Texas Instruments

SN75155P - RS-232 Line Driver and Receiver | Texas Instruments

MPN: SN75155P ✓ פעיל
8-pin PDIP (P) Package
כמות הזמנה מינימלית: 1 |

SN75155P סקירה

The Texas Instruments SN75155P is a monolithic full-duplex RS-232 line driver and receiver packaged in an 8-pin PDIP (P) package. It supports the ANSI EIA/TIA-232-E interface between data terminal equipment and data communication equipment and operates across a 0°C to 70°C commercial temperature range. The device combines one driver, one receiver, and a response control input in a single package.

An RS-232 interface transceiver is a semiconductor device that converts logic-level signals into RS-232-compatible voltage levels and converts received RS-232 levels back into logic signals. In the interface hierarchy, the SN75155P belongs to the line-driver-and-receiver family, within transceivers, interface ICs, and integrated circuits. It is commonly placed between a host controller or UART and a DB-25 or equivalent RS-232 connector.

The key features of the SN75155P are its integrated driver and receiver, full RS-232 operation, response control for receiver-noise adjustment, and an 8-pin PDIP package. The response control input accepts a resistor, or a resistor and bias voltage, connected to ground to control receiver noise behavior. This makes the part useful in legacy data-communication equipment where one receiver serves a console, modem, or data-terminal connection.

Internally, the driver converts TTL/CMOS-level inputs into bipolar RS-232 signal levels, while the receiver converts a differential-looking RS-232 input into a logic-level output for the system controller. Because the driver and receiver operate in opposite directions, one SN75155P supports bidirectional communication when the driver output and receiver input are connected to separate interface signals. The manufacturer datasheet is the controlling reference for voltage thresholds, timing, and input-current limits.

Typical applications include serial console links, data-terminal equipment, legacy printer interfaces, industrial control panels, and RS-232 test equipment. The SN75155P is also appropriate where a controller requires a receive path with adjustable noise control rather than a modern multi-channel RS-232 transceiver.

When laying out an RS-232 design, place the transceiver close to the connector and keep the driver and receiver return paths routed away from sensitive analog inputs. Confirm the interface voltage thresholds, driver slew behavior, and response-control network against the manufacturer datasheet before releasing a production board.

This page consolidates the manufacturer product information, package and temperature data, interface standard, application context, and substitution guidance for engineers evaluating the SN75155P in legacy serial-interface designs.

חלופות תחליף ישיר עבור SN75155P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

SN75155P מפרטים

Device Type RS-232 line driver and receiver
Transceiver Configuration 1/1 full-duplex
Interface Standard ANSI EIA/TIA-232-E
Number of Drivers 1
Number of Receivers 1
Receiver Response Control Resistor or resistor and bias voltage connection to ground
טווח טמפרטורת פעולה 0°C to 70°C
מארז 8-pin PDIP (P)
מספר פינים 8
סוג הרכבה Through-hole

מדריך תצורת פינים של SN75155P 8-pin pdip (p)

תצורת פינים עבור SN75155P (מארזת 8-pin pdip (p)). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 8-pin pdip (p) עבור SN75155P

אין נתוני פריסת פינים מפורטים עבור SN75155P.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SN75155P מתאים עבור 6 יישוםs: Legacy Serial Console Interface, Data Terminal Equipment Interface, RS-232 Printer Interface, Industrial Control Panel Communication, RS-232 Test and Measurement Equipment, Modem and Communication Equipment Interface.

🖥️

Legacy Serial Console Interface

The SN75155P fits a console connection where a host controller must communicate with a serial terminal through an RS-232 port. Its integrated driver and receiver provide one bidirectional signal path in a single 8-pin PDIP package, reducing the component count compared with separate line-driver and receiver ICs. The 0°C to 70°C rating covers equipment enclosures without extended temperature requirements. Place the device near the connector, route its receiver path away from switching nodes, and follow the response-control arrangement in the manufacturer application circuit. Because the supply voltage and data-rate limits must be confirmed from the data sheet, validate them against the host UART before layout release.

🌐

Data Terminal Equipment Interface

The SN75155P is appropriate for data-terminal equipment that needs a dedicated RS-232 transmit and receive path compliant with the ANSI EIA/TIA-232-E interface referenced by the manufacturer. The monolithic implementation combines both directions in one package and includes a receiver response-control input for noise adjustment. Designers can use the control input with a resistor or with a resistor and bias voltage, depending on the receiver-noise strategy defined in the data sheet. Keep the circuit next to the serial connector and provide a stable logic-side supply. Confirm the input thresholds, output levels, and maximum data rate against the connected equipment before the PCB is released.

🏭

RS-232 Printer Interface

The SN75155P can serve as the interface between a controller and a legacy RS-232 printer when the printer uses a single driver and single receiver arrangement. One driver channel handles outgoing command data, while the receiver channel returns status information such as printer-ready or error indications. The 8-pin PDIP package is convenient for through-hole industrial equipment, and the specified 0°C to 70°C range suits normal indoor control cabinets. Position the IC near the DB-25 or equivalent connector, keep the return conductor short, and avoid routing the receiver trace alongside the transmit trace where cable coupling could create false status events.

🔧

Industrial Control Panel Communication

The SN75155P supports legacy control-panel links that exchange commands and diagnostics over RS-232. Its integrated driver, receiver, and response-control input provide a compact implementation for a single serial port, while the commercial 0°C to 70°C rating covers many indoor panels. Connect the receiver input to the protected inbound signal and the driver output to the outbound signal, following the interface diagram in the Texas Instruments data sheet. External surge protection should be placed at the connector boundary rather than relying solely on the IC. Validate the actual panel cable length and ground-reference arrangement because long unbalanced RS-232 cables can couple external noise into the receiver.

📊

RS-232 Test and Measurement Equipment

The SN75155P is useful in legacy test equipment that needs one isolated-by-cable RS-232 command channel and one status or measurement-data return channel. The transmitter and receiver share one package, allowing a compact instrument design without sacrificing separate directional signal paths. The response-control feature provides a way to tune receiver behavior in noisy laboratory environments, using the network recommended by the manufacturer data sheet. Place the transceiver near the external connector, use a low-impedance logic ground reference, and keep the receiver trace short. Verify the supported data rate and supply voltage before connecting it to an older instrument that may use different logic thresholds.

📡

Modem and Communication Equipment Interface

The SN75155P can provide the RS-232-facing driver and receiver in modem or communication equipment built around an older UART architecture. Its monolithic construction reduces the board area needed for one transmit and one receive path, and its operation targets the terminal-to-communication equipment interface described by ANSI EIA/TIA-232-E. The response-control input allows receiver-noise optimization when the modem cable leaves the enclosure. Route the driver output and receiver input independently to the connector, observe the external signal and return conductors, and follow the manufacturer application diagram. Confirm the transceiver’s supply voltage, logic levels, and data-rate capability against the host UART.

What is the SN75155P used for?
The SN75155P is a monolithic RS-232 line driver and receiver used to connect logic-level equipment to a serial data link. According to the Texas Instruments SN75155 data sheet, the device combines one driver and one receiver and is designed for data-terminal equipment and data-communication equipment interfaces defined by ANSI EIA/TIA-232-E. It is commonly placed between a UART and an RS-232 connector.
What package does the SN75155P use?
The SN75155P is supplied in an 8-pin PDIP (P) through-hole package. The Texas Instruments product page lists the SN75155P as an 8-pin line driver and receiver with an operating range of 0°C to 70°C. Confirm the PCB footprint against the manufacturer package drawing before placing the part, especially when comparing it with surface-mount RS-232 variants.
Where can I download the SN75155P datasheet PDF?
The official SN75155P datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn75155.pdf. The manufacturer data sheet is identified as Revision C and contains the electrical characteristics, pin descriptions, and application information. Use this document as the controlling reference for voltage thresholds, timing, and the response-control network.
Where can I find the SN75155P pinout?
The SN75155P pin assignment is published in the pin-configuration section of the Texas Instruments SN75155 data sheet. The part uses an 8-pin PDIP package and combines one driver, one receiver, and a response-control input. Before assigning PCB nets, use the pin-description table in the manufacturer data sheet rather than relying on a generic RS-232 transceiver diagram.
What is the response control input on the SN75155P?
The response control input allows the receiver’s noise behavior to be adjusted with external components. The Texas Instruments SN75155 data sheet states that a resistor, or a resistor together with a bias voltage, can be connected between the response control input and ground. The chosen network should be calculated from the receiver-noise requirements stated in the manufacturer data sheet.
Is the SN75155P a full-duplex RS-232 transceiver?
Yes, the SN75155P is listed as a 1/1 full-duplex transceiver containing one line driver and one line receiver. The driver and receiver operate in opposite directions, so the device supports a bidirectional RS-232 link when its driver output and receiver input connect to separate signal and return conductors. Application circuit details are shown in the Texas Instruments data sheet.
What RS-232 standard does the SN75155P conform to?
The SN75155P is designed for the ANSI EIA/TIA-232-E interface between data terminal equipment and data communication equipment. The Texas Instruments SN75155 data sheet explicitly identifies ANSI EIA/TIA-232-E as the governing interface standard. Compliance with that interface definition does not by itself establish compliance with every modern USB-to-serial or network protocol.
What is the operating temperature range of the SN75155P?
The SN75155P is specified for a 0°C to 70°C operating temperature range. This commercial range is listed on the Texas Instruments product page for the SN75155P part-details entry. If the enclosure requires operation below 0°C or above 70°C, select an appropriately qualified alternative rather than relying on this device outside its stated range.
Can SN75155PE4 replace the SN75155P?
The SN75155PE4 is a close functional member of the SN75155 family, but a replacement requires verification of the exact package, pin arrangement, temperature range, and electrical limits. The comparison material identifies SN75155PE4 as an 8-pin SOIC alternative, so it may not fit the SN75155P’s PDIP footprint. Treat it as a functional substitute requiring board-layout review, not an automatic drop-in replacement.
What is the best drop-in replacement for the SN75155P?
No drop-in replacement is confirmed because the verified cross-reference results identify related TI family members but do not establish a separate device with the same 8-pin PDIP footprint, pin mapping, and electrical ratings. The SN75155PE4 and SN75155PG4 are the closest catalog references, while the SN75155P remains the exact listed option. Request current availability through the Request a Quote form on this page.
When should I choose the SN75155P instead of a multi-channel RS-232 transceiver?
Choose the SN75155P when the design needs one dedicated driver and one receiver, a response-control input, and a legacy through-hole RS-232 interface. A multi-channel transceiver is preferable when several ports, automatic slew-rate control, or surface-mount assembly are required. The SN75155P’s single driver, single receiver, 8-pin PDIP package, and receiver response control define its strongest design niche.
Is the SN75155P suitable for industrial control equipment?
The SN75155P is suitable for legacy RS-232 links in equipment whose operating temperature remains within 0°C to 70°C. Its monolithic driver and receiver reduce the number of interface components in console, panel, and data-terminal designs. For installations exposed to wider temperature ranges or severe electrical noise, specify an RS-232 device with the corresponding environmental qualification.
How do I protect an SN75155P design from RS-232 surge events?
Protect the external connector and interface conductors rather than relying on the SN75155P alone for surge containment. The Texas Instruments application information should be used to understand the driver and receiver connections, while the board should add appropriately rated protection and a controlled ground reference. Verify the selected protection device against the actual cable length and installation environment.
How should I lay out an SN75155P RS-232 circuit?
Place the SN75155P near the RS-232 connector and route the driver output and receiver input away from sensitive analog and high-speed digital nets. Keep the connector-side return connection short and controlled, and follow the response-control component arrangement in the manufacturer application circuit. This layout reduces radiated coupling and helps the receiver reject noise picked up from external cables.
What can replace the SN75155P in a legacy serial design?
The SN75155PE4 and SN75155PG4 are the closest related entries in the SN75155 family, but the available comparison data does not prove that either is pin-to-pin interchangeable with the SN75155P in an 8-pin PDIP footprint. Before substituting, compare the package drawing, pin functions, supply voltage, receiver thresholds, and temperature range. The Request a Quote form can be used to request availability of the exact ordered MPN.
What are the key specifications of the SN75155P that engineers should know?
The SN75155P is a Texas Instruments monolithic RS-232 transceiver with one driver and one receiver in an 8-pin PDIP package. According to the manufacturer product page and data sheet, it targets ANSI EIA/TIA-232-E equipment interfaces, includes a response-control input, and is specified from 0°C to 70°C. Supply voltage, data rate, propagation delay, and driver levels require confirmation from the data sheet.
Where can I buy the SN75155P online?
Use the Request a Quote form on this page to request the SN75155P from XAIPART, including current stock, minimum order quantity, and lead time. The Texas Instruments product page identifies the SN75155P as an 8-pin line driver and receiver in a PDIP package. Commercial quotations should use the exact MPN SN75155P so the correct package and ordering code are evaluated.
What is the price of the SN75155P?
Current SN75155P pricing is available through the Request a Quote form on this page. The manufacturer datasheet, product page, and distributor listings establish the device identity and package, but the retrieved listings do not provide quantity-break prices suitable for static publication. Submit the required quantity and target package information to receive a current quotation.
What is the lead time for the SN75155P?
The current lead time for the SN75155P should be requested through the Request a Quote form on this page. Availability can vary with manufacturer inventory and order volume, so a dated commitment should be obtained before the part enters a production schedule. Specify the 8-pin PDIP package and the required quantity when submitting the request.
Is the SN75155P in stock?
Current SN75155P stock status is confirmed through the Request a Quote form on this page rather than through a static availability label. The Texas Instruments product page lists the part as a line driver and receiver, but live distributor inventory changes continuously. Include your required quantity, target date, and permissible packing method in the request for an accurate response.

נתוני עזר הנדסיים עבור SN75155P — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SN75155P for a legacy RS-232 link that needs one dedicated driver and one receiver, an 8-pin through-hole footprint, and a receiver response-control input. It is particularly suitable for console, printer, data-terminal, and single-port industrial-panel designs operating from 0°C to 70°C. Do not select a surface-mount SOIC family member merely because it carries a similar SN75155 name; verify the package drawing and pin functions against the existing PCB. Use a multi-channel RS-232 transceiver instead when the design requires more than one port, modern slew-rate control, or smaller surface-mount assembly. Because the verified material does not establish five pin-compatible substitutes, the exact SN75155P is the lowest-risk choice for production continuity. Confirm supply voltage, data rate, and receiver thresholds against the manufacturer data sheet before releasing a new design.

השוואה עם חלופות

פרמטר מוצר זה
Brand Texas Instruments
Package 8-pin PDIP (P)
Device Type RS-232 line driver and receiver
Transceiver Configuration 1/1 full-duplex
Number of Drivers 1
Number of Receivers 1
Interface Standard ANSI EIA/TIA-232-E
Operating Temperature Range 0°C to 70°C
Receiver Response Control Resistor or resistor and bias voltage connected to ground

מבדילים עיקריים

  • Single-package RS-232 driver and receiver with receiver response control (לעומתSN75155PE4)
  • Exact manufacturer-listed PDIP option (לעומתSN75155PG4)
  • Dedicated single-channel implementation (לעומתMC3488AP1)

הערות תכנון

Place the SN75155P close to the external RS-232 connector and route the driver output and receiver input as separate nets toward their respective connector pins. Keep the connector-side ground or return connection short and controlled, and avoid routing the receiver trace parallel to the driver trace on the same board layer. This arrangement reduces capacitive coupling between transmitted and received signals and helps prevent false receiver transitions from cable crosstalk.

Do not assume that a related SN75155-family suffix is automatically interchangeable with the SN75155P. The SN75155P is an 8-pin PDIP part, while comparison listings identify other family members with different packages. Before substitution, compare the package drawing, pin numbering, supply voltage, receiver thresholds, driver levels, and temperature rating. A footprint or function mismatch can require PCB changes or additional termination components.

Use the manufacturer response-control arrangement to tune the receiver, and connect only the resistor or resistor-and-bias network specified by the Texas Instruments data sheet. Keep this network close to the response-control pin and away from the logic-side return-current path. After layout completion, test with the intended cable and peripheral because long external cables can introduce noise that is not present during bench-level logic testing.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer data sheet states that the SN75155 targets ANSI EIA/TIA-232-E equipment interfaces. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the retrieved product information and are therefore recorded as unknown.

חיפושים קשורים

sn75155p datasheet SN75155P datasheet PDF SN75155P pinout SN75155P RS-232 transceiver SN75155P 8-pin PDIP SN75155P Texas Instruments SN75155P equivalent SN75155P replacement SN75155P vs SN75155PE4 SN75155P price SN75155P stock SN75155P line driver receiver application circuit SN75155P response control resistor

רכיבים ומונחים קשורים

Texas Instruments SN75155P SN75155 SN75155PE4 SN75155PG4 RS-232 ANSI EIA/TIA-232-E line driver line receiver RS-232 transceiver interface IC integrated circuit full-duplex communication response control input receiver noise control PDIP-8 through-hole package surface mount UART data terminal equipment data communication equipment DB-25 connector 0°C to 70°C RS-232 surge protection
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר