SI3208-B-GM - 2-Channel 3.3V SLIC Codec | Silicon Labs
MPN: SI3208-B-GM ✓ פעילSI3208-B-GM סקירה
A Subscriber Line Interface Concept is a mixed-signal telecom interface that connects a voice codec to an analog subscriber line. Within the telecom interface hierarchy, a SLIC sits between the PCM or GCI digital channel and the line-facing analog network. Its principal role is to perform line-state control, DC feed, ring generation, line supervision, codec functions, and balancing for one or two subscriber channels.
The SI3208-B-GM supports two SLIC channels in a 3.3 V system and provides software-programmable operating parameters. Its listed functions include balanced or unbalanced ringing, loop or ground-start operation, smooth polarity reversal, and low-power sleep mode. These features allow a telecom system to consolidate line-interface functions while controlling power consumption and adapting behavior to different network requirements.
The device exposes GCI, PCM, and SPI control paths, giving a host processor multiple ways to configure and supervise the line interfaces. Its integrated signal-path and line-control functions reduce the amount of external circuitry required around the codec. This integration is particularly useful in compact access equipment, voice gateways, line cards, and other multi-channel subscriber-line products.
Typical applications include two-channel voice-over-IP terminals, central-office line interfaces, DSL and broadband line-card functions, PSTN-compatible gateways, and equipment implementing loop-start or ground-start signaling. The SI3208-B-GM is appropriate when the system needs one device to service two analog subscriber lines while presenting the host with a digital telecom interface.
PCB implementation should account for the 40-pin QFN footprint, exposed thermal pad, high-voltage line-side isolation requirements, and the separation between line-side and logic-side circuitry. Follow the pin-description and layout guidance in the Silicon Labs SI3208 datasheet when assigning nets and planning isolation, filtering, and grounding. The exact operating-temperature limits and absolute maximum ratings must be taken from that datasheet before production release.
This page organizes the SI3208-B-GM core electrical characteristics, interface functions, package details, application guidance, and identified family comparisons. It also distinguishes confirmed drop-in options from components that require pinout, electrical, and line-interface verification before they can be used as replacements.
חלופות תחליף ישיר עבור SI3208-B-GM — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם SI3208-B-GM (אותו גורם צורה וטביעת רגל) — שונים ב Lead-Free Status, Product Type.
SI3208-B-FMR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
SI3209-B-FM
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←SI3208-B-GM מפרטים
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC IC |
| Number of Channels | 2 channels |
| מתח אספקה | 3.3 V |
| Digital Interfaces | GCI, PCM, and SPI |
| Line Functions | BORSCHT functions |
| Ringing Support | Internal balanced or unbalanced ringing |
| Line Start Mode | Loop or ground-start operation |
| Programmability | Software-programmable parameters |
| Power Management | Low-power sleep mode |
| Polarity Control | Smooth polarity reversal |
| Line Voltage | 125 V |
| Channel Gain | 60 dB |
| מארז | 40-pin QFN, 6 x 6 mm |
| Package Type | QFN with exposed pad |
| סוג הרכבה | Surface mount |
| Lead-Free Status | Lead free |
מדריך תצורת פינים של SI3208-B-GM qfn with exposed pad
תצורת פינים עבור SI3208-B-GM (מארזת qfn with exposed pad). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור SI3208-B-GM.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
SI3208-B-GM מתאים עבור 6 יישוםs: Two-Channel Voice Gateway, Central-Office Line Card, VoIP Terminal Interface, PSTN Compatibility Gateway, DSL Line Card, Industrial Telephone Interface.
Two-Channel Voice Gateway
The SI3208-B-GM fits a voice gateway requiring two analog subscriber-line interfaces alongside one digital transport controller. Its two-channel architecture consolidates line-side functions in one 40-pin QFN device, while GCI, PCM, and SPI connectivity supports host configuration and supervision. The 3.3 V supply simplifies integration with modern digital subsystems, and software-programmable parameters allow channel behavior to be adapted to different line conditions. Its balanced or unbalanced ringing capability also supports flexible external line networks.
מומלץ
Central-Office Line Card
A central-office line card can use the SI3208-B-GM where two subscriber channels are required per IC. The device combines Subscriber Line Interface and codec functions in one package, reducing the number of discrete line-interface components required for short- or long-loop service. Its BORSCHT support covers the principal line-state functions, while loop or ground-start operation supports different central-office signaling conventions. The exposed-pad QFN construction requires careful thermal and return-path layout.
מומלץ
VoIP Terminal Interface
The SI3208-B-GM is suitable for a two-port analog VoIP terminal that must bridge digital voice transport and subscriber-line circuitry. PCM or GCI connectivity allows the device to integrate with a voice-processing system, while SPI provides a configuration route for programmable line parameters. Support for balanced or unbalanced ringing, smooth polarity reversal, and loop or ground-start operation accommodates different analog endpoints. Low-power sleep mode is useful when the terminal must reduce consumption during inactive periods.
מומלץ
PSTN Compatibility Gateway
The SI3208-B-GM can support a PSTN compatibility gateway that converts between digital voice channels and two analog subscriber lines. Its integrated BORSCHT functions reduce the external line-interface burden, and the 60 dB channel figure supports the voice-path design target. Internal ringing generation supports both balanced and unbalanced networks, while loop or ground-start operation allows adaptation to the serving exchange. The 3.3 V operation also aligns with a modern gateway power architecture.
מומלץ
DSL Line Card
The SI3208-B-GM is applicable to access equipment combining DSL transport with subscriber voice services. Placing two Subscriber Line Interface channels beside a broadband access controller allows shared communication and power infrastructure. The device's GCI, PCM, and SPI interfaces provide flexible pathways to the system controller, while software-programmable parameters simplify adaptation across line deployments. Designers must preserve line-side isolation and separation between the 125 V subscriber-line environment and the 3.3 V logic domain.
מומלץ
Industrial Telephone Interface
An industrial telephone or private-exchange interface can use the SI3208-B-GM for two analog extensions sharing one line-device package. Loop or ground-start operation supports common telephone signaling arrangements, and smooth polarity reversal improves control of line polarity during call-state transitions. Software-programmable ringing and sleep behavior allow the equipment to adapt to different extension requirements. The surface-mount QFN package supports compact designs, although isolation, surge protection, ringing safety, and regulatory requirements remain essential layout constraints.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור SI3208-B-GM — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | SI3208-B-FMR | SI3209-B-FM |
|---|---|---|---|
| Package | 40-pin QFN (6 x 6 mm) with exposed pad | 40-pin QFN (6 x 6 mm) with exposed pad | 40-pin QFN (6 x 6 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Product Function | 2-channel SLIC and CODEC | SI3208-family SLIC and CODEC | SI3209-family SLIC |
מבדילים עיקריים
- Two subscriber-line channels in one package (לעומתSI3209-B-FM)
- Three digital host-interface options (לעומתSI3208-B-FMR)
- Flexible subscriber-line operating modes (לעומתSI3209-B-FM)
הערות תכנון
Separate the subscriber-line domain from the 3.3 V logic domain with the isolation and protection components specified by the SI3208 reference design. Keep ringing and line-current paths away from SPI, PCM, and GCI traces, and preserve the manufacturer's recommended creepage and clearance boundaries. Treat the 125 V line rating as a system requirement rather than a substitute for component-level isolation validation.
The 40-pin QFN uses an exposed pad for heat transfer, so connect it to the recommended ground-plane structure and minimize thermal resistance into the PCB. Estimate junction temperature from worst-case supply dissipation, ambient temperature, and the package thermal model before release. Verify the exposed-pad geometry and land pattern against the official package drawing rather than relying on a generic 40-QFN footprint.
Place the input, output, and line-interface bypass components directly beside their designated pins and keep the digital-interface return path continuous beneath the device. Use a thermal-via pattern under the exposed pad only where the manufacturer layout permits it. Confirm the final pin numbering, exposed-pad connection, and component sequence in the Silicon Labs SI3208 datasheet before fabrication.
Do not assume that the SI3208, SI3209, or a reel-order-code variant is automatically interchangeable. Check channel count, line voltage, package dimensions, pin names, exposed-pad connection, digital interfaces, loop-start versus ground-start support, and programmable-register compatibility. Also confirm that tray and tape-and-reel order codes have the same die and revision before approving a substitution.
מידע על תאימות
The product listing identifies SI3208-B-GM as lead free. No explicit RoHS, REACH, halogen-free, or conflict-minerals statement was identified for the exact order code.