R5F104LGAFB#30 - 32MHz 16-Bit RL78/G14 MCU | Renesas
MPN: R5F104LGAFB#30 ✗ סוף ייצורR5F104LGAFB#30 סקירה
An RL78 microcontroller is a low-power embedded processing platform within the broader semiconductor and microcontroller hierarchy. It combines a CPU core, nonvolatile program memory, data memory, peripherals, and interrupt-driven control logic on one integrated circuit. This integration allows a meter, industrial controller, or compact motor-control system to replace separate processor and support devices while reducing board area and power consumption.
The R5F104LGAFB#30 provides 128 KB of code flash, a 32 MHz maximum clock, and low-power operating modes identified by Renesas as part of the RL78/G14 family. Its 1.6 V minimum operating voltage supports low-energy designs, while the 64-LFQFP package provides 64 accessible pins for external interfaces and mixed-signal connections. The component is intended for motor control, industrial equipment, and metering systems.
The RL78/G14 family reaches 44 DMIPS at 32 MHz according to the manufacturer datasheet, providing meaningful processing performance without moving to a larger high-power processor architecture. Peripheral integration can reduce the need for external amplifiers, interface drivers, and discrete logic. Firmware can use timers for pulse-width modulation and motor timing, serial interfaces for sensor and communications links, and analog resources for measurements.
Typical uses include electric motor controllers, industrial meters, sensor-based instrumentation, compact control panels, and low-power embedded equipment. In a metering design, the MCU can combine sensor conditioning, timing, local display control, and communication tasks. In a motor-control design, its timers and analog interfaces can support deterministic control loops while keeping the external circuitry compact.
Designers should verify peripheral assignments, pin multiplexing, voltage-dependent operating limits, and package details against the pin-description table in the RL78/G14 datasheet before layout release. PCB power and decoupling design must account for the 1.6 V to 5.5 V operating range, while firmware should use the documented low-power modes when standby consumption is important. Because this specific order code is identified as obsolete, replacement sourcing should verify lifecycle status and firmware compatibility before a redesign is committed.
חלופות תחליף ישיר עבור R5F104LGAFB#30 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
R5F104LGAFB#V0
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F104LJAFB#30
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F104LJAFB
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F104LEAFB#30
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F104LFAFB#30
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F104LGAFB#30 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 16-bit general-purpose microcontroller |
| Series | RL78/G14 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Operating Supply Voltage Range | 1.6 V to 5.5 V |
| מארז | 64-LFQFP, 10 x 10 mm |
| מספר פינים | 64 pins |
| סוג הרכבה | Surface mount |
| טווח טמפרטורת פעולה | -40°C to +85°C |
| CPU Performance | 44 DMIPS at 32 MHz |
| Family Low-Power Performance | 66 µA/MHz |
| RTC and LVD Low-Power Performance | 0.60 µA |
| Application Area | Motor control, industrial, and metering |
| Architecture | 16-bit RL78 |
מדריך תצורת פינים של R5F104LGAFB#30 64-lfqfp, 10 x 10 mm
תצורת פינים עבור R5F104LGAFB#30 (מארזת 64-lfqfp, 10 x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור R5F104LGAFB#30.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
R5F104LGAFB#30 מתאים עבור 6 יישוםs: Electric Motor Control, Industrial Metering, Industrial Sensor Interface, Low-Power Embedded Equipment, Industrial Communication Gateway, Compact Control Panel.
Electric Motor Control
The R5F104LGAFB#30 suits compact motor-control systems because its 32 MHz RL78/G14 core can execute deterministic control routines while its integrated timers support pulse-width modulation and input capture. The 64-LFQFP package exposes 64 pins for motor-driver control, position sensing, fault handling, and communications. At a 1.6 V to 5.5 V operating range, the MCU can support low-voltage systems, although the selected motor driver and sensor voltage levels must match. Validate timer channels, ADC inputs, fault pins, and pin multiplexing against the package-specific pin table before layout release.
מומלץ
Industrial Metering
The R5F104LGAFB#30 can act as the central controller in an industrial metering product, coordinating sensor measurements, timing, local indication, and data transfer. Its 128 KB flash provides embedded application code, while the 32 MHz processor supports responsive measurement handling. The 1.6 V minimum operating voltage is useful for low-energy meter platforms, and the 64-LFQFP package provides sufficient connections for sensors, displays, and communication lines. Confirm the required ADC inputs, timer channels, serial interfaces, and display-driver pins before selecting the package and finalizing the schematic.
מומלץ
Industrial Sensor Interface
The R5F104LGAFB#30 is appropriate for a multi-sensor industrial interface because its integrated RL78/G14 peripherals can reduce the need for separate logic devices. The 128 KB flash supports configuration tables, calibration data, diagnostics, and communication routines, while the 32 MHz clock supports timely sampling and filtering. With 64 pins in a 10 x 10 mm LFQFP, the device can connect several sensors and external transceivers without a large package. Engineers should verify the ADC channel count, comparator availability, input-voltage limits, and alternate-function assignments for the exact suffix.
מומלץ
Low-Power Embedded Equipment
The R5F104LGAFB#30 fits low-power embedded equipment because the RL78/G14 family provides 66 µA/MHz low-power performance and can reduce to 0.60 µA when operating with only the RTC and LVD. Its 128 KB flash is sufficient for compact control, logging, and power-management firmware, while the 1.6 V to 5.5 V range supports energy-conscious supply designs. Duty-cycle the MCU carefully and use the documented low-power modes. Actual battery life depends on the external sensor load, regulator efficiency, wake-up sources, and firmware behavior.
מומלץ
Industrial Communication Gateway
The R5F104LGAFB#30 can serve as a protocol gateway or local data concentrator when a system requires deterministic embedded processing near sensors or actuators. Its 32 MHz core and 128 KB flash accommodate protocol conversion, status reporting, buffering, and configuration storage. The 64-LFQFP footprint offers a practical balance between pin access and board area. Select the required serial channel, compare its electrical interface characteristics with the external transceiver, and provide suitable termination and isolation where needed. Firmware and peripheral assignments should be validated before replacing an established gateway controller.
מומלץ
Compact Control Panel
The R5F104LGAFB#30 can manage a compact industrial control panel with buttons, indicators, sensors, and a serial display or communications link. The 128 KB flash provides room for interface state machines, diagnostics, and product configuration, while the 16-bit RL78 architecture handles responsive control tasks. Its 64-LFQFP package makes external connection straightforward without using a very large fine-pitch footprint. Check the package pin assignments for debounced inputs, display control, and communications, and confirm that the 1.6 V to 5.5 V range covers the intended system rails.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור R5F104LGAFB#30 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | R5F104LGAFB#V0 | R5F104LJAFB#30 | R5F104LJAFB | R5F104LEAFB#30 | R5F104LFAFB#30 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 64-LFQFP (10x10) | 64-LFQFP (10x10) | 64-LFQFP (10x10) | 64-LFQFP (10x10) | 64-LFQFP (10x10) | 64-LFQFP (10x10) |
| Series | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Supply Voltage | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V |
מבדילים עיקריים
- Exact 128 KB flash configuration (לעומתR5F104LJAFB#30)
- Closest ordering-code migration path (לעומתR5F104LGAFB#V0)
- Documented industrial temperature fit (לעומתR5F104LGAFB#V0)
- Same platform with additional firmware headroom (לעומתR5F104LEAFB#30)
הערות תכנון
Assign every signal from the RL78/G14 package pin table before routing the PCB. The R5F104LGAFB#30 uses a 64-LFQFP footprint with 64 pins, and several alternate functions can share the same pad. Mark power, ground, analog, debug, and reset nets separately in the schematic and verify them against the datasheet package drawing. A footprint match alone does not establish electrical compatibility when an alternative changes pin multiplexing.
Design the supply network for the documented 1.6 V to 5.5 V operating range. Place the MCU's required bypass capacitors at the associated supply pins, maintain short return paths, and avoid routing sensitive analog inputs beside switching-node or high-current motor-drive traces. If the same board includes a motor driver, separate noisy power conversion from the MCU supply and validate startup behavior when the motor rail is enabled.
Do not assume that any same-package RL78/G14 order code is an automatic substitution. Compare flash capacity, peripheral availability, pin multiplexing, electrical characteristics, temperature grade, startup behavior, and qualification. In particular, R5F104LJAFB#30 has 256 KB flash compared with 128 KB for the target. Although the extra memory can ease firmware expansion, changed peripheral mappings or startup behavior can still require schematic and software changes.
Keep the 32 MHz clock path and sensitive analog sections away from motor-drive outputs and fast-switching nets. Use a continuous ground reference beneath the MCU and sensitive components, minimize loop area for power and signal returns, and follow the datasheet guidance for decoupling and unused pins. For a replacement, compare the original and candidate pin descriptions line by line and highlight any pins that change function before releasing PCB artwork.
מידע על תאימות
Compliance attributes require confirmation from the manufacturer product documentation or a current material declaration for this ordering code.