PIC18F442-E/PT - 8-bit 40MHz 16KB Flash MCU 44-TQFP | Microchip
MPN: PIC18F442-E/PT ✓ פעילPIC18F442-E/PT סקירה
A PIC18 microcontroller belongs to Microchip's 8-bit PIC family, which sits in the broader category of microcontrollers (MCU) - self-contained computing subsystems built around a CPU core, program memory, data memory, and integrated peripherals. The PIC18 family uses a RISC architecture with 77 single-word instructions and a 16-bit instruction word, which provides an upgrade path from earlier PIC16 and PIC12 devices while preserving code compatibility. PIC18F parts are commonly used in industrial control, automotive body electronics, and consumer appliances that require deterministic real-time behavior.
Key features include 10 MIPS performance, self-programming Flash, an ICD (In-Circuit Debugger) interface, nanoWatt power management with multiple idle and sleep modes, and an 8-channel 10-bit ADC. The Harvard architecture separates program and data buses for predictable instruction timing, and the peripheral pin-select function (on related F-series devices) simplifies PCB routing.
Typical applications for the PIC18F442-E/PT include industrial automation controllers, automotive body and HVAC modules, sensor signal conditioning, low-cost motor control (with PWM), embedded user interfaces, and battery-powered instruments that benefit from nanoWatt sleep current. The 256-byte EEPROM is useful for storing calibration constants or configuration data without external storage.
When designing with this part, note that the 4.2 V minimum supply voltage precludes true 3.3 V operation - choose the PIC18LF442 variant for low-voltage systems. Also verify the I/O current budget: total source/sink current across all ports must stay within the device's 200 mA aggregate limit.
This page synthesizes distributor pricing, drop-in TQFP-44 alternatives, and practical design notes drawn from Microchip datasheets and the PIC18F family reference manual - data not combined on any single manufacturer or distributor page.
חלופות תחליף ישיר עבור PIC18F442-E/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC18F442-E/PT (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, Package, ADC, Timers, Core Architecture.
PIC18F452-E/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F442-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F452-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F4420-E/PT
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F43K22-E/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F442-E/PT דירוגים מרביים ומאפיינים חשמליים
| Device Family | PIC18F |
| Core | 8-bit PIC18 RISC |
| Program Memory (Flash) | 16 KB (8K x 16 words) |
| Data Memory (RAM) | 768 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Supply Voltage (Vdd) | 4.2 V to 5.5 V |
| טמפרטורת פעולה | -40C to +125C (Extended / Automotive grade) |
| I/O Pins | 36 |
| ADC | 10-bit, 8 channels |
| Capture/Compare/PWM | 2 modules |
| Serial Interfaces | SPI / I2C (MSSP) + USART |
| Timers | 4 (Timer0/1/2/3) |
| מארז | 44-pin TQFP (10x10 mm), 'PT' suffix |
| סוג הרכבה | Surface Mount |
| Instruction Set | 77 instructions, 16-bit word |
| Power-Saving Modes | nanoWatt (Idle, Sleep, RC_RUN) |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC18F442-E/PT
| פין 1 | MCLR/VPP — Reset input / programming voltage |
| פין 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| פין 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| פין 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC Vref- |
| פין 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC Vref+ |
| פין 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| פין 7 | RA5/AN4/SS — PORTA bit 5 / analog input 4 / SPI slave select |
| פין 8 | RE0/RD/AN5 — PORTE bit 0 / parallel read / analog input 5 |
| פין 9 | RE1/WR/AN6 — PORTE bit 1 / parallel write / analog input 6 |
| פין 10 | RE2/CS/AN7 — PORTE bit 2 / parallel chip select / analog input 7 |
| פין 11 | VDD — Positive supply (+5V typical) |
| פין 12 | VSS — Ground |
| פין 13 | OSC1/CLKI — Crystal input / external clock |
| פין 14 | OSC2/CLKO — Crystal output / clock output |
| פין 15 | RC0/T1OSO/T13CKI — PORTC bit 0 / Timer1 oscillator output / Timer1/3 clock |
| פין 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| פין 17 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| פין 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| פין 19 | RD0/PSP0 — PORTD bit 0 / parallel slave port bit 0 |
| פין 20 | RD1/PSP1 — PORTD bit 1 / parallel slave port bit 1 |
| פין 21 | RD2/PSP2 — PORTD bit 2 / parallel slave port bit 2 |
| פין 22 | RD3/PSP3 — PORTD bit 3 / parallel slave port bit 3 |
| פין 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| פין 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| פין 25 | RC6/TX/CK — PORTC bit 6 / USART transmit / USART clock |
| פין 26 | RC7/RX/DT — PORTC bit 7 / USART receive / USART data |
| פין 27 | RD4/PSP4 — PORTD bit 4 / parallel slave port bit 4 |
| פין 28 | RD5/PSP5 — PORTD bit 5 / parallel slave port bit 5 |
| פין 29 | RD6/PSP6 — PORTD bit 6 / parallel slave port bit 6 |
| פין 30 | RD7/PSP7 — PORTD bit 7 / parallel slave port bit 7 |
| פין 31 | VSS — Ground |
| פין 32 | VDD — Positive supply (+5V typical) |
| פין 33 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| פין 34 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| פין 35 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| פין 36 | RB3/CCP2 — PORTB bit 3 / CCP2 output |
| פין 37 | RB4 — PORTB bit 4 |
| פין 38 | RB5 — PORTB bit 5 |
| פין 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| פין 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| פין 41 | NC — Not connected (per datasheet) |
| פין 42 | NC — Not connected (per datasheet) |
| פין 43 | NC — Not connected (per datasheet) |
| פין 44 | NC — Not connected (per datasheet) |
יישומים טיפוסיים
PIC18F442-E/PT מתאים עבור 6 יישוםs: Industrial Automation Controller, Automotive Body Electronics, Sensor Signal Conditioning Node, Low-Cost DC Motor / PWM Control, Embedded User Interface Controller, Battery-Powered Measurement Instrument.
Industrial Automation Controller
The PIC18F442-E/PT fits industrial automation controllers because its 40 MHz CPU (10 MIPS) executes deterministic control loops in well under 1 ms, the 36 I/O lines multiplex buttons, relays, and HMI lines without external logic, and the 10-bit 8-channel ADC reads 4-20 mA sensors with 0.1% resolution. Its 4.2-5.5V supply matches 24V->5V regulator rails common on PLC cards. Compared with newer Cortex-M0 parts, the PIC18F442 has deterministic interrupt latency and the well-documented PIC18 toolchain (MPLAB X + XC8) which simplifies maintenance.
מומלץ
Automotive Body Electronics
The PIC18F442-E/PT operates from -40C to +125C (E-grade) and is therefore suitable for non-safety automotive body modules such as HVAC flaps, seat controllers, mirror adjusters, and lighting nodes. Its 2 CCP/PWM modules drive small DC motors or LED strings directly with 10-bit duty resolution, while the MSSP drives SPI/I2C peripherals (sensor ICs, EEPROM, displays). For OBD-II or CAN-bus body integration, prefer the PIC18F26K80 family; for HVAC the PIC18F442-E/PT remains cost-optimized.
מומלץ
Sensor Signal Conditioning Node
The PIC18F442-E/PT's 8-channel 10-bit ADC samples multiple analog sensors at up to ~50 kS/s aggregate and applies digital filtering in firmware, eliminating external signal-conditioning ICs. The MSSP reads digital sensors (SPI temperature, I2C accelerometers) while the CPU publishes the processed result over USART or SPI. NanoWatt sleep modes reduce quiescent current below 1 uA for battery-driven environmental sensor nodes - useful in wireless mesh or remote-monitoring installations.
מומלץ
Low-Cost DC Motor / PWM Control
The PIC18F442-E/PT's two CCP/PWM modules generate 10-bit PWM outputs up to 40 kHz for brushed DC motors, solenoid drivers, and heater elements. Its 36 I/O handle direction, brake, and tachometer feedback, while the 10 MIPS throughput executes PI control loops at 10 kHz without jitter. The 4.2-5.5V supply powers directly from 5V USB or 6V battery packs - eliminating extra regulators. Drop in the PIC18F452-E/PT for code-heavy field-oriented control (FOC) variants.
מומלץ
Embedded User Interface Controller
The PIC18F442-E/PT drives character LCDs, LED matrices, and keypads with its 36 I/O and USART, hosting menus for appliances, instrument panels, or vending machines. Its 16 KB Flash stores multilingual UI strings, and the 256-byte EEPROM retains user settings through power cycles. The MSSP drives I2C/SPI peripherals such as RTCs, GPIO expanders, and OLED displays. Industrial temperature grade -40C to +85C handles outdoor kiosks and HVAC user interfaces.
מומלץ
Battery-Powered Measurement Instrument
The PIC18F442-E/PT's nanoWatt technology drops quiescent current below 1 uA in Sleep mode and ~10 uA in Idle, enabling multi-year battery life in portable meters, dataloggers, and wireless sensor nodes. The 10-bit ADC and 16 KB Flash store calibration tables in EEPROM and run statistical algorithms in firmware. The 4.2V minimum supply means a 3-cell AA or single Li-ion (3.7V) is not enough; choose the LF variant for true 3.3V operation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC18F442-E/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC18F452-E/PT | PIC18F442-I/PT | PIC18F452-I/PT | PIC18F4420-E/PT | PIC18F43K22-E/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-44 | TQFP-44 - same | TQFP-44 - same | TQFP-44 - same | TQFP-44 - same | TQFP-44 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 32 KB (+100%) | 16 KB (same) | 32 KB (+100%) | 16 KB (same) | 8 KB (-50%) |
| RAM | 768 bytes | 1536 bytes (+100%) | 768 bytes (same) | 1536 bytes (+100%) | 768 bytes (same) | 512 bytes (-33%) |
| EEPROM | 256 bytes | 256 bytes (same) | 256 bytes (same) | 256 bytes (same) | 256 bytes (same) | 256 bytes (same) |
| Maximum Clock | 40 MHz (10 MIPS) | 40 MHz (same) | 40 MHz (same) | 40 MHz (same) | 40 MHz (same) | 64 MHz (60% faster) |
| Operating Temperature | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Extended) |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 1.8 V to 5.5 V (broader) |
| I/O Pins | 36 | 36 (same) | 36 (same) | 36 (same) | 36 (same) | 36 (same) |
מבדילים עיקריים
- Extended -40C to +125C automotive temperature grade (לעומתPIC18F442-I/PT)
- Twice the Flash and RAM of nearest I-grade sibling (לעומתPIC18F452-I/PT)
- 40 MHz PIC18 performance with full peripheral set (לעומתPIC18F43K22-E/PT)
הערות תכנון
The PIC18F442-E/PT requires a clean 5V rail: place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin (pins 11 and 32) and a bulk 10 uF tantalum or ceramic capacitor on the main 5V supply. Estimated: at 40 MHz the core draws ~15 mA, so the regulator should source at least 50 mA with adequate headroom. Below 4.2V the device is out of specification - choose the PIC18LF442 variant for 3.3V systems.
Route the 40 MHz crystal traces (OSC1/OSC2) symmetrically and keep them short, surrounded by a ground pour to minimize EMI. The MCLR/VPP pin needs a 10 kohm pull-up to VDD and a 100 nF capacitor to ground for reliable reset; do not leave it floating. Place ICSP test points (PGC/RB6, PGD/RB7, MCLR, VDD, VSS) on the PCB edge to allow programming without disassembly.
Common pitfalls: (1) Total I/O current per pin is 25 mA source / 25 mA sink, but the aggregate for all pins is limited to 200 mA - exceeding this triggers thermal shutdown. (2) Configuration bits must be set correctly (oscillator, watchdog, brown-out, code protect) - failing to do so leaves the device unprogrammed. (3) The ADC requires the acquisition time (Tad) to be at least 1.6 us; default settings may not work with slow ADC clocks above 1 MHz.
The MSSP/SPI bus on PORTC (RC3 SCK, RC4 SDI/SDA, RC5 SDO) can run up to 10 MHz; at speeds above 5 MHz add 33 ohm series-termination resistors close to the source pins to dampen ringing. The I2C bus requires 4.7 kohm pull-ups to VDD (not 3.3V - the device is 5V); failing to provide adequate pull-up strength produces bus errors above 100 kHz.
מידע על תאימות
RoHS compliant and lead-free per Microchip product page; the 'E' temperature grade is suited for many automotive body-electronics applications per Microchip's product family documentation, though AEC-Q100 conformance is family-level rather than part-level.