PIC24F08KA101T-I/SS - 16-Bit 32MHz XLP MCU | Microchip
MPN: PIC24F08KA101T-I/SS ✓ פעילPIC24F08KA101T-I/SS סקירה
A PIC24 microcontroller is a mixed-signal embedded-control IC combining a general-purpose processor, program and data memory, timers, communication interfaces, and analog peripherals on one device. PIC24 devices occupy the middle ground between simple 8-bit microcontrollers and higher-performance 32-bit processors, providing efficient instruction execution, compact code models, and integrated peripherals for motor, sensor, communications, and control applications.
The PIC24F08KA101 family provides 16 GPIO pins, operating frequencies up to 32 MHz, 8 KB of Flash memory, 1 KB of SRAM, and 512 bytes of EEPROM. Its 16 MIPS execution rate supports responsive control loops, while XLP technologies reduce current consumption when the application is inactive. Communication resources include I2C, SPI, IrDA, and UART/USART, enabling the controller to connect sensors, converters, transceivers, and external nonvolatile storage.
The MCU also includes brown-out detection and reset, power-on reset, and the RTCC and watchdog-related low-power resources highlighted by Microchip. Its architecture is suited to designs that periodically wake from deep sleep, acquire or process information, communicate over a serial interface, and return to a low-energy state. The industrial temperature option supports operation from -40 °C to 85 °C.
Typical applications include battery-operated sensors, portable instrumentation, industrial control modules, low-power data loggers, small motor controllers, and connected embedded products. The combination of 20-pin packaging, mixed-signal control, and low-power peripherals allows a compact PCB while preserving enough I/O and communications for local sensing and system management.
Design the decoupling network, programming interface, clock source, and exposed I/O according to the manufacturer datasheet and pin-description table. Confirm that the selected SSOP footprint, programming method, supply voltage, and peripheral assignments match the assembled board before releasing a production PCB.
This page combines the manufacturer product information, distributor specifications, package details, practical application guidance, and carefully qualified replacement options. It also highlights the differences between electrically similar SSOP order codes while avoiding replacements that would require a different footprint or PCB redesign.
חלופות תחליף ישיר עבור PIC24F08KA101T-I/SS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC24F08KA101T-I/SS (אותו גורם צורה וטביעת רגל) — שונים ב Package.
PIC24F08KA101-I/SS
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24F08KA101T-E/SS
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC24F08KA101T-I/SS דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | 16-bit PIC24 |
| תדר שעון מקסימלי | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 8 KB Flash |
| Program Memory Organization | 2.75K x 24 words |
| Data Memory | 1 KB RAM |
| EEPROM | 512 bytes |
| GPIO Count | 16 I/O |
| מארז | 20-pin SSOP |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| טווח טמפרטורת פעולה | -40 °C to 85 °C |
| Serial Interfaces | I2C, SPI, IrDA, UART/USART |
| System Control Features | Brown-out detection/reset and power-on reset |
| Low-Power Features | Deep sleep mode, DSBOR, DSWDT, and RTCC |
| Low-Power Technology | XLP for eXtreme Low Power |
מדריך תצורת פינים של PIC24F08KA101T-I/SS 0.209 inch
תצורת פינים עבור PIC24F08KA101T-I/SS (מארזת 0.209 inch). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור PIC24F08KA101T-I/SS.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC24F08KA101T-I/SS מתאים עבור 6 יישוםs: Battery-Powered Sensor Nodes, Portable Environmental Instruments, Industrial Control Modules, Small Motor and Actuator Control, Low-Power Data Loggers, Connected Service Interfaces.
Battery-Powered Sensor Nodes
PIC24F08KA101T-I/SS fits compact sensor nodes that spend substantial time asleep and must process a reading when awakened. Its 16-bit core supports up to 16 MIPS, allowing sensor conditioning, filtering, and threshold decisions to run locally rather than relying on continuous remote processing. Deep sleep, DSBOR, DSWDT, and RTCC provide the low-power control needed for long operating intervals, while 1 KB of RAM and 512 bytes of EEPROM support working data and retained configuration. The 20-pin SSOP package also leaves board area for a sensor, radio, and power-management circuitry.
מומלץ
Portable Environmental Instruments
The PIC24F08KA101T-I/SS can serve as the control core in a handheld environmental instrument that measures temperature, humidity, or gas concentration. Its 16-bit architecture and 32 MHz clock provide useful arithmetic throughput for conversion sequences, compensation, and display updates, while the XLP low-power modes reduce consumption between measurements. The industrial temperature range of -40 °C to 85 °C also supports deployment outside room-temperature laboratory conditions. Designers should use the datasheet pin table to assign I2C or SPI sensors and reserve programming and reset access for production programming.
מומלץ
Industrial Control Modules
PIC24F08KA101T-I/SS is appropriate for compact industrial control modules that monitor discrete inputs and coordinate actuators through serial interfaces. The 32 MHz core and 16 MIPS throughput allow responsive control logic, while 16 I/O provide connections for sensors, indicators, and local digital controls. Its -40 °C to 85 °C industrial-temperature designation supports operation across industrial ambient conditions, and I2C, SPI, IrDA, and UART/USART connectivity simplifies attachment to sensors, converters, and service interfaces. Brown-out detection and reset improve recovery behavior in systems where supply transients and power sequencing matter.
מומלץ
Small Motor and Actuator Control
The PIC24F08KA101T-I/SS can coordinate small motors, valves, or actuators where compact packaging and low standby consumption matter. Its 16-bit processing core provides more arithmetic headroom than a basic 8-bit controller, while 16 I/O can support switches, position inputs, and drive-control signals. The MCU's deep-sleep capability can reduce energy when the actuator is idle, although motor circuitry may require external drivers and protection. PWM-capable output assignment, current limits, thermal margins, and inductive flyback paths must be established from the datasheet and the selected actuator circuit.
מומלץ
Low-Power Data Loggers
PIC24F08KA101T-I/SS can serve as the central controller in a low-power data logger that periodically records sensor information and stores it in external nonvolatile memory. Its 8 KB of Flash provides program space for logging routines and configuration, while 1 KB of RAM supports short acquisition buffers. I2C and SPI permit connection to serial sensors, memory devices, or real-time components, and the deep-sleep resources help reduce energy between logging intervals. For longer records, external EEPROM or flash should be selected, and the design should protect communications and programming pins from accidental configuration changes.
מומלץ
Connected Service Interfaces
PIC24F08KA101T-I/SS is useful in service and connectivity modules that need local protocol management without a high-power processor. Its UART/USART, I2C, SPI, and IrDA capabilities allow the MCU to manage a sensor, transceiver, or service port while a communications device handles the external link. The 16-bit core executes up to 16 MIPS for protocol framing and low-level state management, and XLP modes help control energy during idle periods. The 20-pin SSOP footprint supports space-efficient assemblies, but designers must verify that the selected communications partner does not require a dedicated high-speed interface unavailable on this device.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC24F08KA101T-I/SS — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC24F08KA101-I/SS | PIC24F08KA101T-E/SS |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP - same | 20-pin SSOP - same |
מבדילים עיקריים
- Target order code combines tape-and-reel delivery with industrial-temperature grading (לעומתPIC24F08KA101-I/SS)
- Matches the closely related E-grade option in package and delivery form (לעומתPIC24F08KA101T-E/SS)
- Combines 16-bit performance with XLP-oriented low-power features (לעומתPIC24F08KA101-I/SS)
הערות תכנון
Use the manufacturer power-supply recommendations to size the local bypass network and place each decoupling capacitor close to its assigned supply pin. Deep sleep can reduce average system energy, but the wake source, oscillator startup time, and active-duration duty cycle determine the useful battery-life benefit. Measure both modes in the finished board because leakage from the sensor, radio, pull resistors, and regulator can dominate standby current.
Keep the 20-pin SSOP footprint, pin-1 orientation, solderable land pattern, and exposed programming pads compatible with the selected assembly process. Route programming and debug access to accessible pads or connectors, and place the MCU away from switching nodes and high-current paths. Verify each signal against the package pin-description table because a shared 20-pin footprint does not guarantee identical peripheral functions across every MCU family.
Do not treat PIC24F08KA101-I/SS as an unconditional substitute for PIC24F08KA101T-I/SS without checking procurement and environmental requirements. The I/SS version omits the target's T packing designation, while the target carries the I industrial-grade code. Also confirm oscillator, programming, brown-out, and peripheral assignments in the Microchip documentation before treating either related order code as a board-level drop-in replacement.
Assign communication lines according to the datasheet pin table and keep sensitive sensor or analog paths away from the PIC24F08KA101T-I/SS supply pins and high-current switching nodes. Provide a stable return path beneath signal routes where practical, and use series damping only where signal-integrity analysis identifies a need. If the MCU drives an SPI bus or other high-speed net, verify rise and fall times at the actual bus capacitance rather than relying only on nominal clock speed.
מידע על תאימות
The manufacturer product page identifies the PIC24F08KA101 as a PIC24 XLP microcontroller for power-constrained and battery-powered applications. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this order code.