PIC16LF1823-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 14-PDIP | Microchip
MPN: PIC16LF1823-E/P ✓ פעילPIC16LF1823-E/P סקירה
A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O, and a set of on-chip peripherals. The PIC16LF1823 belongs to the enhanced mid-range PIC16 family with a RISC architecture executing instructions in as little as 200 ns at 32 MHz, putting it in the microcontrollers > 8-bit microcontrollers > embedded controllers > semiconductor hierarchy used in AI knowledge graphs.
Key differentiating features include a 10-bit ADC with up to 8 channels, a 5-bit single-channel DAC, two PWM modules, an enhanced USART, MSSP for SPI/I2C, and a 32 kHz internal oscillator accurate enough for many low-power timing applications. The device also integrates a 16-level hardware comparator, configurable logic cells (CLC), and on-chip EEPROM emulation. The -E temperature grade supports -40C to +125C industrial operation.
Architecturally, the PIC16LF1823 implements the PIC16 enhanced mid-range core with a hardware stack and 49 instruction set, providing predictable real-time interrupt latency. nanoWatt XLP technology allows the CPU, peripherals, and oscillator to be selectively gated off, achieving sub-uA sleep currents suitable for battery-powered sensor nodes.
Typical applications include battery-powered IoT sensor nodes, low-power remote controls, LED lighting controllers, small appliance control boards, and hobbyist / maker projects on PICkit-programmable development boards. Designers value the part for its compact 14-pin footprint, generous ADC for analog front ends, and Microchip's free MPLAB X IDE plus XC8 toolchain support.
When designing with this MCU, ensure the configuration bits are set to enable the internal 32 MHz HFINTOSC, and add a 0.1uF decoupling capacitor close to VDD with a bulk 1uF or larger to handle peak digital switching currents. Watch the 14-pin limitation - VDD and VSS each appear on only two pins, so place both decoupling caps within a few millimeters of the package.
This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in alternatives from Microchip's PIC16 family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single source for sourcing and design-in decisions.
חלופות תחליף ישיר עבור PIC16LF1823-E/P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16LF1823-E/P (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Package, Core Architecture, Operating Temperature, Program Memory (Flash).
PIC16F1823-E/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1823-I/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1823-E/ML
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1823-E/JQ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1554-I/ST
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1554-I/ML
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1784-I/ML
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF1823-E/P דירוגים מרביים ומאפיינים חשמליים
| Product Family | PIC16F series, enhanced mid-range core |
| Program Memory (Flash) | 3.5 KB (2K x 14 words) |
| Data SRAM | 128 bytes |
| Data EEPROM | 256 bytes (emulated in Flash per datasheet) |
| Maximum CPU Frequency | 32 MHz |
| Instruction Cycle Time | 200 ns at 32 MHz |
| Operating Voltage (VDD) | 1.8 V to 3.6 V |
| I/O Pins | 12 |
| ADC | 10-bit, up to 8 channels |
| DAC | 5-bit, 1 channel |
| PWM Outputs | 2 modules |
| Communication Peripherals | EUSART, MSSP (SPI / I2C) |
| Timers | Timer0, Timer1, Timer2 |
| Comparators | 2 (with 16-level voltage reference) |
| טמפרטורת פעולה | -40C to +125C (industrial, -E grade) |
| מארז | 14-pin PDIP (P), through-hole, 7.62 mm row spacing |
| Technology | nanoWatt XLP (extreme low-power) |
| RoHS / Lead-Free | Compliant (lead-free finish) |
תצורת פינים של PIC16LF1823-E/P
| פין 1 | VDD — Positive supply voltage (1.8 V to 3.6 V) |
| פין 2 | RA5 — Digital I/O / analog input AN4 |
| פין 3 | RA4 — Digital I/O (open-drain option) / analog input AN3 |
| פין 4 | RA3/MCLR — Digital I/O or Master Clear reset input (active low) |
| פין 5 | RC5 — Digital I/O / analog input AN5 |
| פין 6 | RC4 — Digital I/O / analog input AN6 |
| פין 7 | RC3 — Digital I/O / analog input AN7 |
| פין 8 | RC2 — Digital I/O / analog input AN8 |
| פין 9 | RC1 — Digital I/O / analog input AN9 |
| פין 10 | RC0 — Digital I/O / analog input AN10 |
| פין 11 | RA2 — Digital I/O / analog input AN2 / DAC output reference |
| פין 12 | RA1/ICSPCLK — Digital I/O / ICSP clock (programming) |
| פין 13 | RA0/ICSPDAT — Digital I/O / ICSP data (programming) |
| פין 14 | VSS — Ground reference |
יישומים טיפוסיים
PIC16LF1823-E/P מתאים עבור 6 יישוםs: Battery-Powered IoT Sensor Nodes, Low-Power Remote Controls, LED Lighting Controllers, Small Appliance Control Boards, Hobbyist / Maker Development Boards, Analog Sensor Front Ends.
Battery-Powered IoT Sensor Nodes
The PIC16LF1823-E/P is well suited for battery-powered IoT sensor nodes thanks to its nanoWatt XLP technology, which drops sleep current below 1 uA and lets the part wake periodically for duty-cycled transmissions. Its 1.8 V to 3.6 V supply range accommodates a single 3.0 V CR2032 coin cell or two AA alkalines without boost conversion, while the 32 MHz internal HFINTOSC handles small protocol stacks and the 10-bit 8-channel ADC reads temperature, light, and motion sensors directly. Paired with an external sub-GHz or BLE transceiver, the part forms a coin-cell sensor node with multi-year battery life; compared to switching regulators, the MCU's quiescent draw adds negligible system-level current.
מומלץ
Low-Power Remote Controls
Handheld remote control designs benefit from the PIC16LF1823-E/P's deep sleep currents under 1 uA and instant wake on pin-change interrupts, which lets a coin cell last several years even with daily button presses. The EUSART and MSSP peripherals drive IR LED modulation or 2.4 GHz radio modules, while the 5-bit DAC can synthesize simple audio confirmation tones. The 14-pin PDIP package is easy to hand-solder for prototyping and works with low-cost AC-side or piezo haptic feedback circuits. Compared to bare CMOS logic ICs, integrating the microcontroller reduces part count by 4-6 components and adds configurability through firmware updates.
מומלץ
LED Lighting Controllers
Architectural and decorative LED controllers frequently use the PIC16LF1823-E/P to drive WS2812B addressable strips or constant-current LED drivers via PWM. Two PWM modules plus the 5-bit DAC enable RGB color mixing with software fade profiles, while the EUSART generates WS2812B timing on bit-banged or hardware-assisted output. The 32 MHz core sustains 100 Hz refresh on hundreds of LEDs without flicker. Industrial -40C to +125C operation supports outdoor luminaires, and the 1.8 V to 3.6 V rail pairs cleanly with 3.3 V LED driver supplies; designers often add a small MOSFET stage downstream of the part for high-current PWM dimming.
מומלץ
Small Appliance Control Boards
Compact consumer appliances such as coffee machines, kitchen scales, and air-quality monitors rely on the PIC16LF1823-E/P for its 10-bit ADC, integrated comparators, and EUSART in a small 14-pin PDIP. The part reads thermistor or load-cell analog signals, drives triacs or relays through PWM, and exposes Modbus or UART for a master display board. nanoWatt XLP lets wall-wart powered designs meet standby targets below 100 mW. The -E temperature grade also covers enclosed oven-style appliance environments where ambient can exceed +85C for short periods.
מומלץ
Hobbyist / Maker Development Boards
The PIC16LF1823-E/P is widely used on Microchip's Curiosity and PICkit-compatible development boards because the 14-pin PDIP package fits standard 0.1-inch breadboards and the on-chip ICSP interface lets a PICkit 3/4/5 program the device without external components. Makers benefit from MPLAB X IDE's free XC8 toolchain, the MPLAB Code Configurator (MCC) for graphical peripheral setup, and a vast library of community examples covering PWM, ADC, I2C, and UART projects. Compared to bare microcontrollers requiring external oscillators, the 32 MHz internal HFINTOSC simplifies wiring and reduces per-project component count to a single decoupling cap plus the MCU.
מומלץ
Analog Sensor Front Ends
The PIC16LF1823-E/P's 10-bit 8-channel ADC and 5-bit DAC combined with two analog comparators make it a strong fit for analog sensor front ends in industrial measurement modules. The ADC reads bridge sensors, thermocouples (with external amplification), or potentiometers at up to 100 ksps with 10-bit resolution, while the comparators generate threshold-triggered interrupts for over-current or limit-switch detection. The internal 16-level voltage reference removes an external resistor divider, and the 32 MHz core runs small digital filters inline. Compared to standalone ADC ICs, integrating the ADC with the controller removes a SPI/I2C bus and simplifies BOM by 1-2 ICs.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16LF1823-E/P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16F1823-E/P | PIC16LF1823-I/P | PIC16LF1823-E/ML | PIC16LF1823-E/JQ |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin PDIP (P), through-hole | 14-pin PDIP (P) - same | 14-pin PDIP (P) - same | 16-pin QFN (ML) - different footprint | 16-pin UQFN (JQ) - different footprint |
| Operating Voltage | 1.8 V to 3.6 V (LF) | 2.3 V to 5.5 V (F) | 1.8 V to 3.6 V (LF) - same | 1.8 V to 3.6 V (LF) - same | 1.8 V to 3.6 V (LF) - same |
| Flash Program Memory | 3.5 KB | 3.5 KB - same | 3.5 KB - same | 3.5 KB - same | 3.5 KB - same |
| Data SRAM | 128 B | 128 B - same | 128 B - same | 128 B - same | 128 B - same |
| Maximum CPU Frequency | 32 MHz | 32 MHz - same | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| Temperature Grade | -40C to +125C (E grade) | -40C to +125C (E grade) - same | -40C to +85C (I grade) | -40C to +125C (E grade) - same | -40C to +125C (E grade) - same |
| ADC Resolution | 10-bit, 8 channels | 10-bit, 8 channels - same | 10-bit, 8 channels - same | 10-bit, 8 channels - same | 10-bit, 8 channels - same |
| Unit Price (qty 1, USD) | 1.42 | 1.40 approx. | 1.30 approx. | 1.45 approx. | 1.55 approx. |
מבדילים עיקריים
- Industrial -40C to +125C temperature grade (לעומתPIC16LF1823-I/P)
- Wide 1.8 V to 3.6 V supply range covers coin cells to 3.3 V rails (לעומתPIC16F1823-E/P)
- Through-hole PDIP for breadboard-friendly prototyping (לעומתPIC16LF1823-E/ML (QFN-16))
הערות תכנון
Estimated: at VDD=3.3 V, CPU running 32 MHz HFINTOSC at full active mode, the PIC16LF1823 draws ~3.5 mA core current plus I/O sink/source contributions. Add a 100 nF ceramic decoupling capacitor placed within 5 mm of pin 1 (VDD) and pin 14 (VSS), with a 1 uF or larger bulk cap on the same supply rail. For sleep currents below 1 uA, ensure all unused I/O pins are configured as outputs (low) or inputs with the internal weak pull-up enabled, and disable the ADC, comparators, and PWM modules before executing the SLEEP instruction.
Place VDD (pin 1) and VSS (pin 14) decoupling capacitors as close to the package as the PCB layout allows. With only one VDD and one VSS pin on the 14-pin PDIP, routing both decoupling caps to their respective pins via short, wide traces (< 5 mm, > 0.25 mm width) prevents digital switching noise from coupling into the analog ADC references. Keep the analog AVdd/Vref (used by the ADC and DAC) tied to VDD at the pin with a dedicated 100 nF + 10 uF RC network if high-precision ADC readings are required.
Do not leave the MCLR/RA3 pin floating - even with internal weak pull-up enabled, an open MCLR pin can cause spurious resets in noisy environments. Tie MCLR to VDD through a 10 kohm resistor for normal operation, or drive it directly from the programmer/debugger for ICSP. Also note that the LF variant cannot be operated above 3.6 V, so selecting the F variant (PIC16F1823-E/P) is mandatory if a 5 V rail is the only supply. Configuration bits (FOSC, WDTE, BOREN, etc.) must be set correctly in firmware; an incorrect oscillator select can lock out ICSP programming.
מידע על תאימות
RoHS compliant per Microchip product page; lead-free finish. Not AEC-Q100 qualified - this part is industrial grade only. For AEC-Q100 automotive applications, look at higher-tier PIC16/dsPIC automotive grades. Halogen-free status not explicitly stated in the verified web data.
