PIC32MZ1024EFM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN: PIC32MZ1024EFM100-I/PT ✓ פעילPIC32MZ1024EFM100-I/PT סקירה
A 32-bit microcontroller (MCU) is an integrated system-on-chip that combines a high-performance processor core, program and data memory, and a rich set of peripherals on a single silicon die. Within the broader hierarchy, a microcontroller sits under microprocessor units (MPUs) for embedded control, itself a category of integrated circuits (ICs). The PIC32MZ EF family specifically targets connectivity-rich applications where deterministic real-time control must coexist with high-throughput wired/wireless communication stacks.
Key features of the PIC32MZ1024EFM100-I/PT include DSP-enhanced core instructions (single-cycle MAC, four 64-bit accumulators, saturating and fractional math), a 12-bit 18-MSPS ADC with up to 40 analog inputs, six UART, four SPI, and I2S audio interfaces, plus a 16-bit parallel master port. The integrated crypto engine supports AES, 3DES, SHA, MD5, HMAC and RNG, allowing hardware-accelerated TLS/DTLS without taxing the application CPU.
Architecturally, the PIC32MZ EF implements an M-Class MIPS core with a 5-stage pipeline and tightly-coupled prefetch cache, allowing sustained execution near the 200 MHz clock. The peripheral bus matrix provides DMA-driven data movement so that Ethernet, USB, and crypto transactions can proceed in parallel with mainline code execution, enabling deterministic latency even under heavy protocol load.
Typical applications include industrial IoT gateways, automotive HMI and graphics dashboards, secure connected appliances, motor control, and high-speed point-of-sale terminals. The wide connectivity set (Ethernet, USB-HS, CAN, USB device/host/OTG) plus the crypto engine make it particularly well-suited to networked embedded designs that require TLS acceleration.
When designing in this part, allocate the dual PGECx/PGEDx pairs carefully for ICSP programming, and verify that the high-current GPIO banks are supplied from a low-impedance rail to meet USB-HS and Ethernet PHY requirements. The exposed thermal pad of the TQFP package should be soldered to a copper pour for reliable thermal performance.
This page synthesizes distributor pricing, drop-in alternatives, and design notes that complement the manufacturer datasheet, helping engineers select the right PIC32MZ variant for connectivity, HMI, or motor-control projects.
חלופות תחליף ישיר עבור PIC32MZ1024EFM100-I/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC32MZ1024EFM100-I/PT (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Core Architecture, Package, Crypto Engine, Operating Temperature.
PIC32MZ1024EFH100T-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MZ1024EFE100-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MZ1024ECG100-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MZ1024EFK100T-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MZ0512EFM100-I/PT
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PIC32MZ1024EFG100-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MZ1024EFM100-I/PT דירוגים מרביים ומאפיינים חשמליים
| Core | MIPS32 M-Class |
| Core Architecture | 32-bit RISC with FPU and DSP extensions |
| Maximum CPU Speed | 200 MHz (330 DMIPS) |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| טמפרטורת פעולה | -40C to +85C (Industrial) |
| מארז | 100-pin TQFP (12x12 mm) |
| סוג הרכבה | Surface Mount |
| ADC | 12-bit, up to 18 MSPS, up to 40 channels |
| Communication Interfaces | USB-HS, 10/100 Ethernet MAC, 2x CAN 2.0b, 6x UART, 4x SPI, I2S, PMP |
| Crypto Engine | AES, 3DES, SHA, MD5, HMAC, RNG |
| I/O Pins | 78 GPIO |
| DMA Channels | 8 |
| Timers | 9 16-bit, 4 32-bit |
| סטטוס RoHS | Compliant |
| רמת MSL | 3 |
| Lifecycle | Active |
מדריך תצורת פינים של PIC32MZ1024EFM100-I/PT 100-pin tqfp (12x12 mm)
תצורת פינים עבור PIC32MZ1024EFM100-I/PT (מארזת 100-pin tqfp (12x12 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור PIC32MZ1024EFM100-I/PT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC32MZ1024EFM100-I/PT מתאים עבור 6 יישוםs: Industrial IoT Gateway, Automotive HMI and Graphics, Secure Connected Appliance, Motor Control and Field-Oriented Control, High-Speed Point-of-Sale Terminal, Industrial Audio Processing.
Industrial IoT Gateway
The PIC32MZ1024EFM100-I/PT's 200 MHz MIPS core, integrated 10/100 Ethernet MAC, USB-HS, and crypto engine make it ideal for industrial IoT gateways aggregating field-bus data over CAN 2.0b while publishing to cloud servers over TLS-secured Ethernet. The 1 MB Flash accommodates full protocol stacks including TLS, MQTT, and Modbus/TCP, and the 512 KB SRAM buffers network bursts without external memory. The hardware AES/SHA accelerator handles TLS handshakes without blocking the main application CPU.
מומלץ
Automotive HMI and Graphics
The PIC32MZ1024EFM100-I/PT is well-suited for automotive infotainment and instrument cluster HMI nodes, where the parallel master port (PMP) drives TFT LCD displays directly. The 200 MHz core renders graphics at 30+ fps while the integrated 12-bit ADC samples analog sensor inputs. The crypto engine secures vehicle-to-cloud communications, and dual CAN interfaces tie into the vehicle bus. Industrial-grade -40C to +85C operation covers cabin and engine-bay-adjacent deployments.
מומלץ
Secure Connected Appliance
The PIC32MZ1024EFM100-I/PT's hardware crypto engine provides AES and SHA acceleration for TLS-secured cloud connectivity in smart appliances. USB-HS enables Wi-Fi module bridging through a USB host stack, while the on-chip Ethernet MAC allows direct LAN attachment. The 1 MB Flash holds the full TCP/IP stack plus application firmware, and the DMA controllers manage USB and Ethernet packet transfers in parallel with user-interface logic.
מומלץ
Motor Control and Field-Oriented Control
The PIC32MZ1024EFM100-I/PT's 200 MHz DSP-enhanced core executes field-oriented control (FOC) loops for brushless DC and PMSM motors at switching frequencies above 20 kHz. The 12-bit 18-MSPS ADC samples phase currents with microsecond latency, while six PWM channels drive the inverter. The on-chip crypto engine enables secure factory commissioning and over-the-air firmware updates, and the 78 GPIO provide encoder and communication interfaces.
מומלץ
High-Speed Point-of-Sale Terminal
The PIC32MZ1024EFM100-I/PT serves as the main processor in POS terminals requiring encrypted card transactions and rich user interfaces. The hardware AES engine accelerates EMV chip card cryptography, while the parallel master port drives the LCD and touch controller. USB-HS supports receipt printers and barcode scanners, and the 10/100 Ethernet MAC provides wired LAN connectivity. The 512 KB SRAM handles transaction buffers and TLS scratch memory.
מומלץ
Industrial Audio Processing
The PIC32MZ1024EFM100-I/PT's I2S interface and DSP-enhanced core handle multi-channel audio processing for industrial PA and intercom systems. The 200 MHz core runs audio codecs and acoustic echo cancellation in real time, while the 12-bit ADC provides microphone pre-digitization. The on-chip crypto engine secures SIP-based voice communication over Ethernet. Industrial-grade temperature operation supports factory floor deployment with extended ambient temperature ranges.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC32MZ1024EFM100-I/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC32MZ1024EFH100T-I/PT | PIC32MZ1024EFE100-I/PT | PIC32MZ1024EFG100-I/PT | PIC32MZ1024EFK100T-I/PT | PIC32MZ0512EFM100-I/PT | PIC32MZ1024ECG100-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same |
| Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB (max 2 MB family) | 512 KB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto | Yes (AES/3DES/SHA) | Yes | No | No | Yes | Yes | No |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| USB-HS | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| CAN 2.0b | 2x | 2x | 2x | 2x | 2x | 2x | 2x |
מבדילים עיקריים
- Integrated hardware crypto engine (לעומתPIC32MZ1024EFE100-I/PT)
- Highest-integration 32-bit MCU in the 100-pin class (לעומתPIC32MX795F512L-80I/PT)
- DSP-enhanced core with FPU (לעומתPIC32MZ1024EFG100-I/PT)
הערות תכנון
The PIC32MZ1024EFM100-I/PT operates from 2.3 V to 3.6 V. Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 5 mm of the pins, and add a single 10 uF bulk capacitor near the package. The high-current digital supply pins driving USB-HS transceivers and the Ethernet PHY MII/RMII bus should be fed from a low-impedance rail to minimize switching noise coupling into the ADC.
At 200 MHz with all peripherals active, the TQFP-100 12x12 mm package dissipates approximately 0.5-0.7 W typical. The exposed thermal pad must be soldered to a copper pour of at least 1 square inch on the top layer to keep junction temperature within industrial-grade limits. Without this thermal pad connection, derate by 30-40% for sustained full-speed operation at elevated ambient temperatures.
Route the USB D+/D- differential pair as a 90-ohm impedance-matched length-matched trace within 50 mm of the package. The Ethernet MII/RMII traces to the external PHY should be length-matched to within 25 mm and shielded from switching signals. Place the 25 MHz crystal within 8 mm of the OSC1/OSC2 pins with a grounded guard ring to minimize EMI pickup that could disrupt USB-HS signaling.
Ensure the ICSP programming pair selection (PGEC1/PGED1, PGEC2/PGED2, or PGEC3/PGED3) does not conflict with peripheral assignments on the same pins. The dual JTAG/ICSP function on these pins requires careful configuration in the device configuration bits. Also, leave the AVDD/AVSS supply pair separately filtered to avoid digital switching noise coupling into the 12-bit ADC measurements.
מידע על תאימות
RoHS compliant per Microchip product page. Industrial-grade -40C to +85C operating range. ECCN 5A992.c. No AEC-Q100 qualification for this industrial variant; AEC-Q100 qualified parts available in PIC32MZ EF automotive grade family.
