R5F211A2DD#U0 - 16-Bit 20MHz R8C MCU | Renesas
MPN: R5F211A2DD#U0 ✓ פעילR5F211A2DD#U0 סקירה
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one compact component. The R8C belongs to the microcontroller hierarchy, where its R8C CPU core provides the instruction-processing foundation for embedded control systems. Unlike a general-purpose desktop processor, the R5F211A2DD#U0 is designed to execute a defined firmware task while handling digital inputs, outputs, timers, communications, and other embedded-system functions.
The verified product information identifies a 16-bit architecture, 20 MHz maximum clock, 8 KB flash organized as 8K x 8, and a 20-SDIP package. These characteristics make the part relevant to compact industrial controllers, appliance controls, instrumentation, sensor-conditioning systems, and legacy embedded products. The through-hole SDIP package also supports prototype boards, repair workflows, and designs assembled with conventional DIP sockets or manual soldering.
The R5F211A2DD#U0 belongs to Renesas's R8C/1A product grouping. Its architecture and package should be selected based on the complete manufacturer datasheet rather than only headline frequency and memory figures. Peripheral availability, operating voltage limits, timer resources, serial interfaces, electrical characteristics, and pin multiplexing must be checked against the requirements of the target product before design release.
Typical applications include compact motor-sequence controllers, temperature-monitoring instruments, digital panel controls, and embedded industrial modules. In each case, firmware converts the MCU's inputs and communications into control actions while its flash stores the operating program. The 20 MHz R8C core provides useful processing headroom for interrupt-driven control, although final performance depends on the selected peripheral configuration and code path.
A primary design consideration is PCB footprint and pin assignment. The verified listing specifies a 20-pin SDIP configuration, so designers should use the manufacturer's pin-assignment drawing and preserve the 0.1-inch pitch arrangement. Decoupling, programming access, oscillator implementation, unused-pin treatment, and reset requirements must follow the relevant Renesas hardware guidance for the selected package and operating conditions.
This page consolidates the verified manufacturer and distributor information with practical sourcing, comparison, and design guidance. It distinguishes confirmed parameters from values that require consultation of the full datasheet, helping engineers evaluate the R5F211A2DD#U0 without relying on an incomplete distributor summary.
חלופות תחליף ישיר עבור R5F211A2DD#U0 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
R5F211A1DD#U0
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F211A3DD#U0
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F211B1DD#U0
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←R5F211A2DD#U0 דירוגים מרביים ומאפיינים חשמליים
| Device Type | 16-bit single-chip microcontroller |
| CPU Core | Renesas R8C core |
| Product Family | R8C/1A |
| תדר שעון מקסימלי | 20 MHz |
| Word Length | 16 bit |
| Flash Memory | 8 KB |
| Flash Organization | 8K x 8 |
| מארז | 20-pin SDIP |
| סוג הרכבה | Through-hole |
| מספר פינים | 20 pins |
מדריך תצורת פינים של R5F211A2DD#U0 20-pin sdip
תצורת פינים עבור R5F211A2DD#U0 (מארזת 20-pin sdip). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור R5F211A2DD#U0.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
R5F211A2DD#U0 מתאים עבור 6 יישוםs: Compact Industrial Control Module, Temperature Monitoring Instrument, Appliance Control Board, Sensor Interface and Data Logger, Digital Panel Controller, Legacy Motor Sequencing Controller.
Compact Industrial Control Module
The R5F211A2DD#U0 is appropriate for a compact embedded controller whose firmware performs sequencing, input monitoring, and actuator control. Its 16-bit R8C core operates at up to 20 MHz, while 8 KB of flash provides a defined code and constant-data budget. The 20-pin SDIP package also simplifies prototype assembly and repair. Engineers should allocate the confirmed 8 KB to application code, bootloader requirements, interrupt routines, and configuration data rather than assuming the entire memory is available for application logic.
מומלץ
Temperature Monitoring Instrument
A temperature-monitoring instrument can use the R5F211A2DD#U0 to acquire sensor data, apply calibration, display a measurement, and manage alarm thresholds. The 20 MHz R8C core supports interrupt-driven sampling and control logic, while the 8 KB flash is appropriate for a focused, single-purpose instrument. The 20-pin SDIP package supports straightforward prototyping. Final accuracy depends on the selected sensor interface, reference components, averaging strategy, and firmware rather than on MCU clock frequency alone.
מומלץ
Appliance Control Board
The R5F211A2DD#U0 suits legacy appliance controls that combine push-button inputs, display functions, timing, and motor or heater sequencing. Its 16-bit architecture and 20 MHz operating frequency provide a compact control platform, and 8 KB of flash accommodates a focused appliance program. The SDIP package is useful where existing through-hole assembly methods are retained. Designers must verify available timers, outputs, interrupt sources, and operating-voltage limits in the manufacturer datasheet before selecting it for a new production board.
מומלץ
Sensor Interface and Data Logger
For a compact sensor logger, the R5F211A2DD#U0 can coordinate sensor readings, timestamps, status flags, and stored events through its R8C firmware. The 8 KB flash provides room for a limited program and configuration area, so engineers should define the logging format and retention strategy carefully. At 20 MHz, the processor can service deterministic control tasks, but achievable sample rate depends on the sensor interface and interrupt design. The 20-pin SDIP format makes the controller practical for legacy data-acquisition equipment.
מומלץ
Digital Panel Controller
The R5F211A2DD#U0 can serve as the controller in a compact digital panel with buttons, indicators, and a serial host interface. Its 16-bit R8C core handles event processing and state-machine logic at up to 20 MHz, while the 8 KB flash supports panel-specific firmware. The 20-pin SDIP package permits easy prototype replacement and hand soldering. Before implementation, verify whether the required display, keypad, and communications functions map directly to the available pins or require additional interface components.
מומלץ
Legacy Motor Sequencing Controller
The R5F211A2DD#U0 can implement a small motor-sequencing or step-control module where deterministic timing and limited I/O are required. Its 20 MHz R8C core is suitable for coordinating commands, managing state transitions, and generating timed outputs, subject to the datasheet's timer resources. The 20-pin SDIP package is advantageous for repairing older equipment. Production designs must include suitable drive circuitry, protection, and fault handling; the MCU itself is the controller and does not replace power-stage components.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור R5F211A2DD#U0 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | R5F211A1DD#U0 | R5F211A3DD#U0 | R5F211B1DD#U0 |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-pin SDIP | 20-pin SDIP | 20-pin SDIP | 20-pin SDIP |
| CPU Architecture | 16-bit R8C core | 16-bit R8C core | 16-bit R8C core | 16-bit R8C core |
| Product Family | R8C/1A | R8C/1A | R8C/1A | R8C/1B |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | Approximately 4 KB | Approximately 16 KB | Approximately 16 KB |
מבדילים עיקריים
- Verified 8 KB flash configuration (לעומתR5F211A1DD#U0)
- Verified R8C/1A family position (לעומתR5F211B1DD#U0)
- Verified 20 MHz and 16-bit architecture (לעומתR5F211A1DD#U0)
הערות תכנון
מידע על תאימות
The verified results did not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this exact ordering code. AEC-Q100 is not applicable because this is a general-purpose microcontroller rather than an automotive-qualified device identified by the provided data.
