PIC24FJ192GA110-E/PT - 16-bit 192KB Flash MCU | Microchip
MPN: PIC24FJ192GA110-E/PT ✓ פעילPIC24FJ192GA110-E/PT סקירה
A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU designed by Microchip for embedded control applications that demand low power, ample memory, and rich connectivity. Within the broader taxonomy it sits between 8-bit PIC MCUs and 32-bit PIC32 devices, balancing code density, peripheral integration, and cost. PIC24F parts share the PIC24 instruction set with 16-bit data paths and execute one instruction per two clock cycles, delivering up to 16 MIPS at 32 MHz while drawing less than 100 nA in standby.
Key features include Peripheral Pin Select (PPS) for flexible I/O mapping, three I2C, three SPI, and four UART serial interfaces, twenty-three independent timers, a 16-channel 10-bit ADC with 500 ksps throughput, hardware RTCC, and selectable power management modes including Sleep, Idle, and Doze. The CTMU peripheral supports capacitive touch sensing, while Parallel Master Port and EPMP-like external bus options address larger memory or graphics subsystems. Operating voltage spans 2.0 V to 3.6 V with 5.5 V-tolerant digital inputs for mixed-voltage designs.
The 100-pin TQFP package exposes up to 85 I/O pins and supports JTAG/ICSP in-system programming plus self-programmability under software control. The architectural sweet spot is battery-powered and connectivity-rich embedded applications where on-chip RAM (16 KB) doubles compared with PIC24FJ64 devices in the same pinout, enabling larger buffers, audio samples, or protocol stacks.
Typical applications include industrial automation controllers, low-power sensor hubs, HMI/graphical displays, USB device-class peripherals, and consumer devices requiring UART/SPI/I2C bridging. The high RAM/flash ratio suits protocol translation, audio streaming, and lightweight graphics rendering.
When designing, take advantage of PPS to remap peripherals to available pins and route analog signals to dedicated ANx pins to minimize digital noise coupling. Plan power sequencing and decoupling per the family reference manual.
This page synthesizes distributor pricing, drop-in PIC24FJ192GA110 family alternatives, and practical design notes not found in the manufacturer datasheet alone.
חלופות תחליף ישיר עבור PIC24FJ192GA110-E/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC24FJ192GA110-E/PT (אותו גורם צורה וטביעת רגל) — שונים ב Package, Operating Temperature, Core Architecture, Timers, ADC.
PIC24FJ192GA110-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128GA110-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ192GA108T-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128GA610-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128GA310-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128GA310T-I/PF
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ192GA110-E/PT דירוגים מרביים ומאפיינים חשמליים
| Architecture | PIC24F 16-bit RISC (modified Harvard) |
| CPU Core | PIC24F, 16-bit data path |
| Maximum CPU Speed | 32 MHz / 16 MIPS |
| Program Flash | 192 KB (65.5K x 24 words) |
| RAM | 16 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| I/O Tolerance | 5.5 V tolerant digital inputs |
| טווח טמפרטורת פעולה | -40C to +125C (extended, -E suffix) |
| I/O Pins | Up to 85 |
| UART | 4 |
| SPI | 3 |
| I2C | 3 |
| Timers | 23 independent |
| ADC | 10-bit, up to 16 channels, 500 ksps |
| Peripheral Pin Select (PPS) | Yes |
| Standby Current | <100 nA (typical, deep Sleep) |
| מארז | 100-pin TQFP (PT), 12x12 mm |
| סוג הרכבה | Surface Mount |
| Programming | ICSP / JTAG, self-programmable under software control |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC24FJ192GA110-E/PT
| פין 1 | RG15 — I/O port RG15 |
| פין 2 | VDD — Positive supply voltage (2.0V-3.6V) |
| פין 3 | RC1 — I/O port RC1 |
| פין 4 | RC2 — I/O port RC2 |
| פין 5 | RC3 — I/O port RC3 |
| פין 6 | RC4 — I/O port RC4 |
| פין 7 | VSS — Ground reference |
| פין 8 | RC13 — I/O port RC13 |
| פין 9 | RC14 — I/O port RC14 |
| פין 10 | RD0 — I/O port RD0 |
| פין 11 | RD1 — I/O port RD1 |
| פין 12 | RD2 — I/O port RD2 |
| פין 13 | RD3 — I/O port RD3 |
| פין 14 | RD4 — I/O port RD4 |
| פין 15 | RD5 — I/O port RD5 |
| פין 16 | RD6 — I/O port RD6 |
| פין 17 | RD7 — I/O port RD7 |
| פין 18 | RD8 — I/O port RD8 |
| פין 19 | RD9 — I/O port RD9 |
| פין 20 | RD10 — I/O port RD10 |
| פין 21 | RD11 — I/O port RD11 |
| פין 22 | VSS — Ground reference |
| פין 23 | VDD — Positive supply voltage |
| פין 24 | RD12 — I/O port RD12 |
| פין 25 | RD13 — I/O port RD13 |
| פין 26 | RD14 — I/O port RD14 |
| פין 27 | RD15 — I/O port RD15 |
| פין 28 | AVDD — Analog positive supply |
| פין 29 | AVSS — Analog ground |
| פין 30 | RB5 — I/O port RB5 / AN5 |
| פין 31 | RB4 — I/O port RB4 / AN4 |
| פין 32 | RB3 — I/O port RB3 / AN3 |
| פין 33 | RB2 — I/O port RB2 / AN2 |
| פין 34 | RB1 — I/O port RB1 / AN1 |
| פין 35 | RB0 — I/O port RB0 / AN0 |
| פין 36 | RB6 — I/O port RB6 |
| פין 37 | RB7 — I/O port RB7 |
| פין 38 | RB8 — I/O port RB8 |
| פין 39 | RB9 — I/O port RB9 |
| פין 40 | VSS — Ground reference |
| פין 41 | VDD — Positive supply voltage |
| פין 42 | RB10 — I/O port RB10 |
| פין 43 | RB11 — I/O port RB11 |
| פין 44 | RB12 — I/O port RB12 |
| פין 45 | RB13 — I/O port RB13 |
| פין 46 | RB14 — I/O port RB14 |
| פין 47 | RB15 — I/O port RB15 |
| פין 48 | RF0 — I/O port RF0 |
| פין 49 | RF1 — I/O port RF1 |
| פין 50 | RF2 — I/O port RF2 |
| פין 51 | RF3 — I/O port RF3 |
| פין 52 | RF4 — I/O port RF4 |
| פין 53 | RF5 — I/O port RF5 |
| פין 54 | VSS — Ground reference |
| פין 55 | VDD — Positive supply voltage |
| פין 56 | RF6 — I/O port RF6 |
| פין 57 | RF7 — I/O port RF7 |
| פין 58 | RF8 — I/O port RF8 |
| פין 59 | RF9 — I/O port RF9 |
| פין 60 | RF10 — I/O port RF10 |
| פין 61 | RF11 — I/O port RF11 |
| פין 62 | RF12 — I/O port RF12 |
| פין 63 | RD0 — I/O port RD0 (secondary) |
| פין 64 | OSC1 — Crystal oscillator input |
| פין 65 | OSC2 — Crystal oscillator output |
| פין 66 | MCLR — Master clear / reset input |
| פין 67 | RG0 — I/O port RG0 |
| פין 68 | RG1 — I/O port RG1 |
| פין 69 | RG2 — I/O port RG2 |
| פין 70 | RG3 — I/O port RG3 |
| פין 71 | RG4 — I/O port RG4 |
| פין 72 | RG5 — I/O port RG5 |
| פין 73 | RG6 — I/O port RG6 |
| פין 74 | RG7 — I/O port RG7 |
| פין 75 | RG8 — I/O port RG8 |
| פין 76 | RG9 — I/O port RG9 |
| פין 77 | RA0 — I/O port RA0 |
| פין 78 | RA1 — I/O port RA1 |
| פין 79 | RA2 — I/O port RA2 |
| פין 80 | RA3 — I/O port RA3 |
| פין 81 | RA4 — I/O port RA4 |
| פין 82 | RA5 — I/O port RA5 |
| פין 83 | RA6 — I/O port RA6 |
| פין 84 | RA7 — I/O port RA7 |
| פין 85 | RA8 — I/O port RA8 |
| פין 86 | RA9 — I/O port RA9 |
| פין 87 | RA10 — I/O port RA10 |
| פין 88 | RA11 — I/O port RA11 |
| פין 89 | RA12 — I/O port RA12 |
| פין 90 | RA13 — I/O port RA13 |
| פין 91 | RA14 — I/O port RA14 |
| פין 92 | RA15 — I/O port RA15 |
| פין 93 | VSS — Ground reference |
| פין 94 | VDD — Positive supply voltage |
| פין 95 | RE0 — I/O port RE0 |
| פין 96 | RE1 — I/O port RE1 |
| פין 97 | RE2 — I/O port RE2 |
| פין 98 | RE3 — I/O port RE3 |
| פין 99 | RE4 — I/O port RE4 |
| פין 100 | RE5 — I/O port RE5 |
יישומים טיפוסיים
PIC24FJ192GA110-E/PT מתאים עבור 7 יישוםs: Industrial Automation Controllers, Low-Power Sensor Hubs, HMI and Graphical Displays, USB Device-Class Peripherals, Audio and Voice Processing, Consumer Connectivity Devices, Automotive Body Electronics.
Industrial Automation Controllers
The PIC24FJ192GA110-E/PT fits industrial automation controllers with 192 KB flash and 16 KB RAM, which provide headroom for ladder-logic interpreters, Modbus RTU stacks, and PID control loops. The 4 UARTs handle RS-232/RS-485 multi-drop networks, while 3 SPI and 3 I2C interfaces drive sensor front-ends and HMI displays. The -40C to +125C extended temperature grade meets factory-floor thermal demands, and PPS allows flexible PCB routing of peripherals into mixed connector pinouts.
מומלץ
Low-Power Sensor Hubs
For battery-powered wireless sensor hubs, the PIC24FJ192GA110-E/PT draws under 100 nA in deep Sleep, waking via RTCC or external interrupts to service sensor reads and radio packets. The 16 KB RAM accommodates protocol buffers for Zigbee, LoRa, or Bluetooth Low Energy, while 192 KB flash stores multiple protocol stacks and OTA update images. PPS routes I2C sensors, SPI radios, and UART debug ports without pin conflicts across different sensor boards.
מומלץ
HMI and Graphical Displays
The PIC24FJ192GA110-E/PT drives character or small graphical LCDs via PMP/EPMP-style external bus and CTMU capacitive touch sensing, making it a strong host for HMI panels. The 192 KB flash stores multi-language menus, animations, and graphics tables, while 16 KB RAM serves as framebuffer for monochrome or grayscale displays. PPS allows direct mapping of PMP data lines to available ports, simplifying PCB layout for slim HMI enclosures.
מומלץ
USB Device-Class Peripherals
USB device-class peripherals such as HID input devices, CDC virtual COM ports, and MSD card readers benefit from the PIC24FJ192GA110-E/PT's 4 UART, 3 SPI, and full-speed USB-friendly PIC24F core. The 16 KB RAM buffers USB packets and protocol stacks, while 192 KB flash fits composite USB descriptors and application code. The 5.5 V-tolerant digital inputs tolerate USB bus-powered 5 V signal levels when properly attenuated.
מומלץ
Audio and Voice Processing
Voice playback, audio effects, and speech-recognition front-ends benefit from the PIC24FJ192GA110-E/PT's 16 KB RAM, which holds several seconds of ADPCM-encoded audio at typical sample rates. The 192 KB flash stores lookup tables, codecs, and phrase libraries, while the 4 UARTs drive external DACs or audio CODECs. PPS routes I2S-style clocks to available pins, and the 32 MHz / 16 MIPS core sustains real-time DSP for lightweight filtering and FFT.
מומלץ
Consumer Connectivity Devices
Smart-home gateways, wearable companions, and BLE-MCU bridges run on the PIC24FJ192GA110-E/PT thanks to its multi-protocol serial interfaces and ample memory. The 4 UARTs handle WiFi/BLE module control and AT-command parsing, while SPI and I2C drive sensors and displays. Sub-100 nA Sleep current extends battery life in standby, and the -40C to +125C extended grade supports wearables and outdoor IoT enclosures.
מומלץ
Automotive Body Electronics
Automotive body controllers and lighting modules benefit from the PIC24FJ192GA110-E/PT's extended -40C to +125C temperature grade, 5.5 V-tolerant digital inputs, and rich timer set. The 4 UARTs drive LIN or K-Line transceivers, while CAN is handled via external controllers tied to SPI. PPS simplifies pinout adaptation when migrating between different vehicle harness connectors, and 192 KB flash stores bootloaders plus application code.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC24FJ192GA110-E/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC24FJ192GA110-I/PT | PIC24FJ128GA110-I/PT | PIC24FJ192GA108T-I/PT | PIC24FJ128GA610-I/PT | PIC24FJ128GA310-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PT, 12x12 mm) | 100-pin TQFP (PT, 12x12 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same |
| Program Flash | 192 KB | 192 KB | 128 KB (-33%) | 192 KB | 128 KB (-33%) | 128 KB (-33%) |
| RAM | 16 KB | 16 KB | 8 KB (-50%) | 16 KB | 8 KB (-50%) | 8 KB (-50%) |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Temperature | -40C to +125C (extended, -E) | -40C to +85C (industrial, -I) | -40C to +85C (industrial, -I) | -40C to +85C (industrial, -I) | -40C to +85C (industrial, -I) | -40C to +85C (industrial, -I) |
| Peripheral Pin Select (PPS) | Yes | Yes | Yes | Yes | Yes | Yes |
| UART / SPI / I2C | 4 / 3 / 3 | 4 / 3 / 3 | 4 / 3 / 3 | 4 / 3 / 3 | 4 / 3 / 3 | 4 / 3 / 3 |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
מבדילים עיקריים
- Higher flash and RAM in same 100-pin TQFP package (לעומתPIC24FJ128GA110-I/PT)
- Extended -40C to +125C temperature grade in identical footprint (לעומתPIC24FJ192GA110-I/PT)
- Peripheral Pin Select (PPS) for layout flexibility (לעומתPIC24FJ128GA106-I/PT (64-pin TQFP variant))
הערות תכנון
Estimated: at VDD=3.3 V, the PIC24FJ192GA110-E/PT draws approximately 15 to 25 mA at 32 MHz active with all peripherals on, falling to under 100 nA in deep Sleep with RTCC off. For battery-powered designs, gate peripheral power via Load Switches or I/O port-controlled regulators, and use Sleep + RTCC scheduling rather than Idle for maximum battery life. Decouple VDD/AVDD with 100 nF ceramic plus 10 uF bulk per the Microchip PIC24F reference manual design checklist.
Route the 100-pin TQFP (12x12 mm) on a 4-layer PCB with continuous ground plane under the device and a star-grounded analog section for AVDD/AVSS. Keep the 32.768 kHz secondary oscillator traces short and guarded by ground to minimize RTCC drift. Place bulk capacitors within 10 mm of VDD pins; place 100 nF bypass caps within 2 mm of every VDD pin. Expose MCLR to a 10 kohm pull-up and a 100 nF cap for clean reset behavior.
Group PPS-mapped digital peripherals on one side of the device to simplify pinout reuse across PIC24FJ128 and PIC24FJ192 variants. Keep ADC ANx pins separated from PWM and high-frequency digital lines by a ground guard or by physical separation to preserve ADC SNR. When using EPMP-style external bus, place the memory device close to the PIC24FJ192GA110-E/PT and add series damping resistors if the bus exceeds 50 MHz equivalent switching rate.
Do not exceed 3.6 V on VDD, or 5.5 V on 5.5 V-tolerant digital I/O pins. Always unlock PPS via the IOLOCK sequence before remapping peripherals; locked PPS causes silent peripheral failures on first prototype. Verify AVDD and VDD power up within 10 ms of each other; failure to do so can latch the ADC into an undefined state. Use the Microchip MCC or Harmony configurator to avoid configuration register mistakes.
For SPI bus runs above 10 MHz, place 22 to 33 ohm series resistors near the driver pins to dampen ringing on long PCB traces. I2C lines exceeding 100 mm benefit from 4.7 kohm pull-ups and a 100 pF to 470 pF speed-up cap on standard-mode segments. Route USB differential pairs (D+/D-) with 90 ohm differential impedance when the design includes the on-chip USB peripheral or external USB bridge.
מידע על תאימות
RoHS and lead-free per Microchip product page. AEC-Q100 not qualified - choose PIC24FJ192GA110-E/Pxxx variants or PIC24HJ automotive-grade parts for automotive designs. Halogen-free status not explicitly confirmed in verified data.
