PIC18LF2220-I/SO - 8-Bit 40MHz MCU, 4KB Flash | Microchip
MPN: PIC18LF2220-I/SO ✓ פעילPIC18LF2220-I/SO סקירה
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (SRAM), digital I/O, and a rich set of on-chip peripherals such as timers, ADC, UART, and I2C/SPI. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> embedded processors -> digital ICs. The PIC18 family is Microchip's high-performance 8-bit architecture, balancing deterministic interrupt latency with C-friendly instruction set, and has been a workhorse for cost-sensitive embedded products for over two decades.
Key features of the PIC18LF2220 include its 10-bit ADC (up to 10 channels), nanoWatt power management for sleep currents down to nanoampere levels, an enhanced 16-bit instruction set with 8-bit data path, and integrated EEPROM emulation. It supports In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD), which is critical for engineers prototyping on prototype boards. The LF suffix indicates low-voltage operation; the non-LF PIC18F2220 is the 4.5 V-5.5 V variant.
Typical use cases include low-power sensor nodes, consumer appliance controllers, white-goods motor control, USB-to-UART bridges (when paired with an external PHY), and battery-powered handheld instruments. The wide 2.0 V-5.5 V range also makes it suitable for 2xAA/3xAA battery stacks and energy-harvesting front-ends.
Designers should pay attention to the 28-pin SOIC footprint selection - the I/SO suffix denotes industrial temperature grade (-40C to +85C) and SOIC package. Stack height and land pattern follow JEDEC SO-28W standards, making PCB layout straightforward.
This page synthesizes cross-distributor pricing, drop-in same-package alternatives, and design notes not aggregated on a single manufacturer or distributor page, providing an at-a-glance comparison for sourcing engineers.
חלופות תחליף ישיר עבור PIC18LF2220-I/SO — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC18LF2220-I/SO (אותו גורם צורה וטביעת רגל) — שונים ב Package, Communication, Core Architecture, ADC, Timers.
PIC18LF2221-I/SO
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18LF2220T-I/SO
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18LF2320-I/SO
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F2220-I/SO
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18F2221-I/SO
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18LF14K22-I/SO
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18LF2220-I/SO דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PIC18 (8-bit RISC, enhanced) |
| CPU Speed | 40 MHz (10 MIPS) |
| Program Memory | 4 KB Flash (2K x 16) |
| Data SRAM | 512 bytes |
| Data EEPROM | 256 bytes (emulated) |
| Digital I/O Pins | 25 |
| ADC | 10-bit, up to 10 channels |
| Supply Voltage Range | 2.0 V to 5.5 V (LF series) |
| טמפרטורת פעולה | -40C to +85C (Industrial) |
| מארז | 28-SOIC (SO, 7.50 mm body) |
| סוג הרכבה | Surface Mount |
| Timers | 4 (Timer0/1/2/3) |
| Communication | UART, I2C (MSSP), SPI (MSSP) |
| Power-Saving Modes | nanoWatt Technology (Sleep, Idle, RC Run) |
| Programming/Debug | ICSP (In-Circuit Serial Programming) + ICD |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC18LF2220-I/SO
| פין 1 | MCLR/Vpp — Master Clear (Reset) input / programming voltage |
| פין 2 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| פין 3 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| פין 4 | RA2/AN2 — Digital I/O / Analog input channel 2 |
| פין 5 | RA3/AN3/Vref+ — Digital I/O / Analog input / ADC positive reference |
| פין 6 | RA4/T0CKI — Digital I/O / Timer0 clock input |
| פין 7 | RA5/SS/AN4 — Digital I/O / SPI Slave Select / Analog input |
| פין 8 | Vss — Ground reference |
| פין 9 | OSC1/CLKI/RA7 — Oscillator crystal input / external clock |
| פין 10 | OSC2/CLKO/RA6 — Oscillator crystal output / clock output |
| פין 11 | RC0/T1OSO/T1CKI — Digital I/O / Timer1 oscillator output |
| פין 12 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / CCP2 |
| פין 13 | RC2/CCP1 — Digital I/O / CCP1 PWM output |
| פין 14 | RC3/SCK/SCL — Digital I/O / SPI clock / I2C clock |
| פין 15 | RC4/SDI/SDA — Digital I/O / SPI data in / I2C data |
| פין 16 | RC5/SDO — Digital I/O / SPI data out |
| פין 17 | RC6/TX/CK — Digital I/O / UART TX / clock |
| פין 18 | RC7/RX/DT — Digital I/O / UART RX / data |
| פין 19 | Vss — Ground reference |
| פין 20 | Vdd — Positive supply voltage (2.0 V to 5.5 V) |
| פין 21 | RB0/INT0 — Digital I/O / External interrupt 0 |
| פין 22 | RB1/INT1 — Digital I/O / External interrupt 1 |
| פין 23 | RB2/INT2 — Digital I/O / External interrupt 2 |
| פין 24 | RB3/CCP2 — Digital I/O / CCP2 PWM |
| פין 25 | RB4 — Digital I/O with interrupt-on-change |
| פין 26 | RB5 — Digital I/O with interrupt-on-change |
| פין 27 | RB6/PGC — Digital I/O / ICSP clock (programming/debug) |
| פין 28 | RB7/PGD — Digital I/O / ICSP data (programming/debug) |
יישומים טיפוסיים
PIC18LF2220-I/SO מתאים עבור 6 יישוםs: Battery-Powered Sensor Nodes, Consumer Appliance Control Panels, USB-to-UART Bridge Dongles, Industrial Process Monitoring, Educational & Hobbyist Embedded Boards, LED Lighting & PWM Dimming Control.
Battery-Powered Sensor Nodes
The PIC18LF2220-I/SO fits battery-powered sensor nodes because its LF low-voltage core operates from 2.0 V to 5.5 V, supporting direct connection to 2-cell AA alkaline (3 V) or 3-cell NiMH (3.6 V) battery stacks without any boost converter. With nanoWatt Technology sleep current below 1 uA and 10 MIPS performance at 40 MHz, the MCU can wake on a timer interrupt, read a sensor via the 10-bit ADC, transmit, and return to sleep, achieving multi-year battery life on a 2000 mAh cell. The 4 KB Flash accommodates a small RTOS or state machine plus BLE/Zigbee application code.
מומלץ
Consumer Appliance Control Panels
The PIC18LF2220-I/SO is well-suited for consumer appliance front-panel controllers such as washing machines, microwave ovens, and dishwashers. Its 25 I/O pins directly drive 7-segment displays, keypads, LED indicators, and triac/MOSFET gate drivers for motor or heater loads, eliminating external I/O expanders. The 40 MHz CPU speed and 10-bit ADC handle rotary encoder inputs, temperature sensing (NTC thermistors), and capacitive touch via software libraries, while the 2.0-5.5 V range supports 3.3 V or 5 V designs.
מומלץ
USB-to-UART Bridge Dongles
The PIC18LF2220-I/SO can serve as the MCU in low-cost USB-to-UART converter dongles, paired with an external USB transceiver. The hardware UART (EUSART) provides reliable asynchronous serial communication up to 115.2 kbaud or higher, while the 2.0-5.5 V supply can be powered directly from USB 5 V or a 3.3 V LDO. With 4 KB Flash, the MCU has enough room for USB CDC class firmware or vendor-specific protocols, and ICSP allows in-field firmware updates over the USB lines.
מומלץ
Industrial Process Monitoring
In industrial 4-20 mA loop sensors, PLC input modules, and remote telemetry units, the PIC18LF2220-I/SO serves as a low-cost signal conditioner. The 10-bit ADC with up to 10 channels multiplexes thermocouple, RTD, pressure transducer, and 4-20 mA shunt inputs, while the hardware I2C/SPI peripherals communicate with external EEPROM for data logging. The industrial -40C to +85C temperature grade covers most factory environments, and the 28-SOIC package survives conformal coating and automated assembly.
מומלץ
Educational & Hobbyist Embedded Boards
The PIC18LF2220-I/SO is widely used in hobbyist kits, PICKit-compatible development boards, and university embedded systems courses. Its 28-SOIC package fits the popular 28-pin PIC development board form factor, and Microchip's MPLAB X IDE + XC8 compiler + PICKit 4 programmer toolchain provides free academic access. The PIC18 architecture's deterministic interrupts and Harvard memory model teach core MCU concepts (timers, ADC, PWM) at a price point suitable for student budgets.
מומלץ
LED Lighting & PWM Dimming Control
The PIC18LF2220-I/SO drives multi-channel LED lighting systems using the CCP/ECCP module for hardware PWM at up to 40 MHz, generating flicker-free dimming curves from 0% to 100% duty cycle. Each I/O pin can source/sink 25 mA, sufficient to drive logic-level MOSFETs directly for high-power LED strings. The 25 I/O pins support RGBW (4 channels) plus status indicators and button inputs. nanoWatt sleep enables standby power below 100 uA for ENERGY STAR compliance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC18LF2220-I/SO — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC18LF2221-I/SO | PIC18LF2220T-I/SO | PIC18LF2320-I/SO | PIC18F2220-I/SO | PIC18F2221-I/SO | PIC18LF14K22-I/SO |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same |
| Supply Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 1.8 V to 3.6 V |
| Flash Memory | 4 KB | 8 KB | 4 KB | 8 KB | 4 KB | 8 KB | 16 KB |
| SRAM | 512 B | 512 B | 512 B | 512 B | 512 B | 512 B | 512 B |
| CPU Speed | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 64 MHz / 16 MIPS |
| I/O Pins | 25 | 25 | 25 | 25 | 25 | 25 | 24 |
| ADC | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 11 channels |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
מבדילים עיקריים
- Lowest-voltage PIC18 in the family (2.0 V start, vs 4.5 V on non-LF) (לעומתPIC18F2220-I/SO)
- Direct upgrade path to 8 KB Flash without PCB change (לעומתPIC18LF2221-I/SO)
- Modern peripheral set vs older PIC16 baseline (לעומתPIC18LF14K22-I/SO)
הערות תכנון
The PIC18LF2220-I/SO nanoWatt Technology supports multiple power-saving modes: Sleep (CPU off, peripherals off, <1 uA typical), Idle (CPU off, peripherals on, ~5.8 uA typical), and RC Run modes. For battery-powered designs, leverage Sleep with Watchdog Timer wake-up every few seconds to read sensors - estimated battery life on a 2000 mAh AA cell exceeds 5 years for a 0.1% duty-cycle sensor read. Always enable the Brown-out Reset (BOR) module via CONFIG register to prevent Flash corruption during voltage dips.
The 28-SOIC package follows JEDEC SO-28W (7.50 mm body width). Use a land pattern with 1.27 mm pitch, pad width 0.6 mm, and pad length 1.8 mm for reliable solder fillets. Place a 100 nF decoupling capacitor as close as possible to pin 20 (Vdd), with a second 10 uF bulk capacitor within 5 mm. Route the ICSP pins (RB6/PGC, RB7/PGD, MCLR/Vpp) to a 5-pin header on the board edge for programming/debug access without disassembling the product.
Do not confuse PIC18LF2220 (2.0-5.5 V) with PIC18F2220 (4.5-5.5 V) - using the non-LF variant below 4.5 V causes Flash programming failures and erratic ADC readings. When migrating firmware between the two, verify CONFIG register settings (especially LVP - Low-Voltage Programming) - LVP must match the toolchain's ICSP voltage levels. Always read the device ID at startup (0x1050 for LF2220, 0x1060 for LF2221) to confirm the expected die before executing peripheral-specific code.
מידע על תאימות
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - this is an industrial-grade part (-40C to +85C). For automotive applications, Microchip offers separate PIC18LF2220 automotive-grade variants on request.
