SN74LS92D - Divide-by-12 4-Bit Counter | Texas Instruments
MPN: SN74LS92D ✓ פעילSN74LS92D סקירה
A counter IC is a synchronous sequential-logic device that advances an internal binary state when it receives an active clock transition. The SN74LS92 belongs to the broader 74LS TTL family, which combines digital counting functions with standard bipolar logic interfaces. Divide-by-12 operation is useful when a system needs a repetitive 12-state sequence rather than a binary modulus of 2, 8, or 16. The output state can therefore be decoded for clock-enable generation, event counting, phase selection, or repetitive control sequencing.
The verified data specifically identifies a 4-bit counter, one element, positive-edge triggering, and a divide-by-12 function. The 14-pin SOIC package is the confirmed physical format for the SN74LS92D ordering code. Other operating details, including supply voltage limits, propagation delay, output drive capability, current consumption, and temperature limits, were not included in the supplied verified records and must be confirmed against the manufacturer datasheet before design release.
Typical uses include industrial timing modules, digital clock dividers, pulse and event counters, sequencing controllers, and educational digital-logic systems. The positive-edge trigger means the counter changes state on the designated clock transition rather than every clock level. Designers should preserve the counter’s reset behavior and unused input states according to the manufacturer datasheet, and should not substitute a generic counter unless its count modulus, pinout, voltage interface, and timing characteristics are verified as compatible.
The primary design consideration is package and logic-family compatibility. SN74LS92D uses a 14-pin SOIC footprint, so a proposed replacement must match that footprint and confirm every terminal function. Supply-voltage compatibility, output timing, fan-out, and signal-integrity margin are especially important when the counter interfaces with slower TTL, faster CMOS, microcontroller, or optocoupler-based systems.
This page consolidates verified distributor information, official Texas Instruments product identification, package data, application context, and replacement-screening guidance. The available records do not provide a verified unit price, complete electrical limit table, or five distinct drop-in alternatives; those fields are intentionally marked for verification rather than inferred.
חלופות תחליף ישיר עבור SN74LS92D — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם SN74LS92D (אותו גורם צורה וטביעת רגל) — שונים ב Counter Type, Counting Direction, Logic Family, Mounting Type, Package.
SN74LS92DE4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
SN74LS92D
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←SN74LS92D דירוגים מרביים ומאפיינים חשמליים
| Counter Type | Divide-by-12 counter |
| Logic Family | 74LS |
| Number of Counter Elements | 1 element |
| Counter Width | 4 bit |
| Counting Direction | Up counter |
| Clock Edge | Positive edge |
| מארז | 14-SOIC |
| Package Pin Count | 14 pins |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של SN74LS92D 14 pins
תצורת פינים עבור SN74LS92D (מארזת 14 pins). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור SN74LS92D.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
SN74LS92D מתאים עבור 7 יישוםs: Digital Clock Division, Event and Pulse Counting, Repetitive Sequencing Control, Industrial Timing Modules, Educational Digital Logic, Clocked Control Interfaces, Digital Logic Prototyping.
Digital Clock Division
The SN74LS92D is a suitable candidate for a digital clock-divider subsystem because the verified device is a 4-bit, positive-edge, divide-by-12 counter. Feeding a clean clock into its clock input can produce a recurring modulo-12 state sequence, allowing one output event to represent twelve input events after the required decoding logic is applied. This is useful when a controller needs a slower auxiliary timing reference rather than a simple binary divider. The designer should confirm the exact output truth table, reset state, supply limits, and timing margins in the Texas Instruments datasheet before treating the counter output as a guaranteed clock-enable.
מומלץ
Event and Pulse Counting
The SN74LS92D can count positive-edge events and organize them into groups of 12 when a system needs repeatable batch counting. The verified DigiKey listing confirms a 4-bit, one-element, positive-edge counter with divide-by-12 behavior, which suits pulse trains from sensors, limit switches, or machine-event sources. Connect the source through a suitable standard-compliant conditioning stage, then decode the counter outputs to generate a batch-complete pulse. Edge rate, noise immunity, reset timing, and output loading must be checked against the manufacturer electrical specifications.
מומלץ
Repetitive Sequencing Control
The divide-by-12 state sequence makes SN74LS92D appropriate for a compact repetitive sequencer or phase controller. Four counter outputs can represent twelve decoded phases, allowing a controller to activate actuators, display states, or timing windows in a fixed order. The verified function is divide-by-12 rather than a generic binary counter, so the design should use the manufacturer-defined output sequence and reset behavior. Validate timing margins against the slowest external device and ensure the 14-SOIC footprint is compatible with the PCB assembly process.
מומלץ
Industrial Timing Modules
SN74LS92D can provide a deterministic timing reference for industrial modules that must perform an action after twelve input cycles. The positive-edge trigger helps maintain a defined count event, and the divide-by-12 function offers a convenient modulus for machine cycles, inspection windows, or periodic service intervals. Because the supplied records do not include environmental or timing limits, the part should be qualified against the module’s voltage, temperature, noise, and isolation requirements. Add reset synchronization and appropriate input conditioning for noisy industrial wiring.
מומלץ
Educational Digital Logic
The SN74LS92D is well suited to laboratory and educational demonstrations because it exposes a clear divide-by-12 counting function in a standard 14-SOIC package. Students can observe the four counter outputs on a logic analyzer or oscilloscope and decode the sequence into 12 distinct states. The verified distributor records support the counter classification, while the package allows straightforward breadboard or perfboard prototyping. A complete lesson should include clock debouncing, reset sequencing, decoupling, and a comparison between the measured sequence and the manufacturer truth table.
מומלץ
Clocked Control Interfaces
The SN74LS92D can serve as the timing element in a clocked control interface where twelve input pulses correspond to one decoded control event. This arrangement can simplify a repeated-operation counter in test equipment, panel controls, or low-speed automation. The positive-edge definition makes the counter convenient for synchronous state updates, provided the external clock remains within the verified timing limits. Since the supplied data does not include propagation-delay or fan-out values, the designer must not assume compatibility with faster logic without checking the official datasheet.
מומלץ
Digital Logic Prototyping
The 14-SOIC SN74LS92D is useful for validating modulo-12 counter behavior before a larger control board is finalized. Its documented one-element, 4-bit, positive-edge structure provides a compact building block for testing count decoding, reset recovery, and output-state sequencing. Prototype boards should include a local decoupling capacitor, a defined clock source, and unused-input handling according to the datasheet. Because the verified material does not provide complete voltage, current, or temperature ratings, use it as a logic-level prototype only within manufacturer limits.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור SN74LS92D — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | SN74LS92DE4 | SN74LS92D |
|---|---|---|---|
| Function | Divide-by-12 counter | Divide-by-12 counter | Divide-by-12 counter |
| Counter Width | 4 bit | 4 bit | 4 bit |
| Clock Edge | Positive edge | Positive edge | Positive edge |
| Counter Elements | 1 element | 1 element | 1 element |
| Package | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
מבדילים עיקריים
- Purpose-specific divide-by-12 function (לעומתGeneric 4-bit binary counter)
- Positive-edge-triggered operation (לעומתSN74LS92N)
- Confirmed 14-SOIC package for the target ordering code (לעומתSN74LS92N)
הערות תכנון
Do not treat every 74LS counter as an equivalent: SN74LS92D must specifically provide a divide-by-12 count, positive-edge triggering, 4-bit outputs, and the same 14-SOIC terminal arrangement. The verified records do not provide the full pinout, so obtain the manufacturer datasheet and compare each terminal before layout or replacement approval.
Place the counter close to the clock and reset circuitry, and route the clock path away from noisy switching nodes. A short, continuous clock trace reduces susceptibility to false positive edges, while a deliberate reset return can prevent undefined startup states. Add the manufacturer-recommended bypass capacitor at the supply pins and preserve the package’s exposed copper requirements, if specified.
The verified records identify positive-edge counting but do not provide setup time, hold time, propagation delay, or output-drive values. Therefore, verify the clock source and load timing against the SN74LS92 datasheet rather than using a generic 74LS assumption. If the counter drives slower external logic, use an appropriate buffer and check fan-out, noise margin, and reset recovery timing.
Use a supply rail and decoupling arrangement compatible with the exact SN74LS92D grade and its verified electrical limits. The supplied data does not state current consumption, output levels, or operating voltage, so do not calculate a power budget from another family member. Confirm the voltage tolerance, input thresholds, and absolute maximum ratings in the official datasheet before power sequencing the circuit.
מידע על תאימות
Compliance status was not included in the supplied verified records. Verify RoHS, REACH, lead-free, halogen-free, and conflict-mineral statements from current Texas Instruments product or quality documentation.
