PIC16LF627-04/P - 4MHz 8-Bit Flash MCU, 1.75KB | Microchip
MPN: PIC16LF627-04/P ✓ פעילPIC16LF627-04/P סקירה
A flash-based 8-bit CMOS microcontroller (MCU) combines a CPU core, on-chip non-volatile program memory, RAM, and configurable peripherals in a single integrated circuit. The PIC16F62X family uses a Harvard architecture where program and data memories are accessed through separate buses, allowing instruction fetch and operand read to occur in a single cycle. This class of MCU sits within the broader product hierarchy: 8-bit microcontroller -> microcontroller -> embedded controller -> semiconductor IC. It is widely deployed in cost-sensitive, low-power consumer, appliance, and industrial control applications where deterministic real-time behavior matters more than raw compute throughput.
Key differentiating features include 4MHz maximum operating frequency, 200ns instruction cycle, 16 I/O with individual direction control, an enhanced USART supporting RS-232/RS-485, a 16-bit timer/counter with capture/compare/PWM, an internal voltage reference, two analog comparators, and in-circuit serial programming (ICSP). The 224-byte SRAM and 128-byte EEPROM on-chip data EEPROM support parameter storage without external memory. Brown-out reset (BOR), watchdog timer (WDT), and power-on reset (POR) round out the safety features typical of Microchip mid-range 8-bit devices.
Architecturally, the PIC16F62X uses a 14-bit instruction set with a fixed 2-stage pipeline, delivering 5 MIPS at 20MHz. The 'LF' voltage variant extends low-voltage operation down to 2.0V, making the part usable directly from a 2xAA battery stack or 3.3V regulated rail. The '-04' speed designation caps the internal oscillator at 4MHz, trading clock speed for lower EMI and reduced power consumption in cost-sensitive designs.
Typical applications include consumer remote controls, small appliance controllers, simple sensor signal conditioners, low-end motor drivers, smart battery chargers, and hobbyist/educational embedded projects. The 18-pin PDIP package is favored for breadboard prototyping and through-hole manufacturing. Designers choose this part when flash re-programmability, integrated EEPROM, and a familiar PIC16 toolchain matter more than higher pin count or modern peripherals like USB or CAN.
חלופות תחליף ישיר עבור PIC16LF627-04/P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16LF627-04/P (אותו גורם צורה וטביעת רגל) — שונים ב Core Architecture, Package, Mounting Type, Operating Temperature, Timers.
PIC16LF628-04/P
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC16LF627A-I/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F627-04/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F628-04/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F627A-I/P
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16LF627-04/P דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PIC16 8-bit RISC, Harvard |
| Maximum CPU Frequency | 4 MHz |
| Program Memory (Flash) | 1.75 KB (1K x 14) |
| Data SRAM | 224 bytes |
| Data EEPROM | 128 bytes |
| Instruction Set Width | 14-bit |
| Instruction Cycle Time | 200 ns @ 4 MHz |
| Supply Voltage (Vdd) | 2.0 V to 5.5 V |
| I/O Pins | 16 |
| טווח טמפרטורת פעולה | 0C to +70C |
| מארז | 18-pin PDIP (P) |
| סוג הרכבה | Through-Hole (DIP) |
| Peripherals | USART, 16-bit Timer/CCP, 2x Analog Comparator |
| Programming Method | ICSP (In-Circuit Serial Programming) |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC16LF627-04/P
| פין 1 | RA2/AN2/CVREF/VREF- — Digital I/O / analog comparator input / voltage reference |
| פין 2 | RA3/AN3/C1OUT — Digital I/O / analog input / comparator 1 output |
| פין 3 | RA4/AN4/T0CKI — Digital I/O / analog input / Timer0 clock input |
| פין 4 | RA5/MCLR/VPP — Digital I/O / Master Clear (reset) / programming voltage |
| פין 5 | VSS — Ground reference |
| פין 6 | RB0/INT — Digital I/O / external interrupt |
| פין 7 | RB1/RX/DT — Digital I/O / USART RX / I/O data |
| פין 8 | RB2/TX/CK — Digital I/O / USART TX / clock line |
| פין 9 | RB3/CCP1 — Digital I/O / Capture-Compare-PWM |
| פין 10 | RB4/PGM — Digital I/O / LVP programming entry |
| פין 11 | RB5 — Digital I/O |
| פין 12 | RB6/T1OSO/T1CKI/PGC — Digital I/O / Timer1 oscillator / ICSP clock |
| פין 13 | RB7/T1OSI/PGD — Digital I/O / Timer1 oscillator / ICSP data |
| פין 14 | VDD — Positive supply voltage (2.0V to 5.5V) |
| פין 15 | OSC2/CLKOUT/RA6 — Crystal output / Fosc clockout / digital I/O |
| פין 16 | OSC1/CLKIN/RA7 — Crystal input / external clock / digital I/O |
| פין 17 | RA0/AN0 — Digital I/O / analog comparator input |
| פין 18 | RA1/AN1 — Digital I/O / analog comparator input |
יישומים טיפוסיים
PIC16LF627-04/P מתאים עבור 6 יישוםs: Consumer Remote Control, Small Appliance Controller, Battery Charger Control, Sensor Signal Conditioner, Hobbyist and Educational Embedded Projects, Simple Motor Driver Controller.
Consumer Remote Control
The PIC16LF627-04/P fits consumer remote-control designs because its 4MHz core, 16 I/O, and 1.75KB flash are sufficient for IR protocol encoding/decoding (RC5, NEC, Sony) and keypad scanning. Operating at 2.0V-5.5V, it runs directly from 2xAA cells without a boost regulator. The internal 16-bit CCP timer drives IR carrier generation (typically 38kHz), and the 224-byte SRAM supports frame buffering. Low power consumption extends battery life to multi-year levels in standby.
מומלץ
Small Appliance Controller
In small kitchen or laundry appliances, the PIC16LF627-04/P delivers deterministic real-time control for motor PWM, temperature sensing, and button/HMI management. Its 16-bit CCP module generates triac-firing pulses or low-side MOSFET drive; the two analog comparators implement over-temperature and zero-cross detection. The 128-byte EEPROM stores calibration constants and user settings through power cycles. The 18-pin PDIP is breadboard-friendly for prototyping with through-hole manufacturing at low volume.
מומלץ
Battery Charger Control
The PIC16LF627-04/P is well-suited for NiMH, Li-ion, or lead-acid charger controllers operating from 2.0V to 5.5V, since its ADC-free analog comparators monitor charge current and termination voltage while the 16-bit timer tracks elapsed time. The internal USART reports state to a host display, and the EEPROM logs charge cycle counts. The wide Vdd range accommodates a single-cell Li-ion pack directly, simplifying BOM. Low Iq in sleep mode reduces standby drain to microampere levels.
מומלץ
Sensor Signal Conditioner
The PIC16LF627-04/P serves as a low-cost sensor front-end that linearizes and calibrates transducer outputs such as thermocouples, RTDs, or load cells. Its analog comparator and 16-bit timer measure pulse widths from sigma-delta or PWM-output sensors, while the EEPROM stores calibration tables. The USART streams conditioned readings to a host controller. Low power and wide Vdd range make it a fit for remote or battery-powered sensor nodes in industrial monitoring.
מומלץ
Hobbyist and Educational Embedded Projects
The PIC16LF627-04/P is a classic choice for student and hobbyist projects on breadboards thanks to its 0.1-inch DIP pin spacing, 5V-tolerant I/O, and free MPLAB X IDE toolchain. It teaches core embedded concepts: GPIO, timers, interrupts, USART, and EEPROM without overwhelming complexity. The 1.75KB flash is large enough for blinking-LED demos up to UART-controlled robots. PICkit programmers provide in-circuit debugging over the ICSP pins, accelerating learning.
מומלץ
Simple Motor Driver Controller
The PIC16LF627-04/P drives low-power brushed DC motors, small steppers, or solenoids via MOSFET gate drivers, using the 16-bit CCP module to generate PWM and the analog comparator to sense back-EMF for stall detection. Its 4MHz core is fast enough for software PID loops in applications like valve actuation or fan control. The USART serves as a command interface to a master controller. The 2.0V-5.5V range supports both 3.3V logic and 5V motor bus rails.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16LF627-04/P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16LF628-04/P | PIC16LF627A-I/P | PIC16F627-04/P | PIC16F628-04/P | PIC16F627A-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 18-pin PDIP (P) | 18-pin PDIP (P) - same | 18-pin PDIP (P) - same | 18-pin PDIP (P) - same | 18-pin PDIP (P) - same | 18-pin PDIP (P) - same |
| Maximum CPU Frequency | 4 MHz | 4 MHz | 20 MHz | 4 MHz | 4 MHz | 20 MHz |
| Program Memory (Flash) | 1.75 KB | 3.5 KB | 1.75 KB | 1.75 KB | 3.5 KB | 1.75 KB |
| Data SRAM | 224 bytes | 224 bytes | 224 bytes | 224 bytes | 224 bytes | 224 bytes |
| Data EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Supply Voltage (Vdd) | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| I/O Pins | 16 | 16 | 16 | 16 | 16 | 16 |
| Peripherals | USART, 16-bit Timer/CCP, 2x Comparator | USART, 16-bit Timer/CCP, 2x Comparator | USART, 16-bit Timer/CCP, 2x Comparator | USART, 16-bit Timer/CCP, 2x Comparator | USART, 16-bit Timer/CCP, 2x Comparator | USART, 16-bit Timer/CCP, 2x Comparator |
מבדילים עיקריים
- Wide 2.0V-5.5V Vdd operation for battery-powered designs (לעומתPIC16F627-04/P)
- Higher flash memory density in same package (לעומתPIC16LF628-04/P)
- Original-spec 4MHz device vs newer A-revision (לעומתPIC16LF627A-I/P)
הערות תכנון
The PIC16LF627-04/P supports a wide 2.0V-5.5V Vdd range, but decoupling must include a 100nF ceramic capacitor placed within 5mm of the Vdd pin (pin 14). For battery-powered designs, add a 10uF bulk capacitor at the supply rail to suppress motor or relay inrush transients. The internal brown-out reset (BOR) and power-on reset (POR) circuitry require a clean Vdd ramp; avoid slow-rising supplies that could trip BOR intermittently.
Pin 4 is MCLR/VPP - never leave it floating. Tie it to Vdd through a 10k resistor for normal operation, or directly to Vdd if reset is not needed. For ICSP programming, route PGD (RB7) and PGC (RB6) traces to a 6-pin header that does not cross other signal traces. The OSC1/OSC2 crystal traces should be short and surrounded by a ground guard ring to minimize EMI pickup on the low-amplitude oscillator waveform.
Configuration word bits (CP, WDTE, BOREN, PWRTE) must be set correctly at programming time or the MCU may fail to start. The configuration word is at flash address 0x2007 and is not erased by a normal chip erase. When migrating from PIC16F627 to PIC16LF627, ensure Vdd actually exceeds 2.0V at startup; designs that worked on the F variant at 4.5V may stall on the LF variant if supplied from a marginal rail.
מידע על תאימות
RoHS-compliant per Microchip product page. Industrial temperature range 0C to +70C only; automotive designs should use AEC-Q100-qualified PIC16 variants.
