 dB to +11 dB PGA range is useful for normalizing source amplitudes before digital processing, while the 50 kΩ minimum input resistance and 2.4 Vrms maximum input level constrain the external microphone and line-conditioning network. The converter should be preceded by suitable low-noise amplification when the source requires greater gain than the on-chip PGA provides.
מומלץ
Industrial Sound Monitoring
PCM1850PJT fits industrial sound-monitoring equipment that must capture multiple analog sensor or audio channels through a compact converter. The 6 × 2-channel multiplexer allows multiple single-ended sources to share the stereo conversion path, and the PGA can apply programmable attenuation or gain before digitization. This architecture is useful for compact instrumentation where panel space and external component count matter. The implementation must account for source-specific bandwidth, acceptable aliasing, input common-mode range, and synchronization between mux selection and sample acquisition.
מומלץ
Digital Audio Interface Module
PCM1850PJT is appropriate for modular digital-audio interfaces requiring stereo ADC channels, selectable analog inputs, and a serial digital connection. Its 24-bit resolution and 96 kHz maximum rate support high-quality capture, while the integrated mux and PGA reduce the need for a separate routing IC and gain-control network. The host processor must configure the SPI interface and manage clocks and reset correctly. PCB layout should separate sensitive analog inputs from SPI lines, place bypass components near the supply pins, and follow the reference-ground layout shown in the manufacturer documentation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PCM1850PJT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PCM1851PJT | PCM1851APJT |
|---|---|---|---|
| Package | 32-TQFP (7x7) | 32-TQFP (7x7) | 32-TQFP (7x7) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
מבדילים עיקריים
- Integrated twelve-position single-ended input multiplexer (לעומתPCM1851PJT)
- Fine-grained onboard gain adjustment (לעומתPCM1851APJT)
- High-resolution audio conversion with flexible routing (לעומתPCM1851PJT)
הערות תכנון
Route the six single-ended inputs for each conversion channel as matched, short analog paths and keep them away from the SPI clock, data, and reset nets. The 50 kΩ minimum input resistance makes source impedance relevant to level and settling behavior, so use the manufacturer input network and impedance values. Place analog bypass and reference components close to their associated pins, and follow the datasheet's ground and layout example to minimize conversion noise.
Decouple each supply domain with the capacitance and placement specified by the manufacturer, including separate analog and digital bypass paths where shown. The PCM1850 supports 24-bit conversion at 96 kHz, but the usable result also depends on a clean reference, stable clocking, and supply settling. Confirm the exact analog and digital supply voltages, operating ranges, and power-up sequence against the datasheet before committing the schematic.
Synchronize multiplexer selection with the conversion and serial-output timing described in the PCM1850 datasheet. Incorrect sequencing can pair a sample with the wrong input or introduce invalid output data during channel changes. Use the converter clock for digital timing, observe setup and hold requirements, and avoid adding long branch stubs to the SPI interface. Validate channel order during startup with a known test signal.
Do not assume that any 32-pin stereo ADC can replace PCM1850PJT solely because the packages match. The PGA range, multiplexer organization, control registers, clock expectations, reference requirements, reset behavior, and SPI timing must all be compared pin by pin. The maximum analog input is 2.4 Vrms, and the programmable gain does not remove the need to prevent input clipping.
מידע על תאימות
The available product information does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes with the manufacturer for the exact orderable MPN before using them in procurement requirements.