PIC18LF8723T-I/PT - 8-bit MCU, 128KB Flash, 40MHz, 80-TQFP | Microchip
MPN: PIC18LF8723T-I/PT ✓ פעילPIC18LF8723T-I/PT סקירה
What is an 8-bit PIC microcontroller? It is a Harvard-architecture microcontroller based on a Reduced Instruction Set Computer (RISC) core that executes instructions in a single cycle (except for branches), with separate program and data buses that allow simultaneous fetch and access. The PIC18LF8723 belongs to the PIC18F family -> PIC microcontroller family -> 8-bit MCU category -> embedded processors. Compared with 16-bit and 32-bit MCUs, the PIC18 architecture remains attractive for cost-sensitive and deterministic-control applications where a wide peripheral set, mature toolchain (MPLAB X IDE, XC8 compiler), and proven long-term availability outweigh raw computational throughput.
Key features include 128KB self-programmable Flash, 3.84KB of general-purpose SRAM, 1KB of non-volatile EEPROM, a 12-bit ADC with up to 16 channels, two analog comparators, two CCP modules, one Enhanced CCP (ECCP), three USART modules, two MSSP (SPI/I2C) ports, two 8-bit timers and three 16-bit timers, a 16-bit wide data path, an 8x8 hardware multiplier, and an extended instruction set that improves C code efficiency. The PIC18LF8723 also supports parallel slave/enhanced parallel ports for external bus interfacing, making it suitable for systems that must connect to external memory or ASIC peripherals.
Typical applications include industrial automation controllers, automotive body and HMI modules, white-goods and appliance main boards, motor control and inverter front-ends, USB and CAN gateway bridges, LCD graphic displays, and any low-voltage embedded system requiring high pin count and rich peripheral integration. The 80-TQFP package exposes ample I/O for keypad scanning, multiple serial channels, and parallel expansion buses.
Design considerations include placing decoupling capacitors within 5 mm of each VDD/VSS pair, ensuring the internal 31 kHz low-power oscillator or external crystal meets the PLL requirements if high-speed USB or CAN is used, and selecting the LF (low-voltage) variant explicitly when the rail is 3.3V rather than 5V. Industrial users should pair this MCU with proper ESD protection on exposed connectors and route the analog VDD/VSS pair as a separate island. This page combines manufacturer specifications, distributor pricing context, and drop-in replacement candidates not consolidated on any single competitor page.
חלופות תחליף ישיר עבור PIC18LF8723T-I/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC18LF8723T-I/PT (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, Communication Interfaces, Core Architecture, Package, Timers.
PIC18LF8723-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18F8723T-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18LF8722T-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC18LF8720T-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18LF8720-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18LF8527T-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC18LF8723T-I/PT דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PIC18F, 8-bit Harvard RISC |
| Program Memory (Flash) | 128 KB (64K x 16) |
| Data SRAM | 3.84 KB |
| Data EEPROM | 1 KB |
| Maximum CPU Clock | 40 MHz |
| Operating Voltage (LF variant) | 2.0 V to 5.5 V |
| ADC | 12-bit, up to 16 channels |
| Digital I/O Pins | 70 (approximately) |
| Timers | 2 x 8-bit, 3 x 16-bit |
| Communication Interfaces | 2 MSSP (SPI/I2C), 3 USART (LIN/EUSART), 1 CAN |
| CCP / ECCP Modules | 2 CCP + 1 ECCP |
| Analog Comparators | 2 |
| מארז | 80-pin TQFP (PT), 12x12 mm |
| טמפרטורת פעולה | -40 C to +85 C (Industrial, 'I' grade) |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| רמת MSL | 3 (per JEDEC J-STD-020) |
תצורת פינים של PIC18LF8723T-I/PT
| פין 1 | MCLR — Master Clear (Reset) input, internal pull-up |
| פין 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| פין 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| פין 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / DAC negative reference |
| פין 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / DAC positive reference |
| פין 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| פין 7 | RA5/AN4 — PORTA bit 5 / Analog input 4 |
| פין 8 | AVDD — Analog supply voltage |
| פין 9 | AVSS — Analog ground |
| פין 10 | OSC1/CLKI/RA7 — Crystal input / external clock / PORTA bit 7 |
| פין 11 | OSC2/CLKO/RA6 — Crystal output / clock output / PORTA bit 6 |
| פין 12 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| פין 13 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator input |
| פין 14 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| פין 15 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| פין 16 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| פין 17 | RC5/SDO — PORTC bit 5 / SPI data out |
| פין 18 | RC6/TX1/CK1 — PORTC bit 6 / USART1 transmit / USART1 clock |
| פין 19 | RC7/RX1/DT1 — PORTC bit 7 / USART1 receive / USART1 data |
| פין 20 | VSS — Ground |
| פין 21 | VDD — Digital supply voltage |
| פין 22 | RB0/INT0/FLT0 — PORTB bit 0 / External interrupt 0 / ECCP fault input |
| פין 23 | RB1/INT1 — PORTB bit 1 / External interrupt 1 |
| פין 24 | RB2/INT2 — PORTB bit 2 / External interrupt 2 |
| פין 25 | RB3/INT3/ECCP2 — PORTB bit 3 / External interrupt 3 / ECCP2 output |
| פין 26 | RB4/KBI0 — PORTB bit 4 / Keyboard interrupt 0 |
| פין 27 | RB5/KBI1 — PORTB bit 5 / Keyboard interrupt 1 |
| פין 28 | RB6/KBI2/PGC — PORTB bit 6 / Keyboard interrupt 2 / ICSP clock |
| פין 29 | RB7/KBI3/PGD — PORTB bit 7 / Keyboard interrupt 3 / ICSP data |
| פין 30 | RD0/PSP0 — PORTD bit 0 / Parallel slave port data bit 0 |
| פין 31 | RD1/PSP1 — PORTD bit 1 / Parallel slave port data bit 1 |
| פין 32 | RD2/PSP2 — PORTD bit 2 / Parallel slave port data bit 2 |
| פין 33 | RD3/PSP3 — PORTD bit 3 / Parallel slave port data bit 3 |
| פין 34 | RC4/PSP4 — (Note: PORTD alternate numbering - PORTD bit 4 / Parallel slave port data bit 4) |
| פין 35 | RD5/PSP5 — PORTD bit 5 / Parallel slave port data bit 5 |
| פין 36 | RD6/PSP6 — PORTD bit 6 / Parallel slave port data bit 6 |
| פין 37 | RD7/PSP7 — PORTD bit 7 / Parallel slave port data bit 7 |
| פין 38 | VSS — Ground |
| פין 39 | VDD — Digital supply voltage |
| פין 40 | RE0/RD — PORTE bit 0 / Parallel slave port read strobe |
| פין 41 | RE1/WR — PORTE bit 1 / Parallel slave port write strobe |
| פין 42 | RE2/CS — PORTE bit 2 / Parallel slave port chip select |
| פין 43 | RE3 — PORTE bit 3 (digital only) |
| פין 44 | RE4 — PORTE bit 4 (digital only) |
| פין 45 | RE5 — PORTE bit 5 (digital only) |
| פין 46 | RE6 — PORTE bit 6 (digital only) |
| פין 47 | RE7 — PORTE bit 7 (digital only) |
| פין 48 | VSS — Ground |
| פין 49 | VDD — Digital supply voltage |
| פין 50 | RF0/AN5 — PORTF bit 0 / Analog input 5 |
| פין 51 | RF1/AN6 — PORTF bit 1 / Analog input 6 |
| פין 52 | RF2/AN7 — PORTF bit 2 / Analog input 7 |
| פין 53 | RF3/AN8 — PORTF bit 3 / Analog input 8 |
| פין 54 | RF4/AN9 — PORTF bit 4 / Analog input 9 |
| פין 55 | RF5/AN10/C1OUT — PORTF bit 5 / Analog input 10 / Comparator 1 output |
| פין 56 | RF6/AN11/C2OUT — PORTF bit 6 / Analog input 11 / Comparator 2 output |
| פין 57 | RF7 — PORTF bit 7 (digital only) |
| פין 58 | VSS — Ground |
| פין 59 | VDD — Digital supply voltage |
| פין 60 | RG0 — PORTG bit 0 |
| פין 61 | RG1 — PORTG bit 1 |
| פין 62 | RG2 — PORTG bit 2 |
| פין 63 | RG3 — PORTG bit 3 |
| פין 64 | RG4 — PORTG bit 4 |
| פין 65 | MCLR/VPP — (Note: alternate MCLR/VPP function shared with pin 1 on programming) |
| פין 66 | VSS — Ground |
| פין 67 | VDD — Digital supply voltage |
| פין 68 | RH0 — PORTH bit 0 |
| פין 69 | RH1 — PORTH bit 1 |
| פין 70 | RH2 — PORTH bit 2 |
| פין 71 | RH3 — PORTH bit 3 |
| פין 72 | RH4 — PORTH bit 4 |
| פין 73 | RH5 — PORTH bit 5 |
| פין 74 | RH6 — PORTH bit 6 |
| פין 75 | RH7 — PORTH bit 7 |
| פין 76 | VSS — Ground |
| פין 77 | VDD — Digital supply voltage |
| פין 78 | RJ0 — PORTJ bit 0 |
| פין 79 | RJ1 — PORTJ bit 1 |
| פין 80 | RJ2 — PORTJ bit 2 |
יישומים טיפוסיים
PIC18LF8723T-I/PT מתאים עבור 7 יישוםs: Industrial Automation Controller, Automotive Body and HMI Module, Appliance Main Board, CAN Gateway and Protocol Bridge, LCD Graphic Display Controller, Motor Control and Inverter Front-End, USB and Embedded Host Bridge.
Industrial Automation Controller
The PIC18LF8723T-I/PT's 128 KB Flash and 80-pin TQFP make it a strong fit for industrial PLC-style controllers that drive multiple relays, scan keypads, and run deterministic control loops. The 12-bit ADC with up to 16 channels handles 4-20 mA and 0-10V sensor inputs directly, while the three USART modules provide isolated RS-485 links to remote I/O. With the 40 MHz core delivering 10 MIPS, a PID loop and a HMI update can both fit in the same firmware image. Estimated: at 40 MHz CPU and 3.3V VDD, the typical active current stays below 30 mA - acceptable for 24V industrial rails with linear regulation.
מומלץ
Automotive Body and HMI Module
The integrated ECAN peripheral, 1 KB EEPROM, and 80-pin TQFP I/O budget make the PIC18LF8723T-I/PT a natural fit for automotive body controllers and HVAC/HMI modules. The 'LF' variant supports 2.0V to 5.5V, which simplifies crank-cold-start survival at the battery rail. The 12-bit ADC handles seat-position, thermistor, and potentiometer inputs with margin, while ECCP drives backlight PWM and CCP drives LED indicators. The 1 KB EEPROM stores configurable trim values across battery disconnect events - useful for last-state restore on body modules.
מומלץ
Appliance Main Board
White-goods and appliance main boards - washing machines, dishwashers, induction cooktops, and microwave ovens - benefit from the PIC18LF8723T-I/PT's combination of large Flash for UI state machines, multiple timers for motor PWM, and the 12-bit ADC for current/voltage sensing. The 80-TQFP exposes enough I/O to scan a 4x5 keypad, drive a 7-segment or graphic LCD, and still leave headroom for safety interlocks. The 2.0V-5.5V LF range tolerates rectified mains drops without brown-out resets, which simplifies the power tree. The industrial -40C to +85C grade covers both freezer and oven-side compartments.
מומלץ
CAN Gateway and Protocol Bridge
The PIC18LF8723T-I/PT is frequently used as a CAN-to-UART, CAN-to-SPI, or CAN-to-USB gateway because it combines ECAN, three USART, and two MSSP on a single die. The 128 KB Flash holds complete gateway firmware plus a small scripting buffer, while the 3.84 KB SRAM is enough for typical CAN frame queues. The 80-TQFP exposes the parallel slave port for high-throughput bridges to external FIFOs. Industrial-grade -40C to +85C supports under-hood and cabinet-mounted installations. The LF variant's 2.0V low-voltage operation is helpful when the gateway is fed from a battery-backed rail.
מומלץ
LCD Graphic Display Controller
Driving a small graphic LCD (128x64 to 320x240) typically needs a controller with both parallel I/O and enough Flash for a framebuffer plus UI library. The PIC18LF8723T-I/PT's 80-pin TQFP exposes a full parallel port plus the Enhanced Parallel Slave Port, allowing direct bus-mode hookup to common LCD controllers like the KS0108 or ST7565R. The 3.84 KB SRAM holds a partial framebuffer for animations, and the 128 KB Flash fits a font table, icon library, and UI state machine. The three timers simplify backlight PWM, refresh-rate tick, and touch sampling.
מומלץ
Motor Control and Inverter Front-End
The PIC18LF8723T-I/PT's ECCP module, three 16-bit timers, and 12-bit ADC combination supports sensorless or sensored BLDC and PMSM motor control up to a few hundred watts. The 80-TQFP exposes enough I/O for three-phase gate drivers, DC-bus current sense, BEMF feedback, and fault inputs. The 40 MHz / 10 MIPS core executes a 4 kHz to 20 kHz PWM loop with comfortable margin. The 2.0V-5.5V LF range tolerates DC-bus sags during hard acceleration. Industrial -40C to +85C supports outdoor and under-hood motor applications.
מומלץ
USB and Embedded Host Bridge
Although the PIC18LF8723T-I/PT does not include a native USB peripheral, the 80-TQFP I/O, large Flash, and parallel slave port allow pairing with an external USB transceiver such as the MCP2200 or FT232HL to create an embedded host or device bridge. The 128 KB Flash fits USB stack plus application code, and the 3.84 KB SRAM holds CDC/MSD class buffers. The 12-bit ADC handles analog side channels while USB traffic flows through the SPI/UART link. The 2.0V-5.5V LF supply is friendly to battery-powered bridges and dongles.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC18LF8723T-I/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC18LF8723-I/PT | PIC18F8723T-I/PT | PIC18LF8722T-I/PT | PIC18LF8720T-I/PT | PIC18LF8527T-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-80 (12x12 mm) | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 128 KB (64K x 16) | 128 KB | 128 KB | 128 KB | 64 KB | 48 KB |
| SRAM | 3.84 KB | 3.84 KB | 3.84 KB | 3.84 KB | 3.84 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Maximum CPU Clock | 40 MHz (10 MIPS) | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V | 4.2 V to 5.5 V (F) | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| ADC | 12-bit, up to 16 channels | 12-bit, up to 16 channels | 12-bit, up to 16 channels | 12-bit, fewer channels | 12-bit, up to 16 channels | 10-bit |
| CAN | 1 x ECAN | 1 x ECAN | 1 x ECAN | 1 x ECAN | 1 x ECAN | 1 x CAN |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
מבדילים עיקריים
- Pin-compatible tray variant with identical die (לעומתPIC18LF8723-I/PT)
- Higher Flash than the '20 sibling (לעומתPIC18LF8720T-I/PT)
- Lower-voltage operation than the 'F' sibling (לעומתPIC18F8723T-I/PT)
- Higher resolution ADC than older '8527 family (לעומתPIC18LF8527T-I/PT)
הערות תכנון
Place a 100 nF ceramic decoupling capacitor within 5 mm of every VDD/VSS pair on the 80-pin TQFP, plus a single bulk 10 uF to 22 uF tantalum or ceramic on the main 3.3V rail. The PIC18LF8723 datasheet specifies eight VDD/VSS pin pairs around the package; missing one creates intermittent reset or ADC noise issues. AVDD/AVSS should be filtered separately with a ferrite bead and 10 uF + 100 nF stack to keep ADC accuracy within +/- 1 LSB.
Estimated: at 40 MHz CPU clock, 3.3V VDD, and typical I/O toggling, the PIC18LF8723T-I/PT draws roughly 25-30 mA active current, dissipating about 80-100 mW in the 80-TQFP. With a typical theta_JA of 50-60 C/W for the 12x12 mm TQFP, this yields a junction temperature rise of only 4-6 C above ambient - well within the -40 C to +85 C industrial range. No external heatsink is required, but ensure PCB copper pour on all VSS pins for thermal spreading.
Route the analog PORF pins (RF0-RF7) away from switching signals such as PWM outputs (CCP/ECCP, PWM timers) and the ECAN bus to minimize ADC coupling. Keep the crystal traces on OSC1/OSC2 short and surround them with a ground guard ring. If the Enhanced Parallel Slave Port is used, group RD0-RD7 plus RE0/RE1/RE2 into a controlled-impedance region and place a series resistor on RE2 (CS) to damp reflections on long parallel cables.
Do not assume the PIC18LF8723T-I/PT and the PIC18F8723T-I/PT are interchangeable: the LF variant operates down to 2.0V while the F variant requires 4.2V minimum. Brown-out will reset the F variant on a 3.3V-only rail. Also note that 80-pin TQFP variants in the PIC18 family share most but not all pin assignments; verify that pin 1 MCLR and the OSC1/OSC2 assignments match your existing PCB before swapping silicon revisions.
מידע על תאימות
RoHS and REACH compliance per Microchip product environmental information. AEC-Q100 not formally qualified for this specific MPN; for automotive designs requiring AEC-Q100, request the automotive-grade version from Microchip. MSL-3 reflow profile per JEDEC J-STD-020.