PIC24EP256MC204-E/PT - 16-Bit 60 MIPS MCU 256KB Flash | Microchip
MPN: PIC24EP256MC204-E/PT ✓ פעילPIC24EP256MC204-E/PT סקירה
A 16-bit microcontroller (MCU) is a microprocessor that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals into a single IC. PIC24E MCUs use a modified Harvard RISC architecture with 16-bit instructions and 24-bit instructions for compact code. They belong to the broader category of embedded microcontrollers within power-aware semiconductor ICs used in motor control, industrial automation, and consumer electronics.
Key features include a 70 MIPS CPU performance, dual 40-bit accumulators, single-cycle MAC, hardware multiply/divide, integrated op-amps and 12-bit ADC with up to 500 ksps conversion rate, plus dedicated motor-control PWM with high-resolution edge placement. Communication peripherals cover UART, SPI, I2C, ECAN, and parallel ports for flexible system integration.
The PIC24EP256MC204-E integrates dedicated motor-control peripherals: high-speed PWM with 1.04 ns PWM resolution, quadrature encoder interface, and built-in operational amplifiers. The 60 MIPS core and DSP engine enable real-time closed-loop control algorithms (FOC, PID) without offloading to external DSPs, while the 256KB Flash supports substantial application code and self-programming for field updates.
Typical applications include 3-phase BLDC/PMSM motor drives for appliances, HVAC blower and compressor control, industrial servo control, ceiling fans, e-bike controllers, and drone ESCs. The PIC24E family also targets automotive body electronics, LED lighting drivers, and power conversion digital control when paired with external MOSFET/IGBT drivers.
Design considerations: this MCU operates from 3.0V to 3.6V; a regulated 3.3V rail is mandatory, not 5V-tolerant on most I/O. The -E suffix denotes extended temperature grade (-40C to +125C). Place 0.1uF decoupling capacitors near every VDD/VSS pair, and keep the analog AVSS/AVDD pair isolated with separate ferrite beads for clean ADC readings.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical motor-control design notes not found in the manufacturer datasheet alone.
חלופות תחליף ישיר עבור PIC24EP256MC204-E/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC24EP256MC204-E/PT (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Package, Core Architecture, Maximum CPU Speed, Operating Temperature.
PIC24EP128MC204-E/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24EP256GP204-E/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC24EP256MC204-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24EP256MC204-E/MV
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC24EP256GP204-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24EP256MC204-E/PT דירוגים מרביים ומאפיינים חשמליים
| Core | PIC24E (16-bit dsPIC enhanced) |
| CPU Speed | 60 MIPS (70 MIPS at 3.3V) |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| RAM | 32 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| טמפרטורת פעולה | -40 C to +125 C (extended grade) |
| מארז | 44-pin TQFP (10x10 mm) |
| ADC | 12-bit, up to 500 ksps |
| Op-Amps | Integrated (multiple) |
| PWM | High-speed PWM with 1.04 ns resolution |
| Communication | UART, SPI, I2C, ECAN |
| Quadrature Encoder Interface | Yes |
| DMA | Yes |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC24EP256MC204-E/PT
| פין 1 | RP20/PMD0/OC1/RB0 — Remappable peripheral pin / PWM output / GPIO RB0 |
| פין 2 | RP21/PMD1/OC2/RB1 — Remappable peripheral pin / PWM output / GPIO RB1 |
| פין 3 | AN0/CMP1A/RP5/RB5 — Analog input 0 / comparator / GPIO RB5 |
| פין 4 | AN1/CMP1B/RP6/RB6 — Analog input 1 / comparator / GPIO RB6 |
| פין 5 | AN2/CMP2A/RP7/RB7 — Analog input 2 / comparator / GPIO RB7 |
| פין 6 | AN3/CMP2B/RP8/RB8 — Analog input 3 / comparator / GPIO RB8 |
| פין 7 | AN4/CMP3A/RP9/RB9 — Analog input 4 / comparator / GPIO RB9 |
| פין 8 | AVDD — Analog supply voltage |
| פין 9 | AVSS — Analog ground |
| פין 10 | RP22/OC3/RB10 — Remappable peripheral / PWM output / GPIO RB10 |
| פין 11 | RP23/OC4/RB11 — Remappable peripheral / PWM output / GPIO RB11 |
| פין 12 | RP24/OC5/RB12 — Remappable peripheral / PWM output / GPIO RB12 |
| פין 13 | RP25/OC6/RB13 — Remappable peripheral / PWM output / GPIO RB13 |
| פין 14 | RP26/OC7/RB14 — Remappable peripheral / PWM output / GPIO RB14 |
| פין 15 | RP27/OC8/RB15 — Remappable peripheral / PWM output / GPIO RB15 |
| פין 16 | VDD — Digital supply voltage |
| פין 17 | VSS — Digital ground |
| פין 18 | RA0 — GPIO RA0 |
| פין 19 | RA1 — GPIO RA1 |
| פין 20 | RA2 — GPIO RA2 |
| פין 21 | RA3 — GPIO RA3 |
| פין 22 | RA4 — GPIO RA4 |
| פין 23 | RA5 — GPIO RA5 |
| פין 24 | RA6 — GPIO RA6 |
| פין 25 | RA7 — GPIO RA7 |
| פין 26 | RC0 — GPIO RC0 |
| פין 27 | RC1 — GPIO RC1 |
| פין 28 | RC2 — GPIO RC2 |
| פין 29 | RC3 — GPIO RC3 |
| פין 30 | RC4 — GPIO RC4 |
| פין 31 | RC5 — GPIO RC5 |
| פין 32 | RC6 — GPIO RC6 |
| פין 33 | RC7 — GPIO RC7 |
| פין 34 | RC8 — GPIO RC8 |
| פין 35 | RC9 — GPIO RC9 |
| פין 36 | MCLR — Master clear reset input |
| פין 37 | RP0/RD0 — Remappable peripheral / GPIO RD0 |
| פין 38 | RP1/RD1 — Remappable peripheral / GPIO RD1 |
| פין 39 | RP2/RD2 — Remappable peripheral / GPIO RD2 |
| פין 40 | RP3/RD3 — Remappable peripheral / GPIO RD3 |
| פין 41 | RP4/RD4 — Remappable peripheral / GPIO RD4 |
| פין 42 | RP11/RD5 — Remappable peripheral / GPIO RD5 |
| פין 43 | RP12/RD6 — Remappable peripheral / GPIO RD6 |
| פין 44 | RP13/RD7 — Remappable peripheral / GPIO RD7 |
יישומים טיפוסיים
PIC24EP256MC204-E/PT מתאים עבור 7 יישוםs: BLDC / PMSM Motor Control, Industrial Servo and Stepper Control, Appliance Motor Control (Fans, Pumps, Compressors), Drone and E-Bike Electronic Speed Controllers, Digital Power Conversion Control, Automotive Body Electronics (Non-Safety), Industrial Automation and Robotics.
BLDC / PMSM Motor Control
The PIC24EP256MC204-E/PT is purpose-built for 3-phase brushless DC and permanent magnet synchronous motor control. Its integrated high-speed PWM with 1.04 ns edge resolution paired with the 12-bit 500 ksps ADC enables precise sinusoidal commutation and field-oriented control at high switching frequencies. Built-in op-amps close the current-sense loop directly on-chip, eliminating external current-sense amplifiers. The 70 MIPS DSP core executes FOC, PI, and space-vector modulation in real time within the 44-pin TQFP package. Recommended companion devices are the MCP8026 3-phase gate driver, IRF7507 MOSFETs, and ACS712 current sensor.
מומלץ
Industrial Servo and Stepper Control
The PIC24EP256MC204-E/PT drives closed-loop servo and stepper systems with its quadrature encoder interface, high-resolution PWM, and DSP-class CPU. The QEI module reads incremental encoder feedback directly, offloading cycle counting from the CPU for faster position-loop closure. The extended -40 C to +125 C temperature range allows deployment in factory floor enclosures without additional cooling. Combined with 256 KB Flash and 32 KB RAM, the MCU supports both trapezoidal and S-curve acceleration profiles plus custom homing routines. Recommended companions: SN65HVD75 RS-485 transceiver, TLP181 optocoupler, and DRV8711 stepper driver.
מומלץ
Appliance Motor Control (Fans, Pumps, Compressors)
White goods such as washing machines, dishwashers, refrigerators, and HVAC blowers rely on the PIC24EP256MC204-E/PT for quiet, efficient variable-speed motor control. Sensorless FOC firmware available from Microchip eliminates Hall sensors, reducing BOM cost and improving reliability. The MCU's integrated op-amps interface directly with shunt resistors for current feedback. The 32 KB RAM accommodates both motor-control state machines and user-interface code for touch-button panels and UART command links to a host controller. Recommended companions: TK31N60W MOSFET, MCP1700 LDO, and AT24CM02 EEPROM.
מומלץ
Drone and E-Bike Electronic Speed Controllers
The PIC24EP256MC204-E/PT is widely used in hobbyist and prosumer ESC designs thanks to its high-resolution PWM, fast ADC, and DSP engine. The 70 MIPS throughput runs sensorless FOC at PWM frequencies up to 50 kHz, supporting 6-step and sinusoidal commutation on the same firmware platform. The 256 KB Flash accommodates multiple motor profiles stored for different rotors, while 32 KB RAM buffers telemetry over UART to flight controllers. The compact 44-pin TQFP package fits inside small 20-30 A ESC housings. Recommended companions: SI8261 gate driver, STM32F0 (flight controller side), and MAX31855 thermocouple interface.
מומלץ
Digital Power Conversion Control
Digitally controlled switch-mode power supplies and inverters use the PIC24EP256MC204-E/PT as a high-performance digital controller. The MCU executes digital PID loops, current-mode control, and adaptive dead-time compensation within tight cycle budgets. The high-speed ADC samples feedback at 500 ksps, enabling sub-microsecond control loop latency for multi-kW converters. Built-in op-amps interface with shunt and Hall-effect current sensors directly. The 256 KB Flash supports multiple operating modes and field upgradeable firmware via UART bootloader. Recommended companions: MCP16331 buck controller, Si8261 gate driver, and TLI4970 current sensor.
מומלץ
Automotive Body Electronics (Non-Safety)
Body controllers for HVAC blowers, seat positioners, mirror adjusters, and window lifts deploy the PIC24EP256MC204-E/PT in -40 C to +125 C environments. The extended temperature grade supports under-hood and cabin operation. Integrated ECAN peripheral enables communication with vehicle CAN bus at 1 Mbit/s alongside LIN/UART diagnostics. The 256 KB Flash supports layered firmware with bootloader and application partitions for field updates via CAN. The MCU is not AEC-Q100 qualified but is widely used in non-safety automotive subsystems. Recommended companions: TJA1050 CAN transceiver, MCP2515 stand-alone CAN, and LM5163 buck regulator.
מומלץ
Industrial Automation and Robotics
Factory automation nodes, robotic actuators, and conveyor controllers leverage the PIC24EP256MC204-E/PT for combined motor control, sensor reading, and industrial bus communication. The integrated ECAN, UART, SPI, and I2C peripherals interface with sensors, HMIs, and higher-level PLCs. The DMA controller offloads peripheral data movement, freeing CPU cycles for control algorithms. The MCU's deterministic 60 MIPS performance supports real-time control loops without RTOS overhead in small deterministic systems. Recommended companions: MAX14819 IO-Link transceiver, ADXL345 IMU, and MCP2562 CAN transceiver.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC24EP256MC204-E/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC24EP128MC204-E/PT | PIC24EP256GP204-E/PT | PIC24EP256MC204-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (10x10 mm) | 44-pin TQFP (10x10 mm) - same | 44-pin TQFP (10x10 mm) - same | 44-pin TQFP (10x10 mm) - same |
| Flash Memory | 256 KB | 128 KB (-50%) | 256 KB (same) | 256 KB (same) |
| RAM | 32 KB | 16 KB (-50%) | 32 KB (same) | 32 KB (same) |
| CPU Speed | 70 MIPS at 3.3V | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) |
| Motor-Control Peripherals | PWM + QEI + Op-Amps | PWM + QEI + Op-Amps (same) | General purpose (no PWM/QEI enhancements) | PWM + QEI + Op-Amps (same) |
| Temperature Grade | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) |
| Approx. Unit Price (qty 1) | $5.45 | $4.20 (est., smaller Flash) | $5.10 (est., GP variant) | $5.30 (est., industrial grade) |
מבדילים עיקריים
- Integrated motor-control peripherals reduce BOM (לעומתPIC24EP256GP204-E/PT)
- Extended temperature grade for harsh environments (לעומתPIC24EP256MC204-I/PT)
- Largest memory in PIC24EP 44-pin TQFP family (לעומתPIC24EP128MC204-E/PT)
- Mature Microchip MPLAB X toolchain (לעומתCortex-M3 alternatives (e.g. STM32F103))
הערות תכנון
The PIC24EP256MC204-E/PT requires a regulated 3.0 V to 3.6 V supply; 3.3 V nominal is standard. Use an LDO such as MCP1700 or a switching regulator with low ripple (<50 mV). Place 0.1 uF decoupling capacitors within 5 mm of every VDD/VSS pin pair, with one bulk 10 uF tantalum or ceramic capacitor on the main 3.3 V rail. The analog AVDD/AVSS pair should be isolated from digital VDD/VSS with a ferrite bead or small L-C filter for clean ADC readings. Total current draw including I/O can reach 60 mA at full CPU activity.
Route analog signals (AN0-AN4, op-amp inputs) away from PWM switching traces and the high-current motor phases. Use a ground pour on the top layer beneath the MCU and stitch with vias around the perimeter to suppress noise coupling into ADC readings. Place the crystal oscillator or external clock source within 10 mm of the OSCI/OSCO pins, with a guard ring tied to analog ground. The 44-pin TQFP requires standard 0.8 mm pitch routing - keep out under the package for thermal vias to a bottom-side copper pad.
Do not apply 5 V to any I/O pin - the PIC24EP256MC204-E/PT is NOT 5 V tolerant. Use level shifters (e.g. TXB0108) when interfacing to 5 V logic. Configure unused I/O as outputs driven low, not floating, to minimize current draw. Ensure the MCLR pin has the proper 10 kohm pull-up and decoupling capacitor per Microchip guidelines; missing MCLR hardware causes programming failure. When using the internal op-amps, configure the negative input pin function even if unused, to prevent floating-input shoot-through current.
Estimated: At 70 MIPS continuous operation with all peripherals enabled, internal power dissipation is approximately 80-120 mW (CPU + ADC + PWM + ECAN). Junction-to-ambient thermal resistance for the 44-pin TQFP (10x10 mm) is approximately 40 C/W with standard JEDEC test PCB. At 25 C ambient, junction temperature rise is ~5 C - well within the -40 C to +125 C operating envelope. For high-ambient (>85 C) enclosures, increase copper pour area on top and bottom layers to reduce theta_JA.
מידע על תאימות
RoHS compliant per Microchip product page. Extended -40 C to +125 C temperature grade is NOT equivalent to AEC-Q100 automotive qualification; this part is suitable for industrial and non-safety automotive body electronics but not for safety-critical automotive ECUs.