PIC16F720-E/ML - 8-Bit 16MHz Microcontroller | Microchip
MPN: PIC16F720-E/ML ✓ פעילPIC16F720-E/ML סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The PIC16F720 belongs to the PIC16 family of 8-bit RISC microcontrollers and incorporates Microchip nanoWatt XLP technology. This product hierarchy places it below general-purpose embedded processors while combining low-power operation, deterministic control, and a compact package for cost-sensitive designs.
Key features include 3.5 KB of flash memory, 128 bytes of SRAM, 18 I/O pins, and operation from 2.5 V, 3.3 V, or 5 V. The 20-pin QFN exposed-pad construction supports dense PCB layouts by reducing lead span and providing a thermal pad for solder attachment and heat spreading. The family is supported by Microchip development tools and is suitable for programmed control, signal monitoring, and compact automation logic.
The PIC16F720-E/ML belongs to the PIC16F720 and PIC16F721 device family. The -E/ML ordering code identifies the extended-temperature configuration and the QFN package, while the exact suffix also reflects the manufacturer’s packing designation. The manufacturer describes the PIC16F720 as an in-production product and provides a dedicated product page with its data sheet and CAD resources. Its architecture combines a familiar 8-bit execution model with integrated flash and SRAM for compact firmware images.
Typical applications include industrial control modules, building and appliance controllers, compact sensor interfaces, power-management equipment, automotive electronic modules, and low-cost embedded products. The 18 available I/O pins support digital inputs, outputs, and multiplexed peripheral functions, while the wide supply-voltage range allows the same controller family to be used across 2.5 V, 3.3 V, and 5 V systems. The extended temperature range is especially useful in equipment exposed to substantial thermal variation.
PCB design should preserve the manufacturer’s recommended pad geometry, exposed-pad connection, and decoupling layout. Route sensitive inputs away from fast-changing output nets, keep the exposed pad thermally and electrically connected as specified, and validate firmware operation across the intended voltage and temperature extremes. The manufacturer data sheet should be used for the complete pin-description table, electrical limits, and programming information.
This page combines the manufacturer product status, distributor package information, exact-MPN pricing records, application guidance, and qualified same-package alternatives. It also distinguishes documented electrical differences among controller options so engineers can assess replacement suitability without relying on package similarity alone.
חלופות תחליף ישיר עבור PIC16F720-E/ML — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16F720-E/ML (אותו גורם צורה וטביעת רגל) — שונים ב Package, Core Architecture, Operating Temperature, Program Memory (Flash), Timers.
PIC16F720-I/ML
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F721-E/ML
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F721-I/ML
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F720-E/ML דירוגים מרביים ומאפיינים חשמליים
| Microcontroller Type | 8-bit PIC 16F flash microcontroller |
| תדר שעון מקסימלי | 16 MHz |
| Program Memory Size | 3.5 KB |
| Program Memory Organization | 2K x 14 words |
| SRAM Size | 128 bytes |
| I/O Pin Count | 18 pins |
| טווח טמפרטורת פעולה | -40°C to +125°C |
| Operating Voltage Options | 2.5 V, 3.3 V, or 5 V |
| מארז | 20-pin QFN with exposed pad, 4 mm x 4 mm |
| סוג הרכבה | Surface mount |
| Low-Power Technology | nanoWatt XLP |
| Product Family | PIC16F720/721 20-pin flash microcontroller family |
| Programming Memory Type | Flash |
| Product Status | In production |
| Tube Packaging | Tube |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
מדריך תצורת פינים של PIC16F720-E/ML 20-pin qfn with exposed pad, 4 mm x 4 mm
תצורת פינים עבור PIC16F720-E/ML (מארזת 20-pin qfn with exposed pad, 4 mm x 4 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור PIC16F720-E/ML.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC16F720-E/ML מתאים עבור 6 יישוםs: Industrial Control Modules, Automotive Electronic Modules, Appliance Control Boards, Sensor Interface and Acquisition, Building Automation Equipment, Low-Power Embedded Products.
Industrial Control Modules
PIC16F720-E/ML fits compact industrial control modules because it combines 18 I/O pins, 3.5 KB of flash memory, and an extended -40°C to +125°C operating range in a 20-pin QFN package. It can execute sequencing, monitor discrete inputs, and control outputs where a larger processor is unnecessary. The 16 MHz operating rate supports responsive control logic, while flash allows firmware to be updated during production. The QFN exposed-pad construction reduces board footprint, but its thermal pad and land pattern must follow the manufacturer package drawing. Firmware and I/O assignments should be validated across the full industrial temperature range and the exact supply voltage selected for the module.
מומלץ
Automotive Electronic Modules
PIC16F720-E/ML is suitable for compact automotive electronic modules requiring an 8-bit controller, 18 I/O pins, and operation from -40°C to +125°C. Its flash program memory supports field-updateable control logic, while the 20-pin QFN exposed-pad package is useful where connector and component spacing is constrained. The device can coordinate switches, sensing lines, and communication interfaces within a sensor or actuator module. The exact ordering code does not by itself establish AEC-Q100 qualification, so a production automotive program must confirm qualification and any required automotive-design documentation before release.
מומלץ
Appliance Control Boards
PIC16F720-E/ML can serve as the primary controller in an appliance where a compact footprint, low component count, and extended-temperature operation are important. Its 18 I/O pins can handle user interfaces, relays, sensors, and status indicators, while 3.5 KB of flash provides space for control sequences and configuration handling. The 20-pin QFN package reduces routing congestion compared with a larger leaded outline. Designers should use the exposed pad as directed by the package drawing and place local decoupling close to the supply pins. Firmware timing should cover motor, heater, and mains-contactor sequences across the intended voltage and temperature limits.
מומלץ
Sensor Interface and Acquisition
PIC16F720-E/ML is appropriate for small sensor-interface assemblies that require programmable digital conditioning, local decisions, and status reporting. Its 18 I/O pins provide access to sensor inputs and actuator outputs, while 3.5 KB of flash accommodates configuration tables and acquisition routines. The 16 MHz maximum clock rate supports deterministic sampling and communication tasks in a compact 20-pin QFN footprint. For analog measurement accuracy, use the complete electrical limits and external signal-conditioning components described by the manufacturer data sheet. Place sensitive traces away from switching nodes and decouple the supply locally to reduce measurement noise.
מומלץ
Building Automation Equipment
PIC16F720-E/ML can implement distributed building-automation nodes for lighting control, access equipment, environmental monitoring, and actuator interfaces. Its extended -40°C to +125°C range is useful near HVAC equipment, while 18 I/O pins reduce the need for additional logic in simple nodes. The 3.5 KB flash area and 128-byte SRAM are appropriate for compact protocols and state machines. The 20-pin QFN package supports dense control boards, although exposed-pad soldering and thermal verification are essential. Use the manufacturer pin table to preserve programming and debug access, and validate communications timing against the actual bus and peripheral configuration.
מומלץ
Low-Power Embedded Products
PIC16F720-E/ML is suitable for compact, low-duty-cycle embedded products that combine local control with nanoWatt XLP technology. The family’s 2.5 V, 3.3 V, and 5 V operating options support low-voltage battery-powered designs as well as conventional 5 V equipment. Eighteen I/O pins allow sensing and control without a larger package, while flash provides nonvolatile program storage. Power performance depends on the selected clock, peripheral configuration, and operating mode, so the final battery-life calculation must use the manufacturer sleep and active-current characteristics for the exact configuration. Keep the exposed pad layout unobstructed for manufacturing and thermal consistency.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16F720-E/ML — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16F720-I/ML | PIC16F721-E/ML | PIC16F721-I/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin QFN with exposed pad, 4 mm x 4 mm | 20-pin QFN with exposed pad, 4 mm x 4 mm | 20-pin QFN family package | 20-pin QFN family package |
| Operating Temperature | -40°C to +125°C | Industrial-temperature grade | Extended-temperature family variant | Industrial-temperature family variant |
| Core Architecture | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 |
| Flash Memory | Programmable flash | Programmable flash | Flash | Flash |
מבדילים עיקריים
- Extended-temperature operation (לעומתPIC16F720-I/ML)
- Exact flash and SRAM resource set (לעומתPIC16F721-E/ML)
- 18-I/O integration in a compact QFN (לעומתPIC16F721-I/ML)
הערות תכנון
Use the manufacturer QFN land pattern and exposed-pad drawing directly rather than adapting a generic 20-pin footprint. Preserve pin-1 orientation, connect the exposed pad according to the data sheet, and place input and output decoupling capacitors close to their associated pins. The exposed pad also serves as a thermal path, so its solder coverage and copper treatment should be validated at the assembly process level.
Determine operating current from the exact clock, peripheral, and sleep configuration rather than using a single headline current value. For battery-powered designs, calculate the average consumption from active and sleep intervals and include leakage, sensor current, regulator efficiency, and wake-up overhead. Confirm the final rail voltage against the manufacturer’s permitted operating-voltage and peripheral-specific limits.
Do not treat the QFN exposed pad as an optional thermal feature or assume it replaces a numbered signal connection. Review the exact pin-description table before assigning multiplexing functions. Also check programming and debug access requirements; adding test points or connector pads after layout can create clearance conflicts in the compact 4 mm by 4 mm package.
Route sensitive sensor and communication inputs away from switching nodes, relay drivers, and the exposed-pad supply connection. Keep ground returns short and provide local bypass paths to minimize supply transients. If the design combines analog measurement, communications, and switching outputs, partition the layout by function and verify the assembled board with the intended clock configuration and firmware.
מידע על תאימות
The exact-MPN product records do not explicitly establish these compliance states. The automotive-related wording in a product listing does not by itself establish AEC-Q100 qualification.