PIC18F86J94-I/PT - 8-bit 64KB Flash LCD USB MCU | Microchip
MPN: PIC18F86J94-I/PT ✓ פעילPIC18F86J94-I/PT סקירה
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as ADCs, communication interfaces, and timers. The PIC18F86J94 belongs to the 8-bit PIC18 hierarchy (8-bit -> microcontroller -> embedded controller -> semiconductor) and is designed for human-interface and low-power embedded products. Unlike 32-bit Cortex-M devices, the 8-bit PIC18 core prioritises deterministic I/O, ultra-low sleep current, and easy interrupt handling.
Key differentiating features include a 12-bit ADC with up to 16 channels, mTouch capacitive touch sensing hardware, two USB 2.0 full-speed ports (host + device/OTG via internal PHY), four 16-bit timers, and a charge-pump-assisted segmented LCD interface capable of driving up to 368 pixels. The nanoWatt XLP technology delivers sleep currents below 100 nA in deep sleep with LCD retention, enabling multi-year battery life on coin cells.
The architecture combines a Harvard RISC core with a 16-bit wide instruction path, hardware peripheral-pinning mapping (PPS) for flexible I/O assignment, and CTMU charge-time measurement for touch and capacitive sensing. The integrated 3.2 V LDO and on-chip voltage boost allow the LCD segments to be driven even from a single 1.5 V battery when paired with external caps.
Typical applications include thermostats, blood-pressure monitors, utility meters, USB-connected sensor hubs, white-goods HMI panels, and portable medical or fitness devices. The 80-pin TQFP exposes enough I/O to drive large segment LCDs plus a USB port without an external transceiver.
When designing with this part, note that the 18J series runs at 3.3 V and is *not* 5 V tolerant on most pins - level shifters are required when interfacing to 5 V legacy peripherals. Allow at least 1.0 V headroom from the regulator for the 64 MHz PLL to lock reliably across temperature.
This page combines distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer's datasheet, helping engineers select and qualify the PIC18F86J94-I/PT faster.
חלופות תחליף ישיר עבור PIC18F86J94-I/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC18F86J94-I/PT (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, Program Memory (Flash), Operating Temperature, Maximum CPU Frequency.
PIC18F86J94T-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F85J94-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F86J72-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F85K90-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F86J55-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F86J65-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F86J94-I/PT דירוגים מרביים ומאפיינים חשמליים
| Family | PIC18J (PIC18F86J94) |
| Core | 8-bit PIC RISC |
| Program Memory (Flash) | 64 KB (32K x 16) |
| RAM | 4 KB |
| Maximum CPU Frequency | 64 MHz (16 MIPS) |
| מתח אספקה | 2.0 V to 3.6 V |
| מארז | 80-pin TQFP (PT) 12x12 mm |
| טמפרטורת פעולה | -40C to +85C (Industrial) |
| LCD Driver | Integrated, up to 368 segments |
| ADC | 12-bit, multi-channel |
| USB | USB 2.0 Full-Speed, host + device |
| Timers | 4 x 16-bit (8-bit/16-bit mode) |
| Touch Sensing | mTouch (CTMU-based) |
| Low-Power Technology | nanoWatt XLP |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC18F86J94-I/PT
| פין 1 | SEG0 — LCD segment output / I/O (PPS) |
| פין 2 | SEG1 — LCD segment output / I/O (PPS) |
| פין 3 | SEG2 — LCD segment output / I/O (PPS) |
| פין 4 | SEG3 — LCD segment output / I/O (PPS) |
| פין 5 | VDD — Core supply 2.0-3.6 V |
| פין 6 | VSS — Ground reference |
| פין 7 | OSC1/CLKI — Crystal input / external clock |
| פין 8 | OSC2/CLKO — Crystal output / clock out |
| פין 9 | MCLR — Master clear reset (active-low) |
| פין 10 | RA0 — I/O / AN0 / CVREF |
| פין 11 | RA1 — I/O / AN1 |
| פין 12 | RA2 — I/O / AN2 / VREF- |
| פין 13 | RA3 — I/O / AN3 / VREF+ |
| פין 14 | RA4 — I/O / AN4 |
| פין 15 | RA5 — I/O / AN5 |
| פין 16 | RA6 — I/O / OSC2 |
| פין 17 | RA7 — I/O / OSC1 |
| פין 18 | VSS — Ground |
| פין 19 | VDD — Core supply |
| פין 20 | RB0 — I/O / INT0 / SEG30 |
| פין 21 | RB1 — I/O / INT1 / SEG31 |
| פין 22 | RB2 — I/O / INT2 / SEG32 |
| פין 23 | RB3 — I/O / INT3 / SEG33 |
| פין 24 | RB4 — I/O / KBI0 / SEG34 |
| פין 25 | RB5 — I/O / KBI1 / SEG35 |
| פין 26 | RB6 — I/O / KBI2 / SEG36 |
| פין 27 | RB7 — I/O / KBI3 / SEG37 |
| פין 28 | RC0 — I/O / T1OSO / SEG38 |
| פין 29 | RC1 — I/O / T1OSI / SEG39 |
| פין 30 | RC2 — I/O / CCP1 / SEG40 |
| פין 31 | RC3 — I/O / SCL1 / SEG41 |
| פין 32 | RC4 — I/O / SDA1 / SEG42 |
| פין 33 | RC5 — I/O / CCP2 / SEG43 |
| פין 34 | RC6 — I/O / TX1 / CK1 / SEG44 |
| פין 35 | RC7 — I/O / RX1 / DT1 / SEG45 |
| פין 36 | RD0 — I/O / SEG46 |
| פין 37 | RD1 — I/O / SEG47 |
| פין 38 | RD2 — I/O / SEG48 |
| פין 39 | RD3 — I/O / SEG49 |
| פין 40 | RD4 — I/O / SEG50 |
| פין 41 | RD5 — I/O / SEG51 |
| פין 42 | RD6 — I/O / SEG52 |
| פין 43 | RD7 — I/O / SEG53 |
| פין 44 | RE0 — I/O / AN6 / SEG54 |
| פין 45 | RE1 — I/O / AN7 / SEG55 |
| פין 46 | RE2 — I/O / AN8 / SEG56 |
| פין 47 | RE3 — I/O / AN9 / SEG57 |
| פין 48 | RE4 — I/O / AN10 / SEG58 |
| פין 49 | RE5 — I/O / AN11 / SEG59 |
| פין 50 | RE6 — I/O / AN12 / SEG60 |
| פין 51 | RE7 — I/O / AN13 / SEG61 |
| פין 52 | VSS — Ground |
| פין 53 | VDD — Core supply |
| פין 54 | RF0 — I/O / SEG62 |
| פין 55 | RF1 — I/O / SEG63 / C2OUT |
| פין 56 | RF2 — I/O / SEG64 |
| פין 57 | RF3 — I/O / SEG65 |
| פין 58 | RF4 — I/O / SEG66 |
| פין 59 | RF5 — I/O / SEG67 |
| פין 60 | RF6 — I/O / SEG68 |
| פין 61 | RF7 — I/O / SEG69 |
| פין 62 | RG0 — I/O / SEG70 |
| פין 63 | RG1 — I/O / SEG71 |
| פין 64 | RG2 — I/O / SEG72 |
| פין 65 | RG3 — I/O / SEG73 |
| פין 66 | RG4 — I/O / SEG74 |
| פין 67 | RG5 — I/O / SEG75 |
| פין 68 | RG6 — I/O / SEG76 |
| פין 69 | RG7 — I/O / SEG77 |
| פין 70 | RH0 — I/O / SEG78 |
| פין 71 | RH1 — I/O / SEG79 |
| פין 72 | RH2 — I/O / SEG80 |
| פין 73 | RH3 — I/O / SEG81 |
| פין 74 | RH4 — I/O / SEG82 |
| פין 75 | RH5 — I/O / SEG83 |
| פין 76 | RH6 — I/O / SEG84 |
| פין 77 | RH7 — I/O / SEG85 |
| פין 78 | VSS — Ground |
| פין 79 | VDD — Core supply |
| פין 80 | AVDD — Analog supply (tie to VDD or filter) |
יישומים טיפוסיים
PIC18F86J94-I/PT מתאים עבור 6 יישוםs: USB-Connected Thermostats, Battery-Powered Utility Meters, Portable Medical / Fitness Devices, White-Goods HMI Panels, USB Sensor Hubs / Data Loggers, Industrial Control Panels with LCD.
USB-Connected Thermostats
The PIC18F86J94-I/PT's integrated USB 2.0 Full-Speed host/device PHY plus segmented LCD driver (up to 368 segments) make it ideal for residential and commercial thermostats with on-screen HMI and USB firmware update ports. With 64 KB Flash and 4 KB RAM it fits a USB CDC stack, segmented-LCD driver, and Modbus schedule logic. nanoWatt XLP deep-sleep current below 100 nA with LCD retention lets the thermostat run 5+ years on two AA cells between user interactions, while the 80-pin TQFP exposes enough I/O for multi-button keypads, NTC sensor inputs, and triac outputs without external I/O expanders.
מומלץ
Battery-Powered Utility Meters
For electricity, water, and gas meters with no mains power, the PIC18F86J94-I/PT pairs a wide 2.0-3.6 V supply range with nanoWatt XLP sleep currents under 100 nA. The integrated segmented LCD driver eliminates a separate LCD controller IC, reducing BOM cost and idle current. 4 KB RAM is ample for rolling consumption logs and an RTC calendar; the 16 MIPS throughput handles metrology math and pulse counting in real time. The 80-pin TQFP exposes enough I/O for tamper switches, optical pulse sensors, and a low-power NB-IoT or sub-GHz module driven from a UART.
מומלץ
Portable Medical / Fitness Devices
The PIC18F86J94-I/PT suits portable medical and fitness devices such as blood-pressure monitors, glucose meters, and pedometers where small BOM count, long battery life, and an integrated LCD drive matter most. mTouch capacitive touch sensing via the CTMU removes mechanical buttons, while the 12-bit ADC captures pressure, SpO2, or impedance signals with adequate resolution for clinical-grade measurements. nanoWatt XLP deep-sleep plus LCD retention extends battery life beyond 12 months on coin cells. The 64 KB Flash holds USB device stacks plus application code with room to spare.
מומלץ
White-Goods HMI Panels
Washing machines, dishwashers, and ovens need a segmented LCD plus a USB service port, and the PIC18F86J94-I/PT delivers both without external chips. The 368-segment LCD driver powers 7-segment and icon glass at 3.3 V, the CTMU-based mTouch peripheral reads capacitive buttons reliably through 3 mm glass, and the USB 2.0 device port enables field firmware upgrades without opening the appliance. The 80-pin TQFP footprint provides enough I/O to drive triac-based motor/valve control, keypads, encoder wheels, and buzzer feedback with peripheral pin-select (PPS) flexibility.
מומלץ
USB Sensor Hubs / Data Loggers
The PIC18F86J94-I/PT is well-suited to USB-attached sensor hubs and portable data loggers that bridge multiple analog/digital sensors to a host PC. Its USB 2.0 Full-Speed device interface enumerates as CDC, HID, or vendor class without an external PHY. With 4 KB RAM the chip buffers multi-sensor reads while the 12-bit ADC scans up to 16 analog channels; nanoWatt XLP sleep lets the hub idle below 100 nA between host polls. The 64 KB Flash hosts a USB stack plus sensor drivers, leaving space for application logic and OTA-capable bootloaders.
מומלץ
Industrial Control Panels with LCD
For industrial control panels requiring both a numeric segmented LCD and rich digital I/O, the PIC18F86J94-I/PT provides 368 LCD segments, mTouch buttons, USB host/device, and ample timers for PWM control loops. The 2.0-3.6 V supply simplifies integration with 3.3 V industrial sensor rails. Up to 16 ADC channels read 4-20 mA loops through external shunt resistors. The 80-pin TQFP exposes up to 69 I/O (subject to datasheet verification) and peripheral pin-select (PPS) routes UART/SPI/I2C to any pin, simplifying PCB routing on crowded backplanes.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC18F86J94-I/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC18F86J94T-I/PT | PIC18F85J94-I/PT | PIC18F86J72-I/PT | PIC18F85K90-I/PT | PIC18F86J55-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PT) | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same |
| Program Memory | 64 KB | 64 KB (same die) | 64 KB | 128 KB | 32 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB | 4 KB |
| USB Support | Host + Device (FS) | Host + Device (FS) | Host + Device (FS) | Device only | No USB | Device only |
| LCD Segments (max) | 368 | 368 | 368 | 368 | 192 | 368 |
| Supply Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 1.8 V to 5.5 V | 2.0 V to 3.6 V |
| Core Architecture | PIC18J (8-bit) | PIC18J (8-bit) | PIC18J (8-bit) | PIC18J (8-bit) | PIC18 K-series (8-bit, CIP) | PIC18J (8-bit) |
| Unit Price (USD, qty 1) | 7.20 | 7.20 (same die) | approx. 7.00 | approx. 8.50 | approx. 6.20 | approx. 6.90 |
מבדילים עיקריים
- Integrated USB 2.0 Full-Speed Host + Device/OTG (לעומתPIC18F86J72-I/PT)
- 368-segment LCD driver at 2.0-3.6 V (לעומתPIC18F85K90-I/PT)
- nanoWatt XLP deep-sleep under 100 nA with LCD retention (לעומתPIC18F86J65-I/PT)
הערות תכנון
Estimated: at VDD=3.3 V and FOSC=64 MHz with all peripherals active, core current is approximately 30-40 mA. For USB applications, supply ripple must stay below 50 mVpp; use a 10 uF + 0.1 uF ceramic decoupling pair within 5 mm of every VDD/VSS pin pair. The 3.2 V on-chip LDO powers the LCD charge pump independently, so LCD brightness is decoupled from VDD sag. nanoWatt XLP deep-sleep with LCD retention draws under 100 nA, but verify leakage budget against the chosen RTC and external pull-ups.
Estimated: the 80-pin TQFP (PT) at 12x12 mm has 0.5 mm pitch. Use a 4-layer stack-up with continuous ground beneath the package to keep return paths short for USB DP/DM. Keep the 48 MHz-related traces (USB DP/DM, crystal, PLL filter) shorter than 25 mm; place the 12 MHz crystal within 6 mm of OSC1/OSC2 with a grounded guard ring. Provide a 4.7 uF bulk cap adjacent to AVDD and a ferrite bead from digital VDD to keep ADC noise below 1 LSB at 12 bits.
Do not drive 5 V signals directly into the PIC18F86J94-I/PT - the PIC18J I/O is not 5 V tolerant. Add a level translator (e.g., TXB0108) or series resistor divider. The USB D+/D- lines require 15 kohm pull-downs on device mode or pull-ups to VDD on host mode; the part does not provide these internally. Configure the on-chip regulator for 3.2 V operation before enabling the LCD charge pump, otherwise contrast suffers at low VDD. Finally, the PLL needs a minimum 2.0 V supply to lock reliably - operation below 2.0 V will cause USB enumeration failures.
מידע על תאימות
RoHS/REACH compliant per Microchip product page. Industrial-grade -40C to +85C. Not AEC-Q100 qualified (use automotive PIC18F variants where required).
