PIC16LF1519-I/MV - 28KB Flash 8-bit MCU 20MHz UQFN-40 | Microchip
MPN: PIC16LF1519-I/MV ✓ פעילPIC16LF1519-I/MV סקירה
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating CPU core, Flash program memory, SRAM, EEPROM, peripherals, and interrupt logic in one package. PIC microcontrollers from Microchip use a RISC-based Harvard architecture with separate program and data buses, providing deterministic instruction timing and low power consumption. The PIC16 family occupies the mid-range of Microchip's portfolio, balancing code density, peripheral integration, and cost for consumer, industrial, and IoT applications.
Key features of the PIC16LF1519-I/MV include the eXtreme Low Power (XLP) technology with nanoWatt sleep currents, an internally-tuned 16MHz HFINTOSC, two 10-bit PWM modules with complementary outputs, a 10-bit ADC with up to 28 channels, and on-chip mTouch capacitive sensing support. The device also provides an enhanced USART, two MSSP peripherals for SPI/I2C, and an in-circuit debugger interface. Internal oscillator accuracy eliminates the need for an external crystal in many cost-sensitive designs.
The PIC16LF1519-I/MV uses a 14-bit instruction word with a 16-level hardware stack, eight interrupt sources, and a vectored interrupt controller. Power management features include Idle and Sleep modes with peripheral clock gating, brown-out reset, and a low-power watchdog timer with its own on-chip 31kHz oscillator. The 10-bit ADC delivers up to 28 analog channels with automatic channel scanning, supporting sensor and battery-monitoring designs without an external analog MUX.
Typical applications include low-power IoT sensor nodes, consumer appliances with HMI displays, USB HID peripherals, industrial sensor hubs, battery-powered data loggers, and home automation controllers. The 36 I/O lines and three serial interfaces (EUSART plus two I2C/SPI) provide enough connectivity for multi-sensor fusion, while XLP nanoWatt technology keeps quiescent current low for years-of-life on coin cells.
When designing with this device, ensure the exposed thermal pad (EP) on the UQFN-40 is soldered to the PCB ground plane to meet thermal and electrical specifications; floating the EP violates the datasheet. Use Microchip's MPLAB X IDE with the XC8 compiler and consider the PICkit 4 or MPLAB Snap for programming and debugging. Decouple VDD with 100nF and 1uF ceramics placed within 5mm of each power pin.
This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF151x family, application notes, and practical design considerations that go beyond what is printed in the Microchip datasheet.
חלופות תחליף ישיר עבור PIC16LF1519-I/MV — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16LF1519-I/MV (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, Package, I/O Pins, Timers, RoHS Status.
PIC16LF1519T-I/MV
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1518-I/MV
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC16F1519-I/MV
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1517-I/MV
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1519-I/MV
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1519-I/MV דירוגים מרביים ומאפיינים חשמליים
| Series | PIC16LF151x |
| Core | PIC16 8-bit RISC |
| Program Memory | 28 KB Flash (16K x 14 words) |
| Data SRAM | 1024 bytes |
| Data EEPROM | 128 bytes |
| תדר שעון מקסימלי | 20 MHz |
| Operating Voltage Range | 1.8 V to 3.6 V |
| I/O Pins | 36 |
| ADC | 10-bit, up to 28 channels |
| PWM | Two 10-bit PWM modules |
| Serial Interfaces | 1x EUSART, 2x MSSP (I2C/SPI) |
| Timers | 5 (Timer0/1/2/4/6) |
| טמפרטורת פעולה | -40 C to +85 C (Industrial, 'I') |
| מארז | 40-pin UQFN (5x5 mm) with exposed pad |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| Lead-Free | Yes |
תצורת פינים של PIC16LF1519-I/MV
| פין 1 | RA0/AN0 — Digital I/O / ADC analog input channel 0 |
| פין 2 | RA1/AN1 — Digital I/O / ADC analog input channel 1 |
| פין 3 | RA2/AN2 — Digital I/O / ADC analog input channel 2 |
| פין 4 | RA3/AN3/VREF+ — Digital I/O / ADC analog input channel 3 / ADC positive reference |
| פין 5 | RA4/AN4 — Digital I/O / ADC analog input channel 4 |
| פין 6 | RA5/AN5/SS — Digital I/O / ADC analog input channel 5 / SPI slave select |
| פין 7 | RA6/OSC2 — Digital I/O / external oscillator output |
| פין 8 | RA7/OSC1/CLKIN — Digital I/O / external oscillator input / external clock input |
| פין 9 | VDD — Positive power supply (1.8 V to 3.6 V) |
| פין 10 | VSS — Ground reference |
| פין 11 | RB0/AN12/INT — Digital I/O / ADC channel 12 / external interrupt |
| פין 12 | RB1/AN10/C1IN+ — Digital I/O / ADC channel 10 / comparator non-inverting input |
| פין 13 | RB2/AN8 — Digital I/O / ADC channel 8 |
| פין 14 | RB3/AN9/C1OUT — Digital I/O / ADC channel 9 / comparator output |
| פין 15 | RB4/AN11 — Digital I/O / ADC channel 11 |
| פין 16 | RB5/AN13 — Digital I/O / ADC channel 13 |
| פין 17 | RB6/ICSPCLK — Digital I/O / ICD programming clock (in-circuit serial programming) |
| פין 18 | RB7/ICSPDAT — Digital I/O / ICD programming data |
| פין 19 | RC0/SOSCO — Digital I/O / secondary oscillator output (32.768 kHz) |
| פין 20 | RC1/SOSCI — Digital I/O / secondary oscillator input (32.768 kHz) |
| פין 21 | RC2/AN14 — Digital I/O / ADC channel 14 |
| פין 22 | RC3/AN15/SCL — Digital I/O / ADC channel 15 / I2C clock |
| פין 23 | RC4/AN16/SDA — Digital I/O / ADC channel 16 / I2C data |
| פין 24 | RC5/AN17 — Digital I/O / ADC channel 17 |
| פין 25 | RC6/AN18/TX/CK — Digital I/O / ADC channel 18 / EUSART async transmit or sync clock |
| פין 26 | RC7/AN19/RX/DT — Digital I/O / ADC channel 19 / EUSART async receive or sync data |
| פין 27 | RD0 — Digital I/O port D bit 0 |
| פין 28 | RD1 — Digital I/O port D bit 1 |
| פין 29 | RD2 — Digital I/O port D bit 2 |
| פין 30 | RD3 — Digital I/O port D bit 3 |
| פין 31 | RD4 — Digital I/O port D bit 4 |
| פין 32 | RD5 — Digital I/O port D bit 5 |
| פין 33 | RD6 — Digital I/O port D bit 6 |
| פין 34 | RD7 — Digital I/O port D bit 7 |
| פין 35 | RE0/AN20 — Digital I/O / ADC channel 20 |
| פין 36 | RE1/AN21 — Digital I/O / ADC channel 21 |
| פין 37 | RE2/AN22 — Digital I/O / ADC channel 22 |
| פין 38 | RE3/MCLR/VPP — Digital I/O (input only) / Master Clear reset / programming voltage |
| פין 39 | VDD — Positive power supply (1.8 V to 3.6 V) |
| פין 40 | VSS — Ground reference |
| פין EP | EP — Exposed thermal pad - must be soldered to PCB ground for thermal and electrical performance |
יישומים טיפוסיים
PIC16LF1519-I/MV מתאים עבור 7 יישוםs: Battery-Powered IoT Sensor Nodes, Consumer Appliance HMI Controllers, Industrial Sensor Hubs and Data Loggers, USB HID Peripherals, Home Automation Lighting Controllers, Medical Monitoring Accessories, Automotive Body Electronics (Non-Safety).
Battery-Powered IoT Sensor Nodes
The PIC16LF1519-I/MV is an excellent fit for battery-powered IoT sensor nodes because of its nanoWatt XLP technology, 1.8 V minimum operating voltage, and Sleep currents below 50 nA typical. The 28 KB Flash supports application code plus a wireless protocol stack (LoRaWAN or Zigbee via an external transceiver), while the 10-bit ADC with up to 28 channels reads multiple sensors without an external MUX. The on-chip HFINTOSC eliminates an external crystal, saving BOM cost and board area for coin-cell designs.
מומלץ
Consumer Appliance HMI Controllers
The PIC16LF1519-I/MV drives white-goods and small-appliance human-machine interfaces (HMI) where 36 I/O pins handle keypads, LED indicators, segment-LCD biasing, and relay drivers. Its two 10-bit PWM modules provide dimming for backlights and buzzers, while the EUSART and MSSP peripherals connect to a BLE or Wi-Fi module for smart-home connectivity. The wide 1.8 V to 3.6 V supply tolerance allows direct 3.3 V regulator operation from rectified mains.
מומלץ
Industrial Sensor Hubs and Data Loggers
The PIC16LF1519-I/MV aggregates 4 mA to 20 mA industrial loops, RTD sensors, and digital I/O in compact sensor hubs thanks to its 28-channel 10-bit ADC, EUSART (RS-232/RS-485 bridge), and 1 KB RAM buffer. Flash EEPROM endurance of 100 k cycles (per datasheet) supports local non-volatile data logging, while the 36 I/O lines drive opto-isolators and status LEDs. The industrial -40 C to +85 C temperature rating suits factory floor deployments.
מומלץ
USB HID Peripherals
The PIC16LF1519-I/MV can be paired with an external USB bridge such as the MCP2221A to implement USB HID peripherals like keyboards, mice, and custom input devices. The 28 KB Flash accommodates HID report descriptors and application logic, while the 36 I/O scan a 20+ key matrix directly without an external key-scan IC. The MCP2221A provides USB-to-UART/I2C bridging with no firmware changes on the PIC side.
מומלץ
Home Automation Lighting Controllers
The PIC16LF1519-I/MV executes DALI, 0-10 V dimming, and DMX512 protocols in residential lighting controllers thanks to its EUSART and two MSSP peripherals for multi-protocol bridging. The 10-bit PWM modules generate analog dimming outputs, while 36 I/O pins drive relay banks and rotary encoder inputs. Low Sleep current keeps wall-switch designs within Energy Star standby budgets.
מומלץ
Medical Monitoring Accessories
The PIC16LF1519-I/MV reads photoplethysmography (PPG) sensors, thermistors, and accelerometers in wearable medical monitoring accessories where low power and small package are critical. The 10-bit ADC samples pulse oximetry signals while the EUSART streams data to a BLE module. The exposed thermal pad on the UQFN-40 package helps dissipate heat during continuous monitoring, and the 1.8 V operation allows direct Li-ion battery connection through an LDO.
מומלץ
Automotive Body Electronics (Non-Safety)
The PIC16LF1519-I/MV (industrial grade, -40 C to +85 C) is suitable for non-safety automotive body electronics such as seat controllers, mirror adjusters, and ambient lighting where AEC-Q100 is not mandated. The EUSART interfaces to LIN bus transceivers, while the 36 I/O drive H-bridge drivers and LED arrays. Designers needing AEC-Q100 qualification should migrate to the PIC16F1519-E/MV automotive variant or a dedicated PIC16F1xxx automotive family member.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16LF1519-I/MV — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16LF1519T-I/MV | PIC16LF1518-I/MV | PIC16F1519-I/MV |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-UQFN (5x5 mm) | 40-UQFN (5x5 mm) - same | 40-UQFN (5x5 mm) - same | 40-UQFN (5x5 mm) - same |
| Flash Program Memory | 28 KB | 28 KB | 16 KB | 28 KB |
| Data SRAM | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes |
| Data EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V |
| Maximum Clock | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| I/O Pins | 36 | 36 | 36 | 36 |
| ADC | 10-bit, 28 ch | 10-bit, 28 ch | 10-bit, 24 ch | 10-bit, 28 ch |
| AEC-Q100 Qualified | No (industrial) | No (industrial) | No (industrial) | No (industrial, see Q1 suffix for automotive) |
מבדילים עיקריים
- Lowest operating voltage in PIC16F151x family (לעומתPIC16F1519-I/MV)
- Largest Flash memory in PIC16LF151x family (לעומתPIC16LF1518-I/MV)
- nanoWatt XLP technology for Sleep-current-limited designs (לעומתPIC16F1519-I/MV)
הערות תכנון
The 40-pin UQFN (5x5 mm) package features an exposed thermal pad (EP) that MUST be soldered to the PCB ground plane for both thermal dissipation and electrical grounding per the Microchip PIC16LF1519 datasheet section on package information. Solder the EP using an array of vias to the inner ground plane to meet the package's thermal resistance of approximately 28 C/W (4-layer PCB with 1 oz copper). Floating the EP invalidates the datasheet electrical specifications.
Decouple the two VDD pins (pin 9 and pin 39) and the single VSS pin (pin 10) with 100 nF X7R ceramic capacitors placed within 5 mm of each supply pin, plus a bulk 1 uF to 10 uF tantalum or ceramic capacitor on the supply rail. The PIC16LF1519's nanoWatt XLP technology drops to sub-microamp Sleep currents, but a noisy supply will prevent proper wakeup. Use a low-noise LDO such as MCP1700 for battery applications.
Do not configure the MCLR/RE3/VPP pin as a general-purpose output; it is input-only by design and disabling MCLR can lock the part if the configuration bit is set incorrectly. Use the internal HFINTOSC for prototypes to free RA6/RA7 for I/O; switch to an external crystal only when timing accuracy demands it. Confirm CONFIG1 register FOSC setting matches the hardware oscillator mode (HS, XT, or INTOSC) before programming.
Route the ICSPDAT and ICSPCLK lines (RB7/IB7 and RB6/IB6) with care, keeping them away from switching signals and using series resistors of 10 kohm to 100 kohm if the lines are long. When in-circuit debugging, MPLAB X uses these pins as a dedicated programming interface; isolating them with jumpers or FET switches enables in-field firmware updates without removing the MCU.
מידע על תאימות
RoHS and REACH compliance confirmed by Microchip product page. Industrial -40 C to +85 C temperature grade; no AEC-Q100 qualification on the -I/ suffix - choose -E or -Q1 suffix variants for automotive. Halogen-free status not explicitly listed in verified web data.
