SN74LS629D - Dual 20MHz VCO IC | Texas Instruments
MPN: SN74LS629D ✓ פעילSN74LS629D סקירה
A voltage-controlled oscillator is a clock-generation device whose output frequency is adjusted by an external control voltage. In the broader semiconductor hierarchy, a VCO belongs to the clock and timing IC family, alongside programmable timers and fixed-function oscillator circuits. By translating a varying voltage into a changing clock frequency, this type of IC supports frequency modulation, tone generation, sweep generation, phase measurement, and closed-loop frequency-control systems.
The SN74LS629D is identified as a dual VCO with a 20 MHz upper frequency. Two VCO sections in one package reduce component count and simplify board planning when both channels can share the same supply and ground architecture. The device is offered in the SN74LS629 series, whose ordering options include different package or delivery configurations. Its standard logic-family implementation is suited to conventional 5 V digital systems.
The SN74LS629 architecture separates frequency control from the oscillator output. External timing components determine each oscillator's operating characteristics, while the control voltage changes the instantaneous output frequency. Designers must account for component tolerances, control-voltage range, maximum operating frequency, output loading, and supply decoupling when calculating tuning range and frequency accuracy. The manufacturer's pin-description table and recommended operating conditions should govern final component selection and circuit values.
Typical applications include dual-channel swept-signal sources, audio tone generators, modulation circuits, instrumentation test signals, frequency-discriminator demonstrations, and laboratory timing systems. Two oscillators can also generate a reference and a controlled test signal, or provide two phase-related waveforms for clock-data or feedback experiments. Where a fixed or digitally programmable clock is sufficient, a conventional oscillator or timer may be simpler; the SN74LS629D is most appropriate when continuous voltage-based frequency adjustment is valuable.
For robust PCB implementation, place each oscillator's frequency-setting components close to the associated IC pins and keep control-voltage traces away from high-current switching nodes. Provide a low-impedance ground plane, decouple the supply near the device, and validate the control-voltage range with the external network. Confirm output rise and fall times at the intended load because frequency behavior and usable bandwidth can depend on the surrounding circuit.
This product page combines the Texas Instruments device identity, dual-VCO function, 20 MHz frequency capability, 16-SOIC packaging, sourcing information, comparison points, and practical implementation guidance. It is intended to help engineers identify the correct logic-family oscillator and plan a layout that preserves tuning accuracy, timing stability, and signal integrity.
חלופות תחליף ישיר עבור SN74LS629D — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותSN74LS629D מפרטים
| Device Type | Dual voltage-controlled oscillator |
| Oscillator Count | 2 channels |
| Maximum Frequency | 20 MHz |
| מתח אספקה | 5 V |
| Control Interface | Voltage-controlled |
| Logic Family | 74LS |
| מארז | 16-SOIC |
| מספר פינים | 16 pins |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של SN74LS629D 16-soic
תצורת פינים עבור SN74LS629D (מארזת 16-soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור SN74LS629D.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
SN74LS629D מתאים עבור 6 יישוםs: Dual-Channel Swept-Signal Generator, Audio Tone and Modulation Source, Frequency-Discriminator Test Circuit, Phase and Timing Comparison Instrumentation, Industrial Process-Control Signal Generator, Frequency-Control Feedback Demonstrator.
Dual-Channel Swept-Signal Generator
The SN74LS629D fits a swept-signal generator because its two voltage-controlled oscillator channels can follow two independently varying control voltages while operating up to 20 MHz. One channel can provide the swept reference and the other a related comparison tone, or both can contribute to a dual-axis test pattern. The 16-SOIC package also allows both channels to share a compact board area. Accurate sweep linearity depends on the external timing components and control-voltage network, so engineers should characterize the complete assembly across its intended frequency and voltage ranges. The dual architecture is particularly valuable when the design must preserve timing relationships between two adjustable outputs.
מומלץ
Audio Tone and Modulation Source
The SN74LS629D can serve as an adjustable tone source because changing each oscillator's control voltage changes its output frequency. Two channels permit generation of a carrier and a separate modulation or comparison signal, which is useful in audio testing and demonstrations. Texas Instruments specifies the SN74LS629 as a dual VCO with operation up to 20 MHz, providing ample frequency range for many bench-tone and modulation experiments. The external RC network must be selected for the intended audible or ultrasonic range, and output waveform quality should be verified at the required load rather than assumed from the maximum frequency rating.
מומלץ
Frequency-Discriminator Test Circuit
The SN74LS629D is useful in a frequency-discriminator test circuit because its output frequency can be swept by a control voltage while the discriminator converts frequency into a measurable voltage. The two oscillator channels can generate the test signal and an independent reference, allowing phase and error comparisons under controlled conditions. With a maximum operating frequency of 20 MHz, the device supports laboratory and instrumentation experiments across a broad range. Calibration should include the external timing components, control-voltage linearity, supply variation, and the discriminator's own frequency response. Keeping the VCO timing network compact helps reduce parasitic effects during high-frequency measurements.
מומלץ
Phase and Timing Comparison Instrumentation
The SN74LS629D supports phase-comparison instrumentation by providing two voltage-controlled oscillator channels in one 16-SOIC package. One output can act as a reference while the second is tuned to establish a deliberate frequency or phase offset for evaluating time-interval and feedback systems. Because both channels operate from the same device, their common supply and package placement can simplify multi-channel bench prototypes. Engineers should still evaluate channel-to-channel matching, control-voltage sensitivity, and output loading. Stable component selection and short timing paths are important when converting a small frequency difference into a meaningful phase relationship.
מומלץ
Industrial Process-Control Signal Generator
The SN74LS629D can generate a controllable test signal for industrial process-control and system-identification experiments where the excitation frequency must be adjusted during a test. Two channels can provide a process stimulus and a reference or monitoring signal, reducing the component count compared with separate oscillator packages. The device's voltage-control interface permits adjustment without changing discrete frequency-setting components. Operation up to 20 MHz gives broad flexibility, while the 5 V implementation suits conventional logic-level test equipment. In deployed systems, engineers should compensate for temperature drift, control-voltage accuracy, and component tolerance, and verify that the generated signal remains within the bandwidth of downstream plant or test circuitry.
מומלץ
Frequency-Control Feedback Demonstrator
The SN74LS629D is well suited to a closed-loop frequency-control demonstrator because the control voltage can continuously adjust oscillator frequency while a feedback circuit corrects the resulting error. A second VCO channel can provide a reference, auxiliary excitation, or comparison signal within the same 16-SOIC footprint. This arrangement makes the part useful for teaching, prototyping, and laboratory evaluation of PLL-like and automatic-frequency-control concepts without requiring two separate oscillator packages. Practical implementation requires careful grounding, low-noise supply decoupling, and verification of the control-voltage input range. Stable external timing components are also necessary to keep loop behavior predictable across environmental changes.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור SN74LS629D — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | SN74LS629DR | SN74LS629NSRE4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Device Function | Dual voltage-controlled oscillator | Dual voltage-controlled oscillator | Dual voltage-controlled oscillator |
| Oscillator Count | 2 channels | 2 channels | 2 channels |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz |
| Supply Voltage | 5 V | 5 V | 5 V |
| Logic Family | 74LS | 74LS | 74LS |
| Control Method | Voltage control | Voltage control | Voltage control |
| Special Ordering Feature | Standard D ordering code | Tape-and-reel delivery code | Additional order-code designation |
מבדילים עיקריים
- Two adjustable oscillator channels in one package (לעומתSN74LS629DR)
- Continuous voltage-based frequency adjustment (לעומתSN74LS629NSRE4)
- Compact dual timing-channel integration (לעומתSN74LS629DR)
הערות תכנון
Place the frequency-setting components and any control-voltage input components directly beside their associated SN74LS629D pins. Keep oscillator loops compact to reduce parasitic capacitance and inductance, which can alter tuning range and phase noise. Follow the manufacturer datasheet's pin-description and layout guidance, provide a continuous ground plane, and route high-current switching paths away from the oscillator timing nodes.
Decouple the 5 V supply locally at the SN74LS629D and use the capacitor arrangement and connection shown in the manufacturer application guidance. A low-impedance ground return is especially important because two oscillator channels share the package and supply. Validate the supply voltage at the device under minimum-load and maximum-load conditions so that power-source variation does not distort the control-voltage-to-frequency relationship.
Check oscillator output rise and fall times, duty-cycle behavior, and output loading in the completed circuit. Use a short output route to the first receiver and avoid long unprotected branches. If the control voltage originates from an analog node, protect that trace from switching-node interference and verify that noise on the control line does not create unintended frequency jitter.
Do not interpret the 20 MHz maximum as a guaranteed operating point without confirming the external timing network and control-voltage range. Component tolerance, temperature, supply variation, and loading all influence actual frequency. Use the Texas Instruments SN74LS629 datasheet for recommended operating conditions and timing values, and characterize the assembled circuit across its intended environmental range before production use.
מידע על תאימות
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Texas Instruments product documentation or applicable manufacturer declarations.