PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC
MPN: PIC18F452-I/L ✓ פעילPIC18F452-I/L סקירה
A microcontroller is a single-chip computer that combines a CPU, memory, and programmable peripherals. The PIC18F452 belongs to the 8-bit MCU class within the broader microcontroller hierarchy (8-bit MCU -> MCU -> embedded processor -> semiconductor). Its enhanced PIC18 core offers 77 single-word instructions and C-compiler-friendly architecture, making it popular for both educational and industrial designs.
Key features include eight channels of 10-bit analog-to-digital conversion, two capture/compare/PWM modules, an MSSP configurable as SPI or I2C, a USART, an ICD (in-circuit debugger) interface, and self-programming flash. Operating voltage spans 4.2 V to 5.5 V, and the device supports nanoWatt power management for low-power applications.
The architecture is a Harvard-type RISC design with a 16-bit instruction word and an 8-bit data path, allowing 100 ns instruction execution at 40 MHz. The wide operating range and rich peripheral set make it suitable for industrial automation, motor control, sensor conditioning, and consumer products requiring deterministic real-time response without an external DSP.
Typical applications include industrial control panels, HVAC systems, motor-control boards, USB-to-serial bridges with an external interface IC, and instrumentation front-ends. Designers value the PIC18F452 for upward code compatibility with PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX devices.
A key design consideration is the operating voltage: the 'I' suffix denotes an industrial temperature range of -40 C to +85 C and 4.2 V to 5.5 V supply. Designers migrating to the 'LF' variant must account for the 2.0 V to 5.5 V extended range.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, supporting faster BOM decisions and supply-chain risk mitigation for the PIC18F452-I/L.
חלופות תחליף ישיר עבור PIC18F452-I/L — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC18F452-I/L (אותו גורם צורה וטביעת רגל) — שונים ב Package, Operating Temperature, Timers, Mounting Type, Core Architecture.
PIC18F452-E/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F452T-I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F448-I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F458-I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F442-I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F452-I/L דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PIC18 (8-bit Harvard RISC) |
| תדר שעון מקסימלי | 40 MHz (10 MIPS) |
| Program Memory (Flash) | 32 KB (16K x 16 words) |
| Data SRAM | 1536 bytes |
| Data EEPROM | 256 bytes |
| I/O Pins | 34 |
| מתח אספקה | 4.2 V to 5.5 V |
| טווח טמפרטורת פעולה | -40 C to +85 C (Industrial) |
| Analog-to-Digital Converter | 10-bit, 8 channels |
| Capture/Compare/PWM Modules | 2 CCP |
| Serial Interfaces | MSSP (SPI / I2C), USART |
| Timers | 1 x 8-bit, 3 x 16-bit |
| מארז | 44-pin PLCC (16.59 x 16.59 mm) |
| סוג הרכבה | Surface Mount (PLCC socket compatible) |
| Instruction Set | 77 single-word instructions |
| Self-Programming / ICD | Yes |
| Power-Saving Modes | nanoWatt technology |
תצורת פינים של PIC18F452-I/L
| פין 1 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| פין 2 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| פין 3 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| פין 4 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| פין 5 | RA6/OSC2/CLKO — PORTA bit 6 / Oscillator output |
| פין 6 | RA7/OSC1/CLKI — PORTA bit 7 / Oscillator input |
| פין 7 | VSS — Ground reference |
| פין 8 | VDD — Positive supply (5 V) |
| פין 9 | RB0/INT0 — PORTB bit 0 / External interrupt 0 |
| פין 10 | RB1/INT1 — PORTB bit 1 / External interrupt 1 |
| פין 11 | RB2/INT2 — PORTB bit 2 / External interrupt 2 |
| פין 12 | RB3/CCP2 — PORTB bit 3 / CCP2 output |
| פין 13 | RB4 — PORTB bit 4 |
| פין 14 | RB5/PGM — PORTB bit 5 / LVP programming |
| פין 15 | RB6/PGC — PORTB bit 6 / ICSP clock |
| פין 16 | RB7/PGD — PORTB bit 7 / ICSP data |
| פין 17 | VSS — Ground reference |
| פין 18 | VDD — Positive supply (5 V) |
| פין 19 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator |
| פין 20 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator / CCP2 |
| פין 21 | RC2/CCP1 — PORTC bit 2 / CCP1 output |
| פין 22 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| פין 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| פין 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| פין 25 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| פין 26 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| פין 27 | VSS — Ground reference |
| פין 28 | VDD — Positive supply (5 V) |
| פין 29 | RD0/PSP0 — PORTD bit 0 / Parallel slave port 0 |
| פין 30 | RD1/PSP1 — PORTD bit 1 / Parallel slave port 1 |
| פין 31 | RD2/PSP2 — PORTD bit 2 / Parallel slave port 2 |
| פין 32 | RD3/PSP3 — PORTD bit 3 / Parallel slave port 3 |
| פין 33 | RD4/PSP4 — PORTD bit 4 / Parallel slave port 4 |
| פין 34 | RD5/PSP5 — PORTD bit 5 / Parallel slave port 5 |
| פין 35 | RD6/PSP6 — PORTD bit 6 / Parallel slave port 6 |
| פין 36 | RD7/PSP7 — PORTD bit 7 / Parallel slave port 7 |
| פין 37 | VSS — Ground reference |
| פין 38 | VDD — Positive supply (5 V) |
| פין 39 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| פין 40 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| פין 41 | RE2/CS/AN7 — PORTE bit 2 / Chip select / Analog input 7 |
| פין 42 | VSS — Ground reference |
| פין 43 | VDD — Positive supply (5 V) |
| פין 44 | MCLR/VPP — Master clear reset / Programming voltage |
יישומים טיפוסיים
PIC18F452-I/L מתאים עבור 6 יישוםs: Industrial Control Panels, HVAC Climate Control Boards, Motor Control Drive Boards, Instrumentation Front-Ends, USB-to-Serial Bridge Bridges, Consumer Appliance Controllers.
Industrial Control Panels
The PIC18F452-I/L is widely deployed in industrial control panels where its 34 I/O pins, 8 channels of 10-bit ADC, and 4.2-5.5 V supply range align directly with 24 V-sourced 5 V industrial rails. The 10 MIPS throughput supports real-time polling of sensor inputs, debounce logic, and PWM-driven relay or indicator outputs. Its 256-byte EEPROM stores calibration constants that survive power-cycle events, while self-programming flash enables field firmware updates without removing the MCU from the panel.
מומלץ
HVAC Climate Control Boards
HVAC controller boards leverage the PIC18F452-I/L's 8-channel ADC to read multiple temperature and pressure sensors simultaneously, while its two CCP modules generate PWM signals for fan-speed control and damper actuation. The 32 KB flash accommodates lookup-table-based climate curves and scheduling algorithms, and the nanoWatt power-saving modes reduce standby consumption in thermostat-style products operating from a 5 V wall adapter.
מומלץ
Motor Control Drive Boards
The PIC18F452-I/L drives small brushless DC and stepper motor boards via its two CCP/PWM channels, complemented by three 16-bit timers for quadrature encoder feedback and commutation sequencing. Its 40 MHz operation yields 100 ns instruction execution, enabling deterministic commutation loops at typical 20 kHz PWM frequencies without software jitter. The 5 V supply aligns directly with logic-level gate drivers commonly used in low-voltage motion subsystems.
מומלץ
Instrumentation Front-Ends
Bench-top instrumentation uses the PIC18F452-I/L as a controller for signal conditioning, range selection, and display driving. The 10-bit ADC provides 1024-step resolution suitable for digital multimeters and panel meters, while the MSSP peripheral interfaces with serial ADCs or DACs that demand higher precision. The 1536-byte SRAM supports circular buffers for waveform capture or data-logging applications in test equipment.
מומלץ
USB-to-Serial Bridge Bridges
When paired with an external USB-serial interface IC such as the FT232R or MCP2200, the PIC18F452-I/L functions as the protocol conversion controller for legacy RS-232 equipment. Its USART module handles asynchronous serial communication, while flash-resident command interpreters expose the bridge to host PCs. The 32 KB flash holds USB-class descriptor templates and any vendor-specific command sets required by the legacy peripheral.
מומלץ
Consumer Appliance Controllers
Small kitchen and white-goods appliances embed the PIC18F452-I/L for user-interface multiplexing, sensor reading, and actuator PWM. Its 34 I/O pins drive 7-segment displays, keypad matrices, and indicator LEDs, while the ADC monitors thermistors, level sensors, and current-sensing shunts. The industrial temperature grade supports under-cabinet installation where ambient temperatures can approach 80 C during operation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC18F452-I/L — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC18F452-E/L | PIC18F452T-I/L | PIC18F448-I/L | PIC18F458-I/L | PIC18F442-I/L |
|---|---|---|---|---|---|---|
| Package | 44-PLCC (16.59x16.59 mm) | 44-PLCC - same | 44-PLCC - same | 44-PLCC - same | 44-PLCC - same | 44-PLCC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | PIC18 (8-bit) | PIC18 (8-bit) | PIC18 (8-bit) | PIC18 (8-bit) | PIC18 (8-bit) | PIC18 (8-bit) |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Program Memory (Flash) | 32 KB | 32 KB | 32 KB | 32 KB | 48 KB | 16 KB |
| Data SRAM | 1536 bytes | 1536 bytes | 1536 bytes | 1536 bytes | 2560 bytes | 768 bytes |
| Data EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| CAN Peripheral | No | No | No | Yes (CAN 2.0B) | Yes (CAN 2.0B) | No |
| Operating Temperature | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
מבדילים עיקריים
- Industrial temperature grade with widest Microchip distributor availability (לעומתPIC18F452-E/L)
- Adds CAN 2.0B peripheral for networked industrial designs (לעומתPIC18F448-I/L)
- Larger flash and SRAM headroom with same 44-PLCC footprint (לעומתPIC18F458-I/L)
הערות תכנון
The PIC18F452-I/L requires a stable 5 V supply between 4.2 V and 5.5 V. Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair (pins 8, 18, 28, 38, 43), plus a bulk 10 uF tantalum or ceramic capacitor at the regulator output. During nanoWatt sleep modes, VDD must remain within specification to preserve SRAM contents and EEPROM write integrity.
For 40 MHz operation, use a 10 MHz crystal with the on-chip 4x PLL enabled via the OSCCON register. The HS oscillator mode supports 4 MHz to 25 MHz fundamental crystals; combine with PLL for full 40 MHz. Without PLL, an external 40 MHz clock source must be supplied to OSC1. The 22 pF load capacitors on OSC1/OSC2 should be sized per crystal manufacturer recommendations.
In-Circuit Debugging (ICD) uses pins PGC (RB6) and PGD (RB7). Series resistors (typically 4.7 kOhm) between the debugger and the target are recommended for production boards to isolate the ICSP signals from application circuitry. The MCLR/VPP pin must be pulled high through a resistor (typically 10 kOhm) and accessible for programming voltage during debug sessions.
Estimated: At 40 MHz with all peripherals active, the PIC18F452-I/L typically draws 25-35 mA; in nanoWatt sleep mode this drops to under 5 uA. Always verify MCLR is decoupled with a 100 nF capacitor to prevent spurious resets during supply transients. PORTD pins configured as the Parallel Slave Port must have their TRISD bits set correctly or unexpected bus contention can occur when interfacing external memory.
מידע על תאימות
RoHS and REACH compliance per Microchip product declaration. PLCC package is lead-free. AEC-Q100 not applicable for industrial-grade MCU. MSL-3 moisture sensitivity per JEDEC J-STD-020.
